not sure what you are streaming *to*? if you are using a 3rd party streaming server, you may have to log onto that service (its control panel or dashboard or whatever) and restart the service from that end - particularly if you have changed something. GL Ken -----Original Message----- From: pete M <petem001@hotmail.com> To: APP RPT <App_rpt-users@ohnosec.org> Sent: Mon, Jan 7, 2013 12:33 pm Subject: [App_rpt-users] no more streaming.. Hi! I have installed as Buddy Brannan, KB5ELV told me the ezstream software to eed a stream to radioreference.com so that our user could hear our system ike we used to do, but this was from a wmencoder in windows and this was eed by port 3 of the rc-210 we have at the repeater site. so I got this file: http://allstarlink.org/acid-stream.tar.gz untar it and started the compiling/installing all went well. then I added to my rpt.conf file under the 27821 (my node number) section his: outstreamcmd=/bin/sh,-c,/usr/bin/lame --preset cbr 16 -r -m m -s .0 --bitwidth 16 --resample 22050 - - | /usr/bin/ezstream -c etc/ezstream.xml all was working A1 . But cause there is allways a BUT... After asking the llstar server to reload my node (cause I goofed with some stuff.) the tream did not started back.. of course went back to rpt.conf and did as before with the outstreamcmd ommand. but still no go. anyone have an Idea what could be causing this? ______________________________________________ pp_rpt-users mailing list pp_rpt-users@ohnosec.org ttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users