I've already done the *cheap* analog to NXDN :)... it's easy... I just connect my RTCM to the transcoded audio at the repeater. Poof done... analog to NXDN the easy way :) It actually sounds pretty good too... Alan -----Original Message----- From: Jeffrey S. Carrier [mailto:jeff.carrier@rmsmsecurity.com] Sent: Sunday, August 12, 2012 8:15 PM To: app_rpt-users@ohnosec.org; adamson_alan@hotmail.com Subject: RE: [App_rpt-users] d-star? How about a similar connection to a mototrbo system. That would be cool! K0jsc Jeffrey S. Carrier Fire Inspector, Plant Protection (719) 561-7199 direct (719) 561-6567 fax 1612 E. Abriendo Ave. Pueblo, Colorado 81004 jeffrey.carrier@evrazincna.com Sent from my Android phone using TouchDown -----Original Message----- From: Alan Adamson [adamson_alan@hotmail.com] Received: Sunday, 12 Aug 2012, 4:41pm To: 'Allstar User' [app_rpt-users@ohnosec.org] Subject: [App_rpt-users] d-star? I know this is probably old hat to most, but I think I have the world's most connectable allstar server :).. I've now got a B and C module of D-star (via freestar*) that I can connect in, my own experimental XRF reflector, I can cross link analog to digital, etc. What's most amazing is HOW GOOD IT SOUNDS, when the D-Star audio comes into the allstar server. I just decided that I didn't want to do the rptdir thing, so I'm using chan_dstar and the dextra_client.. And it really sounds good. I'm scratching my head as to why this was so frowned on in the beginning of time (not from the allstar guys, but the d-star guys). Anyway, I think if I had everything connected up, it's like 2 full duplex repeaters, a full duplex IRLP connection, and a d-star gateway, but 2 simplex bases, one for d-star one for allstar.. Good think I had a whole bunch of 25W dummy loads :). since I got everything working, I just figured I'd share. while it wasn't brain dead easy, it wasn't too difficult either. Alan