Simplex. (duplex=0) Talks directly to and listens to a repeater, but the repeater's TX PL goes away when no input. It gets a quick "glimpse" of it once in a while and causes a "bounceback". 100ms delay or less would cure that. ----- Original Message ----- From: mike@midnighteng.com To: KJ6KO Sent: Wednesday, August 28, 2013 8:44 AM Subject: RE: [App_rpt-users] RXONDELAY not working? I "think" that it's use is dependent on duplex mode ?? What duplex mode are you using in rpt.conf? mike/kb8jnm -------- Original Message -------- Subject: [App_rpt-users] RXONDELAY not working? From: "KJ6KO" <kj6ko@innercite.com> Date: Wed, August 28, 2013 11:15 am To: <App_rpt-users@ohnosec.org> simpleusb.conf setting rxondelay=x to any number makes no difference. Does something else need to be set for it to work? Tried it from 2 up to 50 and no change in the actual delay. Anyone? Saw another identical post from 2011 and there was NO reply! Thanks... KJ6KO __________ Information from ESET NOD32 Antivirus, version of virus signature database 8738 (20130828) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com