Ron Are you trying to set up two repeaters that are linked so that the input from one is transmitted by both? If so, I am also very interested in how it is done as it is something we are proposing in our area. Howard VK4BS -----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Ron Morell Sent: Wednesday, 7 December 2011 01:01 To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Two remote nodes used to link two repeaters Hello, I'm new to Asterisk+app_rpt. Will this application connect two transceivers (remote nodes) using VoIP so that each transceiver node will transmit what it receives over the VoIP input from the RF receiving transceiver node? If it will, I'd appreciate some discussion as to how to setup this type of connection or direction to directions, if already written. I've been back reading the archives and have read most of this year's discussions. Lots of good info on this reflector. Thanks for your consideration. Ron Morell KA7U