John, I use a NeoWare CA22 thin terminal with a 90 degree PCI adapter. It's 12V and DIAL runs fine with the quad card. 73, Steve N4IRS On Aug 15, 2016 1:19 PM, John <wb5nfc@gmail.com> wrote: It's time to dust off my old quad PCI interface card and get it back in service. Looking for suggestions on a "smallish" footprint computer that might house the board on a 90 degree PCI adaptor to conserve space. I would prefer something that will operate from a 12 Volt supply - if that's possible... Anyone been there, done that? Suggestions? Thanks John / WB5NFC _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/ mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.