Thanks Buddy and Bryan, I will renumber. :) Regards, Leighton On Mon, 27 Mar 2017 at 10:24, Bryan Fields <Bryan@bryanfields.net> wrote:

On 3/26/17 7:13 PM, Leighton Judd wrote:

...

I have recently started experimenting with app_rpt.

I am wondering if there are any restrictions on numbering of private nodes?

I have set up two nodes on the same machine for a test. They are each set up as a "hub" with numbers 2222 and 3333.

Use a node starting with 1.

Nodes starting with 3 are echolink nodes.

-- Bryan Fields

727-409-1194 - Voice http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

Thanks Corey, I thought the same thing, however it doesn't work for nodes starting with 3. It seems to work for other numbering ranges, but not starting with 3. Maybe I am missing something there. Renumbering isn't a problem. It was just going to be neater if I could do it that way, that is all. I also hadn't been able to find reference to the restriction of using these numbers if creating a private linking system. 73, Leighton On Mon, 27 Mar 2017 at 10:38, Corey Dean <n3fe@repeater.net> wrote:

As long as you have the number node numbers defined with the IP address and port in rpt.conf and they have the forwarding setup correctly they should work just fine.

Corey. N3FE

Sent from my iPhone

...

On Mar 26, 2017, at 7:13 PM, Leighton Judd <leighton.judd@gmail.com> wrote:

Hi All,

I have recently started experimenting with app_rpt.

I am wondering if there are any restrictions on numbering of private nodes?

I have set up two nodes on the same machine for a test. They are each set up as a "hub" with numbers 2222 and 3333.

Using the asterisk console, I can connect successfully from node 3333 to node 2222. Trying to connect from node 2222 to node 3333 does not work. This seems to be true for node numbers, that I have tested, beginning with

...

This connects: rpt cmd 3333 ilink 3 2222

This doesn't connect: rpt cmd 2222 ilink 3 3333

Does anyone know if this is intended or not?

Regards, Leighton

_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit

http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"

...

You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

---

App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

Thanks Steve, I will do that and renumber my private nodes. I have put in the node stanzas. It was interesting that trying to connect to 3333 didn't report anything in a very verbose asterisk console. So I was a little stuck in my understanding of it. 73, Leighton On Mon, 27 Mar 2017 at 10:54, Steve Zingman <szingman@msgstor.com> wrote:

Pretty much keep your private node numbers below 2000 and you will be OK. Also make sure you have the proper entries in the nodes stanza. See: <http://docs.allstarlink.org/drupal/node/66> <http://docs.allstarlink.org/drupal/node/66>

73, Steve N4IRS

On 03/26/2017 07:44 PM, Leighton Judd wrote:

Thanks Corey,

I thought the same thing, however it doesn't work for nodes starting with 3. It seems to work for other numbering ranges, but not starting with 3.

Maybe I am missing something there.

Renumbering isn't a problem. It was just going to be neater if I could do it that way, that is all. I also hadn't been able to find reference to the restriction of using these numbers if creating a private linking system.

73, Leighton

On Mon, 27 Mar 2017 at 10:38, Corey Dean <n3fe@repeater.net> wrote:

As long as you have the number node numbers defined with the IP address and port in rpt.conf and they have the forwarding setup correctly they should work just fine.

Corey. N3FE

Sent from my iPhone

...

On Mar 26, 2017, at 7:13 PM, Leighton Judd <leighton.judd@gmail.com> wrote:

Hi All,

I have recently started experimenting with app_rpt.

I am wondering if there are any restrictions on numbering of private nodes?

I have set up two nodes on the same machine for a test. They are each set up as a "hub" with numbers 2222 and 3333.

Using the asterisk console, I can connect successfully from node 3333 to node 2222. Trying to connect from node 2222 to node 3333 does not work. This seems to be true for node numbers, that I have tested, beginning with

...

This connects: rpt cmd 3333 ilink 3 2222

This doesn't connect: rpt cmd 2222 ilink 3 3333

Does anyone know if this is intended or not?

Regards, Leighton

_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit

http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"

...

You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

---

App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________ App_rpt-users mailing listApp_rpt-users@lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.

_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.