Got two nodes. Originally setup using standard port 4569. Changed ports to 4568 1) to see how it was done & 2) to separate the asterisk machines and set up home phone system (again). Ports changed and connects to Allstar OK. iaxRPT works by adding port to IP address. So far no problem. N0MIJ tries to connect via his Allstar node (also on non-standard port 4568) and he says the CLI show it trying to connect via the 4569 port. Q: have we missed something in changing ports? If so where and what? Q: the file which Allstar update: 1) can it be forced to update w/o restarting node? 2) are ports given in the updated file? 3) what file is it? so we can check/verify. Rod N2OYJ and for Eric - N0MIJ
Did you assign a static ip for each box on your router? did you open UDP ports 4568 for the one box's ip and 4569 for the other? And when you boot up the boxes, it usually takes about 10 min or so for the stats page to start showing up and every node out there gets the updated exten nodes file. If everything is working then should be able to connect. Just give it a little time Jon VA3RQ On 2/12/2011 12:02 PM, Rod Schnell wrote:
Got two nodes. Originally setup using standard port 4569. Changed ports to 4568 1) to see how it was done & 2) to separate the asterisk machines and set up home phone system (again).
Ports changed and connects to Allstar OK. iaxRPT works by adding port to IP address. So far no problem.
N0MIJ tries to connect via his Allstar node (also on non-standard port 4568) and he says the CLI show it trying to connect via the 4569 port. Q: have we missed something in changing ports? If so where and what? Q: the file which Allstar update: 1) can it be forced to update w/o restarting node? 2) are ports given in the updated file? 3) what file is it? so we can check/verify.
Rod N2OYJ
and for Eric - N0MIJ
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Did you set the UDP port to 4568 in the server config on the portal?? Date: Sat, 12 Feb 2011 11:02:05 -0600 From: n2oyj.ham@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Node link on non-standard port Got two nodes. Originally setup using standard port 4569. Changed ports to 4568 1) to see how it was done & 2) to separate the asterisk machines and set up home phone system (again). Ports changed and connects to Allstar OK. iaxRPT works by adding port to IP address. So far no problem. N0MIJ tries to connect via his Allstar node (also on non-standard port 4568) and he says the CLI show it trying to connect via the 4569 port. Q: have we missed something in changing ports? If so where and what? Q: the file which Allstar update: 1) can it be forced to update w/o restarting node? 2) are ports given in the updated file? 3) what file is it? so we can check/verify. RodN2OYJ and for Eric - N0MIJ _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
does this create the config file for my server or for the allstar network? I've/we've manually created the machines using XIPAR. Rod On Sat, Feb 12, 2011 at 11:03 AM, Jim Duuuude <telesistant@hotmail.com>wrote:
Did you set the UDP port to 4568 in the server config on the portal??
------------------------------ Date: Sat, 12 Feb 2011 11:02:05 -0600 From: n2oyj.ham@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Node link on non-standard port
Got two nodes. Originally setup using standard port 4569. Changed ports to 4568 1) to see how it was done & 2) to separate the asterisk machines and set up home phone system (again).
Ports changed and connects to Allstar OK. iaxRPT works by adding port to IP address. So far no problem.
N0MIJ tries to connect via his Allstar node (also on non-standard port 4568) and he says the CLI show it trying to connect via the 4569 port. Q: have we missed something in changing ports? If so where and what? Q: the file which Allstar update: 1) can it be forced to update w/o restarting node? 2) are ports given in the updated file? 3) what file is it? so we can check/verify.
Rod N2OYJ
and for Eric - N0MIJ
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (3)
-
Jim Duuuude -
REDBUTTON_CTRL -
Rod Schnell