This morning I followed the advice given by several members on the list. I added in the nodes section of both system 40968 = radio@192.168.20.1/40963,NONE <mailto:radio@192.168.20.1/40963,NONE> on the hub box 41488 = radio@192.168.20.1/41488,NONE <mailto:radio@192.168.20.1/41488,NONE> on the repeater box And I still get connection failed error messages Some back ground on what I have * Comcast internet * The Comcast supplied modem/router is bridged for modem gateway only * ASUS RT-AC68U Router which feeds a Cisco Switch which both boxes are currently plugged into * Node 41488 is my hub node and has port forwarding for port 4572 which it is assigned and configured * NODE 40968 is my repeater node and port forwarding for port 4569 which it is assigned and configured * Both machines for the moment have ssh of 222 (default) set * 41488 (my hub) is using static ip (on my LAN) of 192.168.20.235 * 40968 (my repeater) is using static ip (on my LAN) of 192.168.20.243 The repeater was working fine up until about a month ago when It quit connecting to any nodes. This morning I reset my router and reconfigured anything – no change This morning I reformatted my repeater box and reconfigured using the Allstar Portal – no change When I attempt to connect my repeater to my hub, which is on the same LAN with the node settings added that are listed above I get this error message on the CLI [Dec 28 08:37:53] WARNING[2500]: chan_iax2.c:4328 handle_call_token: Address 192 .168.20.243 failed CallToken hash inspection [Dec 28 08:37:55] WARNING[2508]: chan_iax2.c:4328 handle_call_token: Address 192 .168.20.243 failed CallToken hash inspection [Dec 28 08:38:05] WARNING[2500]: chan_iax2.c:4328 handle_call_token: Address 192 .168.20.243 failed CallToken hash inspection K0PWO_Hub*CLI> [Dec 28 08:37:53] WARNING[2500]: chan_iax2.c:4328 handle_call_tok en: Address 192.168.20.243 failed CallToken hash inspection K0PWO_Hub*CLI> [Dec 28 08:37:55] WARNING[2508]: chan_iax2.c:4328 handle_call_tok en: Address 192.168.20.243 failed CallToken hash inspection No such command '[Dec 28 08:37:53] WARNING[2500]: chan_iax2.c:4328 handle_call_t oken: Address 192.168.20.243 failed CallToken hash inspection' (type 'help [Dec 28' for other possible commands) No such command '[Dec 28 08:37:55] WARNING[2508]: chan_iax2.c:4328 handle_call_t oken: Address 192.168.20.243 failed CallToken hash inspection' (type 'help [Dec 28' for other possible commands) K0PWO_Hub*CLI> [Dec 28 08:38:05] WARNING[2500]: chan_iax2.c:4328 handle_call_tok en: Address 192.168.20.243 failed CallToken hash inspection[Dec 28 08:37:53] WAR NING[2500]: chan_iax2.c:4328 handle_call_token: Address 192.168.20.243 failed Ca llToken hash inspection K0PWO_Hub*CLI> [Dec 28 08:37:55] WARNING[2508]: chan_iax2.c:4328 handle_call_tok en: Address 192.168.20.243 failed CallToken hash inspection No such command '[Dec 28 08:38:05] WARNING[2500]: chan_iax2.c:4328 handle_call_t oken: Address 192.168.20.243 failed CallToken hash inspection[Dec 28 08:37:53] W ARNING[2500]: chan_iax2.c:4328 handle_call_token: Address 192.168.20.243 failed CallToken hash inspection' (type 'help [Dec 28' for other possible commands) No such command '[Dec 28 08:37:55] WARNING[2508]: chan_iax2.c:4328 handle_call_t oken: Address 192.168.20.243 failed CallToken hash inspection' (type 'help [Dec 28' for other possible commands) K0PWO_Hub*CLI> [Dec 28 08:38:05] WARNING[2500]: chan_iax2.c:4328 handle_call_tok en: Address 192.168.20.243 failed CallToken hash inspectionexit No such command '[Dec 28 08:38:05] WARNING[2500]: chan_iax2.c:4328 handle_call_t oken: Address 192.168.20.243 failed CallToken hash inspectionexit' (type 'help [ Dec 28' for other possible commands) Once again, anybody have any ideas on what is wrong? Thank you for any help provided. David