Assistance with TM-d710 and URI-x with DIAL
I am helping a friend with a new node. He has a URI-X, Kenwood TM-d710 and DIAL. TX audio is working fine. RX audio is not. I have the usbradio.conf file set with carrierfrom=usb If I change it to carrierfrom=usbinvert then I can get DTMF through and audio, but it is keyed 100% of the time and no TXAudio works. So it seems it should be set for usb. I tried DSP, didn’t seem to work either. The cable between the URI-X and the d710 uses the PS2 connector and is a pre-made cable from uricables.com I am at a loss of what else to try, should I build the loopback tester that I see in the archives? Mike Kb8zgl
I am helping a friend with a new node. He has a URI-X, Kenwood TM-d710 and DIAL. TX audio is working fine. RX audio is not. I have the usbradio.conf file set with carrierfrom=usb If I change it to carrierfrom=usbinvert then I can get DTMF through and audio, but it is keyed 100% of the time and no TXAudio works. So it seems it should be set for usb. I tried DSP, didn’t seem to work either. The cable between the URI-X and the d710 uses the PS2 connector and is a pre-made cable from uricables.com I am at a loss of what else to try, should I build the loopback tester that I see in the archives? Mike Kb8zgl
What duplex mode are you set to in rpt.conf? On 9/7/2016 9:53 AM, Michael J. Wolthuis wrote:
I am helping a friend with a new node. He has a URI-X, Kenwood TM-d710 and DIAL.
TX audio is working fine.
RX audio is not. I have the usbradio.conf file set with carrierfrom=usb
If I change it to carrierfrom=usbinvert then I can get DTMF through and audio, but it is keyed 100% of the time and no TXAudio works.
So it seems it should be set for usb.
I tried DSP, didn’t seem to work either.
The cable between the URI-X and the d710 uses the PS2 connector and is a pre-made cable from uricables.com
I am at a loss of what else to try, should I build the loopback tester that I see in the archives?
Mike
Kb8zgl
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Just say no to world domination" windowtext;} span.msoIns {mso-style-type:export-only; mso-style-name:""; text-decoration:underline; color:teal;} .MsoChpDefault {mso-style-type:export-only; font-size:10.0pt;} @page WordSection1 {size:8.5in 11.0in; margin:1.0in 1.0in 1.0in 1.0in;} div.WordSection1 {page:WordSection1;} --></style> <div class="WordSection1"> <p class="MsoNormal"><span style="font-size:11.0pt">I am helping a friend with a new node. He has a URI-X, Kenwood TM-d710 and DIAL.</span><o:p></o:p></p> <p class="MsoNormal"><span style="font-size:11.0pt"> </span><o:p></o:p></p> <p class="MsoNormal"><span style="font-size:11.0pt">TX audio is working fine.</span><o:p></o:p></p> <p class="MsoNormal"><span style="font-size:11.0pt">RX audio is not. I have the usbradio.conf file set with carrierfrom=usb</span><o:p></o:p></p> <p class="MsoNormal"><span style="font-size:11.0pt"> </span><o:p></o:p></p> <p class="MsoNormal"><span style="font-size:11.0pt">If I change it to carrierfrom=usbinvert then I can get DTMF through and audio, but it is keyed 100% of the time and no TXAudio works.</span><o:p></o:p></p> <p class="MsoNormal"><span style="font-size:11.0pt"> </span><o:p></o:p></p> <p class="MsoNormal"><span style="font-size:11.0pt">So it seems it should be set for usb.</span><o:p></o:p></p> <p class="MsoNormal"><span style="font-size:11.0pt"> </span><o:p></o:p></p> <p class="MsoNormal"><span style="font-size:11.0pt">I tried DSP, didn’t seem to work either.</span><o:p></o:p></p> <p class="MsoNormal"><span style="font-size:11.0pt"> </span><o:p></o:p></p> <p class="MsoNormal"><span style="font-size:11.0pt">The cable between the URI-X and the d710 uses the PS2 connector and is a pre-made cable from uricables.com</span><o:p></o:p></p> <p class="MsoNormal"><span style="font-size:11.0pt"> </span><o:p></o:p></p> <p class="MsoNormal"><span style="font-size:11.0pt">I am at a loss of what else to try, should I build the loopback tester that I see in the archives?</span><o:p></o:p></p> <p class="MsoNormal"><span style="font-size:11.0pt"> </span><o:p></o:p></p> <p class="MsoNormal"><span style="font-size:11.0pt">Mike</span><o:p></o:p></p> <p class="MsoNormal"><span style="font-size:11.0pt">Kb8zgl</span><o:p></o:p></p> <p class="MsoNormal"><span style="font-size:11.0pt"> </span><o:p></o:p></p> </div> <br> <fieldset class="mimeAttachmentHeader"></fieldset> <br> <pre wrap="">_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. </pre> </blockquote> <br> <pre class="moz-signature" cols="72">-- "Just say no to world domination" </pre> </body> </html>
Duplex=1 in rpt.conf Half duplex with telemetry tones and hang time. Does not repeat audio. This mode is preferred when interfacing a simplex node. Mike From: Steve Zingman <szingman@msgstor.com> Organization: MSGStor Reply-To: <szingman@msgstor.com> Date: Wednesday, September 7, 2016 at 1:48 PM To: Michael Wolthuis <wolthuis@gmail.com>, "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] Assistance with TM-d710 and URI-x with DIAL What duplex mode are you set to in rpt.conf? On 9/7/2016 9:53 AM, Michael J. Wolthuis wrote: I am helping a friend with a new node. He has a URI-X, Kenwood TM-d710 and DIAL. TX audio is working fine. RX audio is not. I have the usbradio.conf file set with carrierfrom=usb If I change it to carrierfrom=usbinvert then I can get DTMF through and audio, but it is keyed 100% of the time and no TXAudio works. So it seems it should be set for usb. I tried DSP, didn’t seem to work either. The cable between the URI-X and the d710 uses the PS2 connector and is a pre-made cable from uricables.com I am at a loss of what else to try, should I build the loopback tester that I see in the archives? Mike Kb8zgl _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- "Just say no to world domination"
First of all the default configs are set for full duplex. (Even if the duplex setting is not stated in RPT.conf) Since you are connecting to a half duplex radio, you will need to set duplex =1 or 0 in rpt.conf. And set the duplex setting in simpleUSB or USBradio to half duplex (duplex=0). If the node is in full duplex, the moment the URI sees a signal it will key the radio. Also, you need to know what the logic is for the Sq on the PS 2 port on the Kenwood. Does the line go HI on RX or go low? Once you have determined the cor logic, you need to know if it pulls to ground when it goes low. The COR and PL decode inputs on the URI need to see a signal that transitions to ground. It doesn't matter if its active hi or low. The URI will never see an input signal if it it simply goes hi but doesn't go to ground. If the kenwood signal doesn't go to ground then you may need to drive an NPN transistor and connect the collector to the URI so it sees a transition to ground. The URI doesnt care about input voltage, it only cares if the input was grounded or not. The COR and PL inputs are pulled up internally and diode isolated. also check to see if the SQ line goes active during transmit on the Kenwood. I had this problen on an Icom ic 208 when connected to the packet port. the SQ line was active on receive and transmit. I had to use DSP and the discriminator connection on the PS 2 port to get around that. Hope this helps On 9/6/2016 8:20 PM, Michael J. Wolthuis wrote:
I am helping a friend with a new node. He has a URI-X, Kenwood TM-d710 and DIAL.
TX audio is working fine.
RX audio is not. I have the usbradio.conf file set with carrierfrom=usb
If I change it to carrierfrom=usbinvert then I can get DTMF through and audio, but it is keyed 100% of the time and no TXAudio works.
So it seems it should be set for usb.
I tried DSP, didn’t seem to work either.
The cable between the URI-X and the d710 uses the PS2 connector and is a pre-made cable from uricables.com
I am at a loss of what else to try, should I build the loopback tester that I see in the archives?
Mike
Kb8zgl
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (3)
-
Jon Rorke -
Michael J. Wolthuis -
Steve Zingman