Duplex=1 in rpt.conf Half duplex with telemetry tones and hang time. Does not repeat audio. This mode is preferred when interfacing a simplex node. Mike From: Steve Zingman <szingman@msgstor.com> Organization: MSGStor Reply-To: <szingman@msgstor.com> Date: Wednesday, September 7, 2016 at 1:48 PM To: Michael Wolthuis <wolthuis@gmail.com>, "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] Assistance with TM-d710 and URI-x with DIAL What duplex mode are you set to in rpt.conf? On 9/7/2016 9:53 AM, Michael J. Wolthuis wrote: I am helping a friend with a new node. He has a URI-X, Kenwood TM-d710 and DIAL. TX audio is working fine. RX audio is not. I have the usbradio.conf file set with carrierfrom=usb If I change it to carrierfrom=usbinvert then I can get DTMF through and audio, but it is keyed 100% of the time and no TXAudio works. So it seems it should be set for usb. I tried DSP, didn’t seem to work either. The cable between the URI-X and the d710 uses the PS2 connector and is a pre-made cable from uricables.com I am at a loss of what else to try, should I build the loopback tester that I see in the archives? Mike Kb8zgl _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- "Just say no to world domination"