Hello to the group, Got a pair of GTX900 mobile radio and got them tuned (mostly ok) to the ham band. I now want to use them for repeater use in the 900 mhz band. I went to repeater builder page and used all the info I could for the interfacing. I did went for flat audio connection, as stated on the gtx900 page I used pin 7 and 11 for the receiver audio out. And I did put the dip switch close to the interfacing jack to off as specified. I then tried to do a radio tune rxnoise but it always fail. I want to use the dsp fonction of usbradio as it is way easier then getting a cor output on the gtx900. Anyone ever used those radio with ASL? thanks VE2PF
Make SURE you do the power control mod!!!!!! These radios do stupid things...like 2 watts one time and 18 the next time. They run hot. NOT a good choice for a Node radio. On Fri, Jul 5, 2019 at 9:20 PM Pierre Martel <petem001@gmail.com> wrote:
Hello to the group, Got a pair of GTX900 mobile radio and got them tuned (mostly ok) to the ham band.
I now want to use them for repeater use in the 900 mhz band.
I went to repeater builder page and used all the info I could for the interfacing.
I did went for flat audio connection, as stated on the gtx900 page I used pin 7 and 11 for the receiver audio out. And I did put the dip switch close to the interfacing jack to off as specified. I then tried to do a radio tune rxnoise but it always fail. I want to use the dsp fonction of usbradio as it is way easier then getting a cor output on the gtx900.
Anyone ever used those radio with ASL?
thanks VE2PF
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Thats in the to do list. But I want to have it interfaced properly before doing this. Cause if I cant get those radio running good with allstarlink, I wont mess with the rest of the mods.. Le sam. 6 juil. 2019 à 02:05, Kirk Just Kirk <wb6egr@gmail.com> a écrit :
Make SURE you do the power control mod!!!!!! These radios do stupid things...like 2 watts one time and 18 the next time. They run hot. NOT a good choice for a Node radio.
On Fri, Jul 5, 2019 at 9:20 PM Pierre Martel <petem001@gmail.com> wrote:
Hello to the group, Got a pair of GTX900 mobile radio and got them tuned (mostly ok) to the ham band.
I now want to use them for repeater use in the 900 mhz band.
I went to repeater builder page and used all the info I could for the interfacing.
I did went for flat audio connection, as stated on the gtx900 page I used pin 7 and 11 for the receiver audio out. And I did put the dip switch close to the interfacing jack to off as specified. I then tried to do a radio tune rxnoise but it always fail. I want to use the dsp fonction of usbradio as it is way easier then getting a cor output on the gtx900.
Anyone ever used those radio with ASL?
thanks VE2PF
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
I forgot to say that I am using a URI-X , the one with the cm108 chips. It is aleast 6 years old. Le sam. 6 juil. 2019 à 00:20, Pierre Martel <petem001@gmail.com> a écrit :
Hello to the group, Got a pair of GTX900 mobile radio and got them tuned (mostly ok) to the ham band.
I now want to use them for repeater use in the 900 mhz band.
I went to repeater builder page and used all the info I could for the interfacing.
I did went for flat audio connection, as stated on the gtx900 page I used pin 7 and 11 for the receiver audio out. And I did put the dip switch close to the interfacing jack to off as specified. I then tried to do a radio tune rxnoise but it always fail. I want to use the dsp fonction of usbradio as it is way easier then getting a cor output on the gtx900.
Anyone ever used those radio with ASL?
thanks VE2PF
What are you going to use a a RCVR (902.xxxx) Mhz? On Sat, Jul 6, 2019 at 5:48 AM Pierre Martel <petem001@gmail.com> wrote:
Thats in the to do list. But I want to have it interfaced properly before doing this. Cause if I cant get those radio running good with allstarlink, I wont mess with the rest of the mods..
Le sam. 6 juil. 2019 à 02:05, Kirk Just Kirk <wb6egr@gmail.com> a écrit :
Make SURE you do the power control mod!!!!!! These radios do stupid things...like 2 watts one time and 18 the next time. They run hot. NOT a good choice for a Node radio.
On Fri, Jul 5, 2019 at 9:20 PM Pierre Martel <petem001@gmail.com> wrote:
Hello to the group, Got a pair of GTX900 mobile radio and got them tuned (mostly ok) to the ham band.
I now want to use them for repeater use in the 900 mhz band.
I went to repeater builder page and used all the info I could for the interfacing.
I did went for flat audio connection, as stated on the gtx900 page I used pin 7 and 11 for the receiver audio out. And I did put the dip switch close to the interfacing jack to off as specified. I then tried to do a radio tune rxnoise but it always fail. I want to use the dsp fonction of usbradio as it is way easier then getting a cor output on the gtx900.
Anyone ever used those radio with ASL?
thanks VE2PF
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
902.400rx 927.400 tx Le sam. 6 juil. 2019 à 08:57, Kirk Just Kirk <wb6egr@gmail.com> a écrit :
What are you going to use a a RCVR (902.xxxx) Mhz?
On Sat, Jul 6, 2019 at 5:48 AM Pierre Martel <petem001@gmail.com> wrote:
Thats in the to do list. But I want to have it interfaced properly before doing this. Cause if I cant get those radio running good with allstarlink, I wont mess with the rest of the mods..
Le sam. 6 juil. 2019 à 02:05, Kirk Just Kirk <wb6egr@gmail.com> a écrit :
Make SURE you do the power control mod!!!!!! These radios do stupid things...like 2 watts one time and 18 the next time. They run hot. NOT a good choice for a Node radio.
On Fri, Jul 5, 2019 at 9:20 PM Pierre Martel <petem001@gmail.com> wrote:
Hello to the group, Got a pair of GTX900 mobile radio and got them tuned (mostly ok) to the ham band.
I now want to use them for repeater use in the 900 mhz band.
I went to repeater builder page and used all the info I could for the interfacing.
I did went for flat audio connection, as stated on the gtx900 page I used pin 7 and 11 for the receiver audio out. And I did put the dip switch close to the interfacing jack to off as specified. I then tried to do a radio tune rxnoise but it always fail. I want to use the dsp fonction of usbradio as it is way easier then getting a cor output on the gtx900.
Anyone ever used those radio with ASL?
thanks VE2PF
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
what he was asking is what hardware you’re going to use to receive @902 MHZ? The GTX is beyond being stone deaf at that frequency, so if you were planning to use one as a receiver, you will not be receiving anything. It’s pretty hard to build a cheap radio (and the GTX is a cheap radio, considering) with 25 MHZ of bandwidth between shared components on the board. -- Bryan Sent from my iPhone 6S...No electrons were harmed in the sending of this message.
On Jul 6, 2019, at 10:06, Pierre Martel <petem001@gmail.com> wrote:
902.400rx 927.400 tx
Le sam. 6 juil. 2019 à 08:57, Kirk Just Kirk <wb6egr@gmail.com> a écrit : What are you going to use a a RCVR (902.xxxx) Mhz?
On Sat, Jul 6, 2019 at 5:48 AM Pierre Martel <petem001@gmail.com> wrote: Thats in the to do list. But I want to have it interfaced properly before doing this. Cause if I cant get those radio running good with allstarlink, I wont mess with the rest of the mods..
Le sam. 6 juil. 2019 à 02:05, Kirk Just Kirk <wb6egr@gmail.com> a écrit : Make SURE you do the power control mod!!!!!! These radios do stupid things...like 2 watts one time and 18 the next time. They run hot. NOT a good choice for a Node radio.
On Fri, Jul 5, 2019 at 9:20 PM Pierre Martel <petem001@gmail.com> wrote:
Hello to the group, Got a pair of GTX900 mobile radio and got them tuned (mostly ok) to the ham band.
I now want to use them for repeater use in the 900 mhz band.
I went to repeater builder page and used all the info I could for the interfacing.
I did went for flat audio connection, as stated on the gtx900 page I used pin 7 and 11 for the receiver audio out. And I did put the dip switch close to the interfacing jack to off as specified. I then tried to do a radio tune rxnoise but it always fail. I want to use the dsp fonction of usbradio as it is way easier then getting a cor output on the gtx900.
Anyone ever used those radio with ASL?
thanks VE2PF
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
We are using other gtx900. They are not that sensible, but with a repeater at a good spot it works pretty good. Le sam. 6 juil. 2019 à 10:16, Bryan D. Boyle <bdboyle@bdboyle.com> a écrit :
what he was asking is what hardware you’re going to use to receive @902 MHZ?
The GTX is beyond being stone deaf at that frequency, so if you were planning to use one as a receiver, you will not be receiving anything.
It’s pretty hard to build a cheap radio (and the GTX is a cheap radio, considering) with 25 MHZ of bandwidth between shared components on the board.
-- Bryan Sent from my iPhone 6S...No electrons were harmed in the sending of this message.
On Jul 6, 2019, at 10:06, Pierre Martel <petem001@gmail.com> wrote:
902.400rx 927.400 tx
Le sam. 6 juil. 2019 à 08:57, Kirk Just Kirk <wb6egr@gmail.com> a écrit :
What are you going to use a a RCVR (902.xxxx) Mhz?
On Sat, Jul 6, 2019 at 5:48 AM Pierre Martel <petem001@gmail.com> wrote:
Thats in the to do list. But I want to have it interfaced properly before doing this. Cause if I cant get those radio running good with allstarlink, I wont mess with the rest of the mods..
Le sam. 6 juil. 2019 à 02:05, Kirk Just Kirk <wb6egr@gmail.com> a écrit :
Make SURE you do the power control mod!!!!!! These radios do stupid things...like 2 watts one time and 18 the next time. They run hot. NOT a good choice for a Node radio.
On Fri, Jul 5, 2019 at 9:20 PM Pierre Martel <petem001@gmail.com> wrote:
Hello to the group, Got a pair of GTX900 mobile radio and got them tuned (mostly ok) to the ham band.
I now want to use them for repeater use in the 900 mhz band.
I went to repeater builder page and used all the info I could for the interfacing.
I did went for flat audio connection, as stated on the gtx900 page I used pin 7 and 11 for the receiver audio out. And I did put the dip switch close to the interfacing jack to off as specified. I then tried to do a radio tune rxnoise but it always fail. I want to use the dsp fonction of usbradio as it is way easier then getting a cor output on the gtx900.
Anyone ever used those radio with ASL?
thanks VE2PF
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Nope....it wont hear for beans at 902..... use a 800 maxtrac with the injection upside down....Take the 936Mhz filters out and put a cavity in front of it... On Sat, Jul 6, 2019 at 7:29 AM Pierre Martel <petem001@gmail.com> wrote:
We are using other gtx900. They are not that sensible, but with a repeater at a good spot it works pretty good.
Le sam. 6 juil. 2019 à 10:16, Bryan D. Boyle <bdboyle@bdboyle.com> a écrit :
what he was asking is what hardware you’re going to use to receive @902 MHZ?
The GTX is beyond being stone deaf at that frequency, so if you were planning to use one as a receiver, you will not be receiving anything.
It’s pretty hard to build a cheap radio (and the GTX is a cheap radio, considering) with 25 MHZ of bandwidth between shared components on the board.
-- Bryan Sent from my iPhone 6S...No electrons were harmed in the sending of this message.
On Jul 6, 2019, at 10:06, Pierre Martel <petem001@gmail.com> wrote:
902.400rx 927.400 tx
Le sam. 6 juil. 2019 à 08:57, Kirk Just Kirk <wb6egr@gmail.com> a écrit :
What are you going to use a a RCVR (902.xxxx) Mhz?
On Sat, Jul 6, 2019 at 5:48 AM Pierre Martel <petem001@gmail.com> wrote:
Thats in the to do list. But I want to have it interfaced properly before doing this. Cause if I cant get those radio running good with allstarlink, I wont mess with the rest of the mods..
Le sam. 6 juil. 2019 à 02:05, Kirk Just Kirk <wb6egr@gmail.com> a écrit :
Make SURE you do the power control mod!!!!!! These radios do stupid things...like 2 watts one time and 18 the next time. They run hot. NOT a good choice for a Node radio.
On Fri, Jul 5, 2019 at 9:20 PM Pierre Martel <petem001@gmail.com> wrote:
Hello to the group, Got a pair of GTX900 mobile radio and got them tuned (mostly ok) to the ham band.
I now want to use them for repeater use in the 900 mhz band.
I went to repeater builder page and used all the info I could for the interfacing.
I did went for flat audio connection, as stated on the gtx900 page I used pin 7 and 11 for the receiver audio out. And I did put the dip switch close to the interfacing jack to off as specified. I then tried to do a radio tune rxnoise but it always fail. I want to use the dsp fonction of usbradio as it is way easier then getting a cor output on the gtx900.
Anyone ever used those radio with ASL?
thanks VE2PF
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
the tech that got them tuned told us they were low but not that much.. Could that be the reason I just cant have the receive side to even have enough noise in it to properly do radio tune rxnoise? Le sam. 6 juil. 2019 à 12:17, Kirk Just Kirk <wb6egr@gmail.com> a écrit :
Nope....it wont hear for beans at 902..... use a 800 maxtrac with the injection upside down....Take the 936Mhz filters out and put a cavity in front of it...
On Sat, Jul 6, 2019 at 7:29 AM Pierre Martel <petem001@gmail.com> wrote:
We are using other gtx900. They are not that sensible, but with a repeater at a good spot it works pretty good.
Le sam. 6 juil. 2019 à 10:16, Bryan D. Boyle <bdboyle@bdboyle.com> a écrit :
what he was asking is what hardware you’re going to use to receive @902 MHZ?
The GTX is beyond being stone deaf at that frequency, so if you were planning to use one as a receiver, you will not be receiving anything.
It’s pretty hard to build a cheap radio (and the GTX is a cheap radio, considering) with 25 MHZ of bandwidth between shared components on the board.
-- Bryan Sent from my iPhone 6S...No electrons were harmed in the sending of this message.
On Jul 6, 2019, at 10:06, Pierre Martel <petem001@gmail.com> wrote:
902.400rx 927.400 tx
Le sam. 6 juil. 2019 à 08:57, Kirk Just Kirk <wb6egr@gmail.com> a écrit :
What are you going to use a a RCVR (902.xxxx) Mhz?
On Sat, Jul 6, 2019 at 5:48 AM Pierre Martel <petem001@gmail.com> wrote:
Thats in the to do list. But I want to have it interfaced properly before doing this. Cause if I cant get those radio running good with allstarlink, I wont mess with the rest of the mods..
Le sam. 6 juil. 2019 à 02:05, Kirk Just Kirk <wb6egr@gmail.com> a écrit :
Make SURE you do the power control mod!!!!!! These radios do stupid things...like 2 watts one time and 18 the next time. They run hot. NOT a good choice for a Node radio.
On Fri, Jul 5, 2019 at 9:20 PM Pierre Martel <petem001@gmail.com> wrote:
Hello to the group, Got a pair of GTX900 mobile radio and got them tuned (mostly ok) to the ham band.
I now want to use them for repeater use in the 900 mhz band.
I went to repeater builder page and used all the info I could for the interfacing.
I did went for flat audio connection, as stated on the gtx900 page I used pin 7 and 11 for the receiver audio out. And I did put the dip switch close to the interfacing jack to off as specified. I then tried to do a radio tune rxnoise but it always fail. I want to use the dsp fonction of usbradio as it is way easier then getting a cor output on the gtx900.
Anyone ever used those radio with ASL?
thanks VE2PF
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (3)
-
Bryan D. Boyle -
Kirk Just Kirk -
Pierre Martel