I have a simplex node setup with a Baofeng 888. I receive ok (the periodic automated date and time) but when I transmit a command, I just hear a beep. On the Node Status page the "Total Keyups" increments each time I attempt to send a command. However, the "Total Commands Executed" remains at 0. "Total Timeouts" is also 0. It's as if the command is being received but not interpreted correctly? Any ideas? Thanks, Jay KI7SOX
The command complete (touch tone accepted) beep is different from the courtesy tone. Is the beep the same as the courtesy tone? A common reason for no touch tone decoding with a simplex node is when the node is in (the default) full duplex. Be sure you have a duplex=0 statement in (usually near the top) your node stanza. On Wed, Jul 11, 2018 at 11:39 AM Jay Poulos <osu49er@gmail.com> wrote:
I have a simplex node setup with a Baofeng 888. I receive ok (the periodic automated date and time) but when I transmit a command, I just hear a beep. On the Node Status page the "Total Keyups" increments each time I attempt to send a command. However, the "Total Commands Executed" remains at 0. "Total Timeouts" is also 0. It's as if the command is being received but not interpreted correctly? Any ideas?
Thanks,
Jay
KI7SOX _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Tim WD6AWP
Reading your whole and previous message Jay, I'm guessing you are not seeing results from your command ??? A successful command will at least give you a short kinda 'double beep'... bip bip even when being issued via sched/macro if the tx is up. But one of the first things to look for if you are having issues getting results from a command is to look for a conflicting commend in your set-up. Asterisk will always use the first match it can make anywhere in the channel/stanza it can. So if you had these commands 97 971 971 will never execute since 97 will get it first. So if you then convert all 97 commands to 3 digits 970 971 Would fix this problem Just something to look for. One other thing is that if you are issuing a command for a shell script cmd= make sure the path is correct and permissions for the file are correct hope that leads you somewhere but I'm not sure I fully understand your issue. from the console or a ssh window, type ' asterisk -r -vvv ' ( - three v's) to see how asterisk is responding to your commands. ...mike/kb8jnm On 07/18/2018 09:36 AM, Tim Sawyer wrote:
The command complete (touch tone accepted) beep is different from the courtesy tone. Is the beep the same as the courtesy tone?
A common reason for no touch tone decoding with a simplex node is when the node is in (the default) full duplex. Be sure you have a duplex=0 statement in (usually near the top) your node stanza.
On Wed, Jul 11, 2018 at 11:39 AM Jay Poulos <osu49er@gmail.com <mailto:osu49er@gmail.com>> wrote:
I have a simplex node setup with a Baofeng 888. I receive ok (the periodic automated date and time) but when I transmit a command, I just hear a beep. On the Node Status page the "Total Keyups" increments each time I attempt to send a command. However, the "Total Commands Executed" remains at 0. "Total Timeouts" is also 0. It's as if the command is being received but not interpreted correctly? Any ideas?
Thanks,
Jay
KI7SOX
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Tim WD6AWP
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
I struggled with something like this for a little while before I realized the DTMF tones from my Kenwood TH-G71A were not being decoded. Specifically the 3 digit. To test run: asterisk -rvvv then press every key on your DTMF keypad and watch what asterisk tells you. If they aren't decoding then find a radio that does (could also be RX audio level?). Danny K5CG From: "Mike" <mm@midnighteng.com> To: "Users of Asterisk app_rpt" <app_rpt-users@lists.allstarlink.org> Sent: Wednesday, July 18, 2018 8:50:27 AM Subject: Re: [App_rpt-users] Simplex node problem Reading your whole and previous message Jay, I'm guessing you are not seeing results from your command ??? A successful command will at least give you a short kinda 'double beep'... bip bip even when being issued via sched/macro if the tx is up. But one of the first things to look for if you are having issues getting results from a command is to look for a conflicting commend in your set-up. Asterisk will always use the first match it can make anywhere in the channel/stanza it can. So if you had these commands 97 971 971 will never execute since 97 will get it first. So if you then convert all 97 commands to 3 digits 970 971 Would fix this problem Just something to look for. One other thing is that if you are issuing a command for a shell script cmd= make sure the path is correct and permissions for the file are correct hope that leads you somewhere but I'm not sure I fully understand your issue. from the console or a ssh window, type ' asterisk -r -vvv ' ( - three v's) to see how asterisk is responding to your commands. ...mike/kb8jnm On 07/18/2018 09:36 AM, Tim Sawyer wrote: The command complete (touch tone accepted) beep is different from the courtesy tone. Is the beep the same as the courtesy tone? A common reason for no touch tone decoding with a simplex node is when the node is in (the default) full duplex. Be sure you have a duplex=0 statement in (usually near the top) your node stanza. On Wed, Jul 11, 2018 at 11:39 AM Jay Poulos < [ mailto:osu49er@gmail.com | osu49er@gmail.com ] > wrote: BQ_BEGIN I have a simplex node setup with a Baofeng 888. I receive ok (the periodic automated date and time) but when I transmit a command, I just hear a beep. On the Node Status page the "Total Keyups" increments each time I attempt to send a command. However, the "Total Commands Executed" remains at 0. "Total Timeouts" is also 0. It's as if the command is being received but not interpreted correctly? Any ideas? Thanks, Jay KI7SOX _______________________________________________ App_rpt-users mailing list [ mailto:App_rpt-users@lists.allstarlink.org | App_rpt-users@lists.allstarlink.org ] [ http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users | http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users ] To unsubscribe from this list please visit [ http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users | http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users ] and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- Tim WD6AWP _______________________________________________ App_rpt-users mailing list [ mailto:App_rpt-users@lists.allstarlink.org | App_rpt-users@lists.allstarlink.org ] [ http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users | http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users ] To unsubscribe from this list please visit [ http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users | http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users ] and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. BQ_END _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (4)
-
Danny K5CG -
Jay Poulos -
Mike -
Tim Sawyer