does this create the config file for my server or for the allstar network? I've/we've manually created the machines using XIPAR. Rod On Sat, Feb 12, 2011 at 11:03 AM, Jim Duuuude <telesistant@hotmail.com>wrote:
Did you set the UDP port to 4568 in the server config on the portal??
------------------------------ Date: Sat, 12 Feb 2011 11:02:05 -0600 From: n2oyj.ham@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Node link on non-standard port
Got two nodes. Originally setup using standard port 4569. Changed ports to 4568 1) to see how it was done & 2) to separate the asterisk machines and set up home phone system (again).
Ports changed and connects to Allstar OK. iaxRPT works by adding port to IP address. So far no problem.
N0MIJ tries to connect via his Allstar node (also on non-standard port 4568) and he says the CLI show it trying to connect via the 4569 port. Q: have we missed something in changing ports? If so where and what? Q: the file which Allstar update: 1) can it be forced to update w/o restarting node? 2) are ports given in the updated file? 3) what file is it? so we can check/verify.
Rod N2OYJ
and for Eric - N0MIJ
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users