Make SURE you do the power control mod!!!!!! These radios do stupid things...like 2 watts one time and 18 the next time. They run hot. NOT a good choice for a Node radio. On Fri, Jul 5, 2019 at 9:20 PM Pierre Martel <petem001@gmail.com> wrote:
Hello to the group, Got a pair of GTX900 mobile radio and got them tuned (mostly ok) to the ham band.
I now want to use them for repeater use in the 900 mhz band.
I went to repeater builder page and used all the info I could for the interfacing.
I did went for flat audio connection, as stated on the gtx900 page I used pin 7 and 11 for the receiver audio out. And I did put the dip switch close to the interfacing jack to off as specified. I then tried to do a radio tune rxnoise but it always fail. I want to use the dsp fonction of usbradio as it is way easier then getting a cor output on the gtx900.
Anyone ever used those radio with ASL?
thanks VE2PF
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.