Changing Courtesy Tones, and SSHing into the computer
Hello, I am new ham in high school, and finally got a little SIMPLEX repeater up and running. *My first question* Is about SSHing into the computer remotely. I first gave it a try on my LAN, because I knew port forwarding would not be required. First, I *Changed *the port 222 to port 22 on the SSHD_Config file We are using an apple airport router, which states the LAN address of the Ethernet port is 10.0.1.1. I typed ssh root@10.0.1.1, and I got a connection refused. I was able to reverse SSH back to my macintosh using ssh username@computersLANip from ACID, but when I tried to SSH back to acid, it would not work. Just Connection Refused. After I login on ACID it says Root@Skylersnode, my node, and I also gave ssh root@<node number> and ssh skylersnode@local IP a try, but still no success. Are there any suggestions on getting this to work? *Second question: Courtesy tones,* I just figured out how to create a ULAW on audacity, and mount a flash drive on the command, and I am wondering if I can change the courtesy tones or any other audio file. Like the "I OWN COMMAND" annoying thing. Where would the courtesy tones be located, and under what file name? *Third question: *why it wont work on the web transceiver When I dial in the node on the web transceiver, nothing happens, and when I hit the connect button, it does not do anything. Is there any way to get it to work, or will the web transceiver not work with my node. I would think it should work, because I have almost the same setup as Willem's node, 29571<https://allstarlink.org/portal/webtransceiver-frameset.php?nodenum=29571>,on saddle back mountain. *Last Question: Won't connect to 28298 or 28299* This node is part of the FUN system here in Colorado, and I tried dialing 28298, which belongs to Jeff KØJSC, but I heard nothing, not even the change in courtesy tone. He has no idea why my node will not connect up, but it is weird because it won't even show up on the web transceiver. Thanks Skyler KDØWHB
SSH: I assume you restarted the sshd after changing the port or reboot the allstar box either way - /etc/rc3.d/S55sshd restart should do it. Btw what is the trick to getting uLaw files via Audacity? Courtesy tones, have to look under the [Telemetry] section and change the freq/numbers there - in /etc/asterisk/rpt.conf do you have the line in rpt.conf? <node> = radio@127.0.0.1/<node>,NONE And the one in /etc/asterisk/iax.conf register=<node>:<secret>@register.allstarlink.org Assuming the port 4569 is setup correctly, can you connect from the allstar dial in # from any std telephone? "Got Root?" How many software engineers does it take to change a light bulb? *None. It's a hardware problem.* Unix is user friendly. It's just very particular about who it's friends are. WINDOWS: Will Install Needless Data On Whole System MICROSOFT: Most Intelligent Customers Realize Our Software Only Fools Teenagers. A ntennas P oorly P laced L acks E ngineering The best way to accelerate a computer running Windows is at 9.81 m/s². *"I get paid to support Windows, I use Linux to get work done."* On Fri, Apr 18, 2014 at 7:14 AM, Skyler F <electricity440@gmail.com> wrote:
Hello,
I am new ham in high school, and finally got a little SIMPLEX repeater up and running.
*My first question* Is about SSHing into the computer remotely. I first gave it a try on my LAN, because I knew port forwarding would not be required.
First, I *Changed *the port 222 to port 22 on the SSHD_Config file
We are using an apple airport router, which states the LAN address of the Ethernet port is 10.0.1.1. I typed ssh root@10.0.1.1, and I got a connection refused.
I was able to reverse SSH back to my macintosh using ssh username@computersLANip from ACID, but when I tried to SSH back to acid, it would not work. Just Connection Refused.
After I login on ACID it says Root@Skylersnode, my node, and I also gave ssh root@<node number> and ssh skylersnode@local IP a try, but still no success.
Are there any suggestions on getting this to work?
*Second question: Courtesy tones,*
I just figured out how to create a ULAW on audacity, and mount a flash drive on the command, and I am wondering if I can change the courtesy tones or any other audio file. Like the "I OWN COMMAND" annoying thing. Where would the courtesy tones be located, and under what file name?
*Third question: *why it wont work on the web transceiver
When I dial in the node on the web transceiver, nothing happens, and when I hit the connect button, it does not do anything. Is there any way to get it to work, or will the web transceiver not work with my node. I would think it should work, because I have almost the same setup as Willem's node, 29571<https://allstarlink.org/portal/webtransceiver-frameset.php?nodenum=29571>,on saddle back mountain.
*Last Question: Won't connect to 28298 or 28299* This node is part of the FUN system here in Colorado, and I tried dialing 28298, which belongs to Jeff KØJSC, but I heard nothing, not even the change in courtesy tone. He has no idea why my node will not connect up, but it is weird because it won't even show up on the web transceiver.
Thanks Skyler KDØWHB
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
I did not restart the sshd after I changed port 222 to 22. I did reboot the computer, but Maybe that's not enough. So just run "/etc/rc3.d/S55sshd restart"? I got really confused with all of those random numbers under telemetry section, but I guess they are all frequencies for the Courtesy tone. On audacity, I just did file > export then I chose other uncompressed format and did Microsoft wav, ULAW. I also made sure the project rate was at 8000. When I get home, I will check the files, and test the telephone portal. 73 (or *72 in allstar) Skyler Kd0whb Sent from my iPhone On Apr 18, 2014, at 10:22 AM, Mark Johnston <markjohnston73@gmail.com> wrote:
SSH: I assume you restarted the sshd after changing the port or reboot the allstar box either way - /etc/rc3.d/S55sshd restart should do it.
Btw what is the trick to getting uLaw files via Audacity?
Courtesy tones, have to look under the [Telemetry] section and change the freq/numbers there - in /etc/asterisk/rpt.conf
do you have the line in rpt.conf?
<node> = radio@127.0.0.1/<node>,NONE
And the one in /etc/asterisk/iax.conf register=<node>:<secret>@register.allstarlink.org
Assuming the port 4569 is setup correctly, can you connect from the allstar dial in # from any std telephone?
"Got Root?"
How many software engineers does it take to change a light bulb? None. It's a hardware problem.
Unix is user friendly. It's just very particular about who it's friends are. WINDOWS: Will Install Needless Data On Whole System MICROSOFT: Most Intelligent Customers Realize Our Software Only Fools Teenagers.
A ntennas P oorly P laced L acks E ngineering
The best way to accelerate a computer running Windows is at 9.81 m/s².
"I get paid to support Windows, I use Linux to get work done."
On Fri, Apr 18, 2014 at 7:14 AM, Skyler F <electricity440@gmail.com> wrote:
Hello,
I am new ham in high school, and finally got a little SIMPLEX repeater up and running.
My first question
Is about SSHing into the computer remotely. I first gave it a try on my LAN, because I knew port forwarding would not be required.
First, I Changed the port 222 to port 22 on the SSHD_Config file
We are using an apple airport router, which states the LAN address of the Ethernet port is 10.0.1.1. I typed ssh root@10.0.1.1, and I got a connection refused.
I was able to reverse SSH back to my macintosh using ssh username@computersLANip from ACID, but when I tried to SSH back to acid, it would not work. Just Connection Refused.
After I login on ACID it says Root@Skylersnode, my node, and I also gave ssh root@<node number> and ssh skylersnode@local IP a try, but still no success.
Are there any suggestions on getting this to work?
Second question: Courtesy tones,
I just figured out how to create a ULAW on audacity, and mount a flash drive on the command, and I am wondering if I can change the courtesy tones or any other audio file. Like the "I OWN COMMAND" annoying thing. Where would the courtesy tones be located, and under what file name?
Third question: why it wont work on the web transceiver
When I dial in the node on the web transceiver, nothing happens, and when I hit the connect button, it does not do anything. Is there any way to get it to work, or will the web transceiver not work with my node. I would think it should work, because I have almost the same setup as Willem's node, 29571 ,on saddle back mountain.
Last Question: Won't connect to 28298 or 28299
This node is part of the FUN system here in Colorado, and I tried dialing 28298, which belongs to Jeff KØJSC, but I heard nothing, not even the change in courtesy tone. He has no idea why my node will not connect up, but it is weird because it won't even show up on the web transceiver.
Thanks Skyler KDØWHB
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
On 04/18/2014 12:06 PM, Skyler Fennell wrote:
I did not restart the sshd after I changed port 222 to 22. I did reboot the computer, but Maybe that's not enough. So just run "/etc/rc3.d/S55sshd restart"?
I got really confused with all of those random numbers under telemetry section, but I guess they are all frequencies for the Courtesy tone.
On audacity, I just did file > export then I chose other uncompressed format and did Microsoft wav, ULAW. I also made sure the project rate was at 8000.
When I get home, I will check the files, and test the telephone portal.
I know I'm late to this party, but I was outta town... First off, know that there's really only 3 courtesy tones you need to be concerned with... unlinkedct=ct2 ;Courtesy tone sound the node makes when not linked remotect=ct3 ;Courtesy tone sound the node makes when linked linkunkeyct=ct8 ;Courtesy tone sound the node makes when a remote linked system unkeys Then, further down in rpt.conf ct2=|t(0,0,10,0)(350,440,10,2048)(0,0,10,0)(350,440,10,2048)(0,0,10,0)(350,440,10,2048)(0,0,10,0)(350,440,100,2048) ct3=|t(0,0,10,0)(880,440,150,2048)(0,0,10,0)(440,660,150,2048) ct8=|t(0,0,10,0)(880,440,50,2048)(0,0,50,0)(350,440,50,2048) remotetx=|t(500,0,10,1048)(0,0,10,0)(1000,0,10,1048) remotemon=|t(1009,0,50,2048) cmdmode=|icm ;(220,247,262,294,330,350,392,2048) As far as what the numbers mean, (0.0.10.0) | | | |-------amplitude | | |-----------duration | |--------------Tone 2 |----------------Tone 1 So, with 0,0,10,0 That says No Tone1, No Tone2, 10ms duration, 0 Amplitude. (I use it for a delay. Fine tuning for how long before telemetry is sent, in conjunction with the telemdelay parameter) The numbers, like 350,440,10,2048 are 350Hz, 440Hz, 10ms delay, amplitude of 2048. When you 'remote' into a friends node (with their permission) by using *4{nodenumber} that's the time you hear the tone defined in remotetx. Hope that clears it up for you. -Geoff/W5OMR
Thank you Geoff for the help, that makes sense. Does anybody know how to have an hourly announcement with an audio file? I have heard of scripts or something, but I don't know how to script for it, where can I get started with scripting in ACID? 73 On Thu, May 1, 2014 at 4:40 PM, Geoff <ars.w5omr@gmail.com> wrote:
On 04/18/2014 12:06 PM, Skyler Fennell wrote:
I did not restart the sshd after I changed port 222 to 22. I did reboot the computer, but Maybe that's not enough. So just run "/etc/rc3.d/S55sshd restart"?
I got really confused with all of those random numbers under telemetry section, but I guess they are all frequencies for the Courtesy tone.
On audacity, I just did file > export then I chose other uncompressed format and did Microsoft wav, ULAW. I also made sure the project rate was at 8000.
When I get home, I will check the files, and test the telephone portal.
I know I'm late to this party, but I was outta town...
First off, know that there's really only 3 courtesy tones you need to be concerned with...
unlinkedct=ct2 ;Courtesy tone sound the node makes when not linked remotect=ct3 ;Courtesy tone sound the node makes when linked linkunkeyct=ct8 ;Courtesy tone sound the node makes when a remote linked system unkeys
Then, further down in rpt.conf
ct2=|t(0,0,10,0)(350,440,10,2048)(0,0,10,0)(350,440,10,2048)(0,0,10,0)(350,440,10,2048)(0,0,10,0)(350,440,100,2048) ct3=|t(0,0,10,0)(880,440,150,2048)(0,0,10,0)(440,660,150,2048) ct8=|t(0,0,10,0)(880,440,50,2048)(0,0,50,0)(350,440,50,2048) remotetx=|t(500,0,10,1048)(0,0,10,0)(1000,0,10,1048) remotemon=|t(1009,0,50,2048) cmdmode=|icm ;(220,247,262,294,330,350,392,2048)
As far as what the numbers mean, (0.0.10.0) | | | |-------amplitude | | |-----------duration | |--------------Tone 2 |----------------Tone 1
So, with 0,0,10,0 That says No Tone1, No Tone2, 10ms duration, 0 Amplitude. (I use it for a delay. Fine tuning for how long before telemetry is sent, in conjunction with the telemdelay parameter)
The numbers, like 350,440,10,2048 are 350Hz, 440Hz, 10ms delay, amplitude of 2048.
When you 'remote' into a friends node (with their permission) by using *4{nodenumber} that's the time you hear the tone defined in remotetx.
Hope that clears it up for you.
-Geoff/W5OMR
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com
One more question, sorry, I set up echolink on my node with KD0WHB-L, but then I had to port forward to the computer, and had to cancel the ports to my echolink client, which I use KD0WHB. I am running echomac, which does not have any port options. Is there a way to change the ports on ACID, which echo-link uses? 73 Skyler On Sat, May 3, 2014 at 7:01 AM, Skyler F <electricity440@gmail.com> wrote:
Thank you Geoff for the help, that makes sense.
Does anybody know how to have an hourly announcement with an audio file? I have heard of scripts or something, but I don't know how to script for it, where can I get started with scripting in ACID?
73
On Thu, May 1, 2014 at 4:40 PM, Geoff <ars.w5omr@gmail.com> wrote:
On 04/18/2014 12:06 PM, Skyler Fennell wrote:
I did not restart the sshd after I changed port 222 to 22. I did reboot the computer, but Maybe that's not enough. So just run "/etc/rc3.d/S55sshd restart"?
I got really confused with all of those random numbers under telemetry section, but I guess they are all frequencies for the Courtesy tone.
On audacity, I just did file > export then I chose other uncompressed format and did Microsoft wav, ULAW. I also made sure the project rate was at 8000.
When I get home, I will check the files, and test the telephone portal.
I know I'm late to this party, but I was outta town...
First off, know that there's really only 3 courtesy tones you need to be concerned with...
unlinkedct=ct2 ;Courtesy tone sound the node makes when not linked remotect=ct3 ;Courtesy tone sound the node makes when linked linkunkeyct=ct8 ;Courtesy tone sound the node makes when a remote linked system unkeys
Then, further down in rpt.conf
ct2=|t(0,0,10,0)(350,440,10,2048)(0,0,10,0)(350,440,10,2048)(0,0,10,0)(350,440,10,2048)(0,0,10,0)(350,440,100,2048) ct3=|t(0,0,10,0)(880,440,150,2048)(0,0,10,0)(440,660,150,2048) ct8=|t(0,0,10,0)(880,440,50,2048)(0,0,50,0)(350,440,50,2048) remotetx=|t(500,0,10,1048)(0,0,10,0)(1000,0,10,1048) remotemon=|t(1009,0,50,2048) cmdmode=|icm ;(220,247,262,294,330,350,392,2048)
As far as what the numbers mean, (0.0.10.0) | | | |-------amplitude | | |-----------duration | |--------------Tone 2 |----------------Tone 1
So, with 0,0,10,0 That says No Tone1, No Tone2, 10ms duration, 0 Amplitude. (I use it for a delay. Fine tuning for how long before telemetry is sent, in conjunction with the telemdelay parameter)
The numbers, like 350,440,10,2048 are 350Hz, 440Hz, 10ms delay, amplitude of 2048.
When you 'remote' into a friends node (with their permission) by using *4{nodenumber} that's the time you hear the tone defined in remotetx.
Hope that clears it up for you.
-Geoff/W5OMR
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com
You don’t need an audio file to announce the time as app_has a command for it. You can run it at the Asterisk CLI: *CLI> rpt cmd <yournode> status 12 0 Scripting is one of the main reasons to have a Linux based repeater controller. I’m not sure what level your Linux knowledge is so pardon me if I start at too basic of a level. Scripting is a big subject but lets see if we can get you started. First google cron. Cron runs Linux programs or scripts based on a set of time rules. This cron entry calls a script once every 3 hours between 6am and 9pm. 00 6-21/3 * * * /root/bin/time.sh The command crontab -e is how you add a cron entry. By default crontab uses the vi editor. Vi has a steep learning curve but you might as well learn it if you want to become a for real Linux guy. <esc>:wq and <esc>:q! are two vi commands you’ll want to learn right away. Google vi. Then you will need to create a script with one of the Linux editors. Newbies generally use the nano editor but it you have got this far you already have a bit of vi under your belt so keep up the good work. The script looks like this: #! /bin/bash /usr/sbin/asterisk -rx "rpt cmd <yournode> status 12 0" After you create the script you need to mark it as executable. Again google is your friend, google chmod: chmod +x /root/bin/time.sh Having said all that, you don’t have to use scripting to do a time announcement. You can do it with the app_rpt scheduler. But I’ve not used it so I’ll leave it up to others to jump in here and explain the scheduler. There are comments in rpt.conf that may be sufficient. BTW, when changing subjects best practice is to start a new thread. Tailgating leads to forever threads with no relation to the subject line. -- Tim :wq On May 3, 2014, at 6:01 AM, Skyler F <electricity440@gmail.com> wrote:
Thank you Geoff for the help, that makes sense.
Does anybody know how to have an hourly announcement with an audio file? I have heard of scripts or something, but I don't know how to script for it, where can I get started with scripting in ACID?
73
On Thu, May 1, 2014 at 4:40 PM, Geoff <ars.w5omr@gmail.com> wrote:
On 04/18/2014 12:06 PM, Skyler Fennell wrote:
I did not restart the sshd after I changed port 222 to 22. I did reboot the computer, but Maybe that's not enough. So just run "/etc/rc3.d/S55sshd restart"?
I got really confused with all of those random numbers under telemetry section, but I guess they are all frequencies for the Courtesy tone.
On audacity, I just did file > export then I chose other uncompressed format and did Microsoft wav, ULAW. I also made sure the project rate was at 8000.
When I get home, I will check the files, and test the telephone portal.
I know I'm late to this party, but I was outta town...
First off, know that there's really only 3 courtesy tones you need to be concerned with...
unlinkedct=ct2 ;Courtesy tone sound the node makes when not linked remotect=ct3 ;Courtesy tone sound the node makes when linked linkunkeyct=ct8 ;Courtesy tone sound the node makes when a remote linked system unkeys
Then, further down in rpt.conf
ct2=|t(0,0,10,0)(350,440,10,2048)(0,0,10,0)(350,440,10,2048)(0,0,10,0)(350,440,10,2048)(0,0,10,0)(350,440,100,2048) ct3=|t(0,0,10,0)(880,440,150,2048)(0,0,10,0)(440,660,150,2048) ct8=|t(0,0,10,0)(880,440,50,2048)(0,0,50,0)(350,440,50,2048) remotetx=|t(500,0,10,1048)(0,0,10,0)(1000,0,10,1048) remotemon=|t(1009,0,50,2048) cmdmode=|icm ;(220,247,262,294,330,350,392,2048)
As far as what the numbers mean, (0.0.10.0) | | | |-------amplitude | | |-----------duration | |--------------Tone 2 |----------------Tone 1
So, with 0,0,10,0 That says No Tone1, No Tone2, 10ms duration, 0 Amplitude. (I use it for a delay. Fine tuning for how long before telemetry is sent, in conjunction with the telemdelay parameter)
The numbers, like 350,440,10,2048 are 350Hz, 440Hz, 10ms delay, amplitude of 2048.
When you 'remote' into a friends node (with their permission) by using *4{nodenumber} that's the time you hear the tone defined in remotetx.
Hope that clears it up for you.
-Geoff/W5OMR
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Skyler Fennell amsatnet.info KDØWHB electricity440@gmail.com _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
On 05/03/2014 09:33 AM, Tim Sawyer wrote:
You don’t need an audio file to announce the time as app_has a command for it. You can run it at the Asterisk CLI: *CLI> rpt cmd <yournode> status 12 0
Hmmm... that doesn't work, Tim... W5OMR*CLI> rpt fun 29655 status 12 0 Usage: rpt fun <nodename> <command> Send a DTMF function to a node
Hi Jeff, It definitely works. But you use rpt cmd and not rpt fun. (Computers are literal beasts, so you really do have to type the command in exactly. Tim definitely used cmd and not fun.) -- Buddy Brannan, KB5ELV - Erie, PA Phone: (814) 860-3194 or (814) 431-0962 On May 9, 2014, at 9:15 AM, Geoff <ars.w5omr@gmail.com> wrote:
On 05/03/2014 09:33 AM, Tim Sawyer wrote:
You don’t need an audio file to announce the time as app_has a command for it. You can run it at the Asterisk CLI: *CLI> rpt cmd <yournode> status 12 0
Hmmm... that doesn't work, Tim...
W5OMR*CLI> rpt fun 29655 status 12 0 Usage: rpt fun <nodename> <command> Send a DTMF function to a node
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
On 05/03/2014 08:01 AM, Skyler F wrote:
Thank you Geoff for the help, that makes sense.
Does anybody know how to have an hourly announcement with an audio file? I have heard of scripts or something, but I don't know how to script for it, where can I get started with scripting in ACID?
Again, late to the party, but I have an answer. Hourly announcement is where I let the OS work for me. It involves using the 'cron' command in linux. (lots of references on how cron is used. Google is your friend) My cron entry is: 0 6-22 * * 1-5 /usr/sbin/asterisk -rx "rpt fun 29655 *81" What that basically says is, on the 0 minute, from 6am to 10pm, every day of the month, every day of the week, on days 1 thru 5, run the command 'asterisk -rx', which tells asterisk to connect to a running session and execute a specific command. Hope that helps. -Geoff/W5OMR
Skyler, welcome to the experience, and congrats on your repeater. sshd_config port 22 is ok To access your server just enter the IP address: 10.0.1.1 for Host. The server may display root@ etc, but that is not part of the host descriptor. I have my rpt called sounds located in /var/lib/asterisk/sounds/rpt When you call a sound from rpt.conf, just use its name, and not the extension (leave off the .ulaw) Remember, Linux is case sensitive: sound does not equal Sound It appears your third and last question are related. I suspect your node is not registering with Allstarlink.org. You have something missing or a typo in a configuration file. Check extensions.conf, iax.conf, and rpt.conf. Thanks, Bob kk6ecm _____ From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Skyler F Sent: Friday, April 18, 2014 7:14 AM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Changing Courtesy Tones,and SSHing into the computer Hello, I am new ham in high school, and finally got a little SIMPLEX repeater up and running. My first question Is about SSHing into the computer remotely. I first gave it a try on my LAN, because I knew port forwarding would not be required. First, I Changed the port 222 to port 22 on the SSHD_Config file We are using an apple airport router, which states the LAN address of the Ethernet port is 10.0.1.1. I typed ssh root@10.0.1.1, and I got a connection refused. I was able to reverse SSH back to my macintosh using ssh username@computersLANip from ACID, but when I tried to SSH back to acid, it would not work. Just Connection Refused. After I login on ACID it says Root@Skylersnode, my node, and I also gave ssh root@<node number> and ssh skylersnode@local IP a try, but still no success. Are there any suggestions on getting this to work? Second question: Courtesy tones, I just figured out how to create a ULAW on audacity, and mount a flash drive on the command, and I am wondering if I can change the courtesy tones or any other audio file. Like the "I OWN COMMAND" annoying thing. Where would the courtesy tones be located, and under what file name? Third question: why it wont work on the web transceiver When I dial in the node on the web transceiver, nothing happens, and when I hit the connect button, it does not do anything. Is there any way to get it to work, or will the web transceiver not work with my node. I would think it should work, because I have almost the same setup as Willem's node, 29571 <https://allstarlink.org/portal/webtransceiver-frameset.php?nodenum=29571> ,on saddle back mountain. Last Question: Won't connect to 28298 or 28299 This node is part of the FUN system here in Colorado, and I tried dialing 28298, which belongs to Jeff KØJSC, but I heard nothing, not even the change in courtesy tone. He has no idea why my node will not connect up, but it is weird because it won't even show up on the web transceiver. Thanks Skyler KDØWHB
An address ending in "1" (10.0.1.1) often times is the router itself. Are you sure that's the address of the Allstar box on your network? On the console local to the machine run ifconfig. Look at what it responds with for "eth0" If you're looking/pointing to the wrong address on your network, that would explain most of the problems. ----- Original Message ----- From: "Skyler F" <electricity440@gmail.com> To: "app rpt-users" <app_rpt-users@ohnosec.org> Sent: Friday, April 18, 2014 10:14:08 AM Subject: [App_rpt-users] Changing Courtesy Tones, and SSHing into the computer Hello, I am new ham in high school, and finally got a little SIMPLEX repeater up and running. My first question Is about SSHing into the computer remotely. I first gave it a try on my LAN, because I knew port forwarding would not be required. First, I Changed the port 222 to port 22 on the SSHD_Config file We are using an apple airport router, which states the LAN address of the Ethernet port is 10.0.1.1. I typed ssh root@10.0.1.1 , and I got a connection refused. I was able to reverse SSH back to my macintosh using ssh username@computersLANip from ACID, but when I tried to SSH back to acid, it would not work. Just Connection Refused. After I login on ACID it says Root@Skylersnode, my node, and I also gave ssh root@<node number> and ssh skylersnode@local IP a try, but still no success. Are there any suggestions on getting this to work? Second question: Courtesy tones, I just figured out how to create a ULAW on audacity, and mount a flash drive on the command, and I am wondering if I can change the courtesy tones or any other audio file. Like the "I OWN COMMAND" annoying thing. Where would the courtesy tones be located, and under what file name? Third question: why it wont work on the web transceiver When I dial in the node on the web transceiver, nothing happens, and when I hit the connect button, it does not do anything. Is there any way to get it to work, or will the web transceiver not work with my node. I would think it should work, because I have almost the same setup as Willem's node, 29571 ,on saddle back mountain. Last Question: Won't connect to 28298 or 28299 This node is part of the FUN system here in Colorado, and I tried dialing 28298, which belongs to Jeff KØJSC, but I heard nothing, not even the change in courtesy tone. He has no idea why my node will not connect up, but it is weird because it won't even show up on the web transceiver. Thanks Skyler KDØWHB _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (8)
-
Bob -
Buddy Brannan -
Geoff -
Mark Johnston -
Robert A. Poff WB3AWJ -
Skyler F -
Skyler Fennell
-
Tim Sawyer