Hello, If you have more then one server behind a NAT / Router then you need to assign different port numbers for them. Example: Server 1 Node 2000 port 4569 Node 2001 port 4569 example in rpt.conf Server 1 2000 = radio@127.0.0.1/2000,NONE 2001 = radio@127.0.0.1/2001,NONE 2003 = radio@192.168.xxx.xx2/2003,NONE 2004 = radio@192.168.xxx.xx2/2004,NONE Server 2 Node 2002 port 4570 Node 2003 port 4570 example in rpt.conf Server 2 2003 = radio@127.0.0.1/2003,NONE 2004 = radio@127.0.0.1/2004,NONE 2001 = radio@192.168.xxx.xx1,NONE 2002 = radio@192.168.xxx.xx1,NONE Now port forward 4569 to server 1 and forward 4570 to server 2. You'll need to update your server information (port number) on allstarlink.org. After you update the server. It will take up to 30 minute for the nodes to get the update. David -- Thanks, David "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson On Sun, Mar 26, 2017 at 3:12 PM, <mike@midnighteng.com> wrote:

Well Ray,

"IF" you are only testing with a node behind your NAT (router) you will need a definition to route it from each node behind the NAT.

example in rpt.conf

29261 = radio@127.0.0.1/29261,NONE ; ,y =remote base 29283 = radio@127.0.0.1/29283,NONE 29284 = radio@127.0.0.1/29284,NONE 29285 = radio@127.0.0.1/29285,NONE <<<end of all on this server 1

29999 = radio@192.168.1.223/29999,NONE <<<<<<<<<<<< on server 2<<<<<<<<<<<<

Each node behind your nat will need a address defined to be able to connect to it.

...mike/kb8jnm

----- Original Message ----- From: "Users of Asterisk app_rpt" <app_rpt-users@lists.allstarlink.org>

To: <app_rpt-users@lists.allstarlink.org> Cc:

Sent: Sun, 26 Mar 2017 17:18:46 -0400 Subject: [App_rpt-users] 2 nodes from the same ip address.

Hello,

I know I've asked this question before, I have one node for my repeater and its a full time connection to a hub and the other node is a portable node to connect to other nodes. They are both on the same Internet connection. I can connect outbound to some nodes and some not but I don't get in bound connections. My nodes are on two separate servers and have two separate ports. Is there something I'm missing? Any help is appreciated! Thank you.

73 Ray, W2RJR

_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users

To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.