[App_rpt] The wiring of the URI to a FT857D
Hello to the group, I would like to wire the URI up to my Yaesu FT857D and would like to here any comments concerning the wiring diagram posted on the FT897. Could one use the wiring diagram replacing the PCI radio interface points for the URI points? Will / W4WWM
Yes and no. For a audio and keying there will probably be no issues. For control of frequency and mode, you'll need to purchase the Yeasu CT62 RS-232 adapter cable. Please also note that we have never tested app_rpt with an FT857 so we can't tell you for certain that app_rpt will work with it or not. Steve. Will wrote:
Hello to the group,
I would like to wire the URI up to my Yaesu FT857D and would like to here any comments concerning the wiring diagram posted on the FT897. Could one use the wiring diagram replacing the PCI radio interface points for the URI points?
Will / W4WWM _______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
Steve, What radio is your hf remote???? Thouhght you were running a ft857?? Eric On Sat, Feb 23, 2008 at 10:46 AM, Stephen Rodgers < hwstar@rodgers.sdcoxmail.com> wrote:
Yes and no. For a audio and keying there will probably be no issues. For control of frequency and mode, you'll need to purchase the Yeasu CT62 RS-232 adapter cable.
Please also note that we have never tested app_rpt with an FT857 so we can't tell you for certain that app_rpt will work with it or not.
Steve.
Will wrote:
Hello to the group,
I would like to wire the URI up to my Yaesu FT857D and would like to here any comments concerning the wiring diagram posted on the FT897. Could one use the wiring diagram replacing the PCI radio interface points for the URI points?
Will / W4WWM _______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
Nope. It's an FT-897. Steve. Eric Fort wrote:
Steve, What radio is your hf remote???? Thouhght you were running a ft857??
Eric
On Sat, Feb 23, 2008 at 10:46 AM, Stephen Rodgers < hwstar@rodgers.sdcoxmail.com> wrote:
Yes and no. For a audio and keying there will probably be no issues. For control of frequency and mode, you'll need to purchase the Yeasu CT62 RS-232 adapter cable.
Please also note that we have never tested app_rpt with an FT857 so we can't tell you for certain that app_rpt will work with it or not.
Steve.
Will wrote:
Hello to the group,
I would like to wire the URI up to my Yaesu FT857D and would like to here any comments concerning the wiring diagram posted on the FT897. Could one use the wiring diagram replacing the PCI radio interface points for the URI points?
Will / W4WWM _______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
------------------------------------------------------------------------
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
ah, got it. 857 should work though as the radios are supposed to be internally identical. I believe they use the same cat command set. Eric On Sat, Feb 23, 2008 at 1:16 PM, Stephen Rodgers < hwstar@rodgers.sdcoxmail.com> wrote:
Nope. It's an FT-897.
Steve.
Eric Fort wrote:
Steve, What radio is your hf remote???? Thouhght you were running a ft857??
Eric
On Sat, Feb 23, 2008 at 10:46 AM, Stephen Rodgers < hwstar@rodgers.sdcoxmail.com> wrote:
Yes and no. For a audio and keying there will probably be no issues. For control of frequency and mode, you'll need to purchase the Yeasu CT62 RS-232 adapter cable.
Please also note that we have never tested app_rpt with an FT857 so we can't tell you for certain that app_rpt will work with it or not.
Steve.
Will wrote:
Hello to the group,
I would like to wire the URI up to my Yaesu FT857D and would like to here any comments concerning the wiring diagram posted on the FT897. Could one use the wiring diagram replacing the PCI radio interface points for the URI points?
Will / W4WWM _______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
------------------------------------------------------------------------
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
Steve, I do have the CT62. So all I would need is to make up or match the PTT, COS ,grounds RX Audio and TX Audio cable to the rig from the URI? Will
Will, Yes, that's about it. Make sure you set the usbradio.conf to use an external COS/COR as it will not be able to use squelch noise. Also you my have to tweak some of the voltage divider resistors to adjust the TX audio level. Steve. Will wrote:
Steve,
I do have the CT62. So all I would need is to make up or match the PTT, COS ,grounds RX Audio and TX Audio cable to the rig from the URI?
Will _______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
participants (3)
-
Eric Fort -
Stephen Rodgers -
Will