I have a 2M remote base (TM-271) running on a node here. How can I change the activity timeout? There have been several instances where I have been actively using the node and I get an activity timeout message. First it will announce timeout in 180 seconds. If I do anything like change power level, frequency, etc, it then announces activity timeout in 3597 seconds, then about 15 seconds later announces activity timeout in 3604 seconds and continues to announce activity timeout every 30 seconds or so. Disconnecting and reconnecting is the only way to stop the countdown. Thanks Jamey WR4JW
Jamey, What are your settings for: remote_inact_timeout remote_timeout 73, Steve N4IRS On 11/08/2015 10:18 PM, Jamey Wright wrote:
I have a 2M remote base (TM-271) running on a node here. How can I change the activity timeout? There have been several instances where I have been actively using the node and I get an activity timeout message. First it will announce timeout in 180 seconds. If I do anything like change power level, frequency, etc, it then announces activity timeout in 3597 seconds, then about 15 seconds later announces activity timeout in 3604 seconds and continues to announce activity timeout every 30 seconds or so. Disconnecting and reconnecting is the only way to stop the countdown.
Thanks
Jamey
WR4JW
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
In rpt.conf, Under the repeater node stanza: ;discpgm=yourdisconnectprogram ;lnkactenable=0 ;lnkacttime=1800 ;lnkactmacro=*52 ;lnkacttimerwarn=30seconds ;remote_inact_timeout=1800 ;remote_timeout=3600 nounkeyct=1 ;holdofftelem=0 Under the remote base node stanza, none of this exists. Jamey WR4JW From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Steve Zingman Sent: Monday, November 09, 2015 5:14 AM To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Remote Base Timeout Jamey, What are your settings for: remote_inact_timeout remote_timeout 73, Steve N4IRS On 11/08/2015 10:18 PM, Jamey Wright wrote: I have a 2M remote base (TM-271) running on a node here. How can I change the activity timeout? There have been several instances where I have been actively using the node and I get an activity timeout message. First it will announce timeout in 180 seconds. If I do anything like change power level, frequency, etc, it then announces activity timeout in 3597 seconds, then about 15 seconds later announces activity timeout in 3604 seconds and continues to announce activity timeout every 30 seconds or so. Disconnecting and reconnecting is the only way to stop the countdown. Thanks Jamey WR4JW _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
You want : lnkacttimerwarn=30seconds remote_inact_timeout=1800 remote_timeout=3600 In the remote base stanza. I think the values are in seconds. see <http://docs.allstarlink.org/drupal/node/117> Steve On 11/09/2015 07:56 PM, Jamey Wright wrote:
In rpt.conf, Under the repeater node stanza:
;discpgm=yourdisconnectprogram
;lnkactenable=0
;lnkacttime=1800
;lnkactmacro=*52
;lnkacttimerwarn=30seconds
;remote_inact_timeout=1800
;remote_timeout=3600
nounkeyct=1
;holdofftelem=0
Under the remote base node stanza, none of this exists.
Jamey
WR4JW
*From:*app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] *On Behalf Of *Steve Zingman *Sent:* Monday, November 09, 2015 5:14 AM *To:* app_rpt-users@ohnosec.org *Subject:* Re: [App_rpt-users] Remote Base Timeout
Jamey, What are your settings for:
remote_inact_timeout remote_timeout
73, Steve N4IRS
On 11/08/2015 10:18 PM, Jamey Wright wrote:
I have a 2M remote base (TM-271) running on a node here. How can I change the activity timeout? There have been several instances where I have been actively using the node and I get an activity timeout message. First it will announce timeout in 180 seconds. If I do anything like change power level, frequency, etc, it then announces activity timeout in 3597 seconds, then about 15 seconds later announces activity timeout in 3604 seconds and continues to announce activity timeout every 30 seconds or so. Disconnecting and reconnecting is the only way to stop the countdown.
Thanks
Jamey
WR4JW
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org>
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
Correction: You want : remote_inact_timeout= remote_timeout= remote_timeout_warning= remote_timeout_freq= In the remote base stanza. I think the values are in seconds. see <http://docs.allstarlink.org/drupal/node/117> Steve On 11/09/2015 07:56 PM, Jamey Wright wrote:
In rpt.conf, Under the repeater node stanza:
;discpgm=yourdisconnectprogram
;lnkactenable=0
;lnkacttime=1800
;lnkactmacro=*52
;lnkacttimerwarn=30seconds
;remote_inact_timeout=1800
;remote_timeout=3600
nounkeyct=1
;holdofftelem=0
Under the remote base node stanza, none of this exists.
Jamey
WR4JW
*From:*app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] *On Behalf Of *Steve Zingman *Sent:* Monday, November 09, 2015 5:14 AM *To:* app_rpt-users@ohnosec.org *Subject:* Re: [App_rpt-users] Remote Base Timeout
Jamey, What are your settings for:
remote_inact_timeout remote_timeout
73, Steve N4IRS
On 11/08/2015 10:18 PM, Jamey Wright wrote:
I have a 2M remote base (TM-271) running on a node here. How can I change the activity timeout? There have been several instances where I have been actively using the node and I get an activity timeout message. First it will announce timeout in 180 seconds. If I do anything like change power level, frequency, etc, it then announces activity timeout in 3597 seconds, then about 15 seconds later announces activity timeout in 3604 seconds and continues to announce activity timeout every 30 seconds or so. Disconnecting and reconnecting is the only way to stop the countdown.
Thanks
Jamey
WR4JW
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org>
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
I went back and checked the source to app_rpt ;remote_inact_timeout = ; Specifies the amount of time without keying from the link. Set to 0 to disable timeout. (15 * 60) ;remote_timeout = ; Session time out for remote base. Set to 0 to disable. (60 * 60) ;remote_timeout_warning_freq = ; 30 ;remote_timeout_warning = ; (3 * 60) In the remote base stanza. I think the values are in seconds. see <http://docs.allstarlink.org/drupal/node/117> Steve On 11/09/2015 07:56 PM, Jamey Wright wrote:
In rpt.conf, Under the repeater node stanza:
;discpgm=yourdisconnectprogram
;lnkactenable=0
;lnkacttime=1800
;lnkactmacro=*52
;lnkacttimerwarn=30seconds
;remote_inact_timeout=1800
;remote_timeout=3600
nounkeyct=1
;holdofftelem=0
Under the remote base node stanza, none of this exists.
Jamey
WR4JW
*From:*app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] *On Behalf Of *Steve Zingman *Sent:* Monday, November 09, 2015 5:14 AM *To:* app_rpt-users@ohnosec.org *Subject:* Re: [App_rpt-users] Remote Base Timeout
Jamey, What are your settings for:
remote_inact_timeout remote_timeout
73, Steve N4IRS
On 11/08/2015 10:18 PM, Jamey Wright wrote:
I have a 2M remote base (TM-271) running on a node here. How can I change the activity timeout? There have been several instances where I have been actively using the node and I get an activity timeout message. First it will announce timeout in 180 seconds. If I do anything like change power level, frequency, etc, it then announces activity timeout in 3597 seconds, then about 15 seconds later announces activity timeout in 3604 seconds and continues to announce activity timeout every 30 seconds or so. Disconnecting and reconnecting is the only way to stop the countdown.
Thanks
Jamey
WR4JW
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org>
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
Your example has all but one line commented out. Be sure to remove the semicolon at the start of the line for any settings you are editing. The semicolon is known as a comment mark and anything on the line after it is ignored so changing the value will have no effect. On Nov 9, 2015 4:56 PM, "Jamey Wright" <jamey.wright@charter.net> wrote:
In rpt.conf, Under the repeater node stanza:
;discpgm=yourdisconnectprogram
;lnkactenable=0
;lnkacttime=1800
;lnkactmacro=*52
;lnkacttimerwarn=30seconds
;remote_inact_timeout=1800
;remote_timeout=3600
nounkeyct=1
;holdofftelem=0
Under the remote base node stanza, none of this exists.
Jamey
WR4JW
*From:* app_rpt-users-bounces@ohnosec.org [mailto: app_rpt-users-bounces@ohnosec.org] *On Behalf Of *Steve Zingman *Sent:* Monday, November 09, 2015 5:14 AM *To:* app_rpt-users@ohnosec.org *Subject:* Re: [App_rpt-users] Remote Base Timeout
Jamey, What are your settings for:
remote_inact_timeout remote_timeout
73, Steve N4IRS
On 11/08/2015 10:18 PM, Jamey Wright wrote:
I have a 2M remote base (TM-271) running on a node here. How can I change the activity timeout? There have been several instances where I have been actively using the node and I get an activity timeout message. First it will announce timeout in 180 seconds. If I do anything like change power level, frequency, etc, it then announces activity timeout in 3597 seconds, then about 15 seconds later announces activity timeout in 3604 seconds and continues to announce activity timeout every 30 seconds or so. Disconnecting and reconnecting is the only way to stop the countdown.
Thanks
Jamey
WR4JW
_______________________________________________
App_rpt-users mailing list
App_rpt-users@ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
--
"Anything is possible if you don't know what you are talking about."
1st Law of Logic
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Added the missing lines back into the conf file. Will see how it works out. Jamey WR4JW From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Steve Passmore Sent: Monday, November 09, 2015 8:30 PM To: app_rpt mailing list <app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] Remote Base Timeout Your example has all but one line commented out. Be sure to remove the semicolon at the start of the line for any settings you are editing. The semicolon is known as a comment mark and anything on the line after it is ignored so changing the value will have no effect. On Nov 9, 2015 4:56 PM, "Jamey Wright" <jamey.wright@charter.net <mailto:jamey.wright@charter.net> > wrote: In rpt.conf, Under the repeater node stanza: ;discpgm=yourdisconnectprogram ;lnkactenable=0 ;lnkacttime=1800 ;lnkactmacro=*52 ;lnkacttimerwarn=30seconds ;remote_inact_timeout=1800 ;remote_timeout=3600 nounkeyct=1 ;holdofftelem=0 Under the remote base node stanza, none of this exists. Jamey WR4JW From: app_rpt-users-bounces@ohnosec.org <mailto:app_rpt-users-bounces@ohnosec.org> [mailto:app_rpt-users-bounces@ohnosec.org <mailto:app_rpt-users-bounces@ohnosec.org> ] On Behalf Of Steve Zingman Sent: Monday, November 09, 2015 5:14 AM To: app_rpt-users@ohnosec.org <mailto:app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] Remote Base Timeout Jamey, What are your settings for: remote_inact_timeout remote_timeout 73, Steve N4IRS On 11/08/2015 10:18 PM, Jamey Wright wrote: I have a 2M remote base (TM-271) running on a node here. How can I change the activity timeout? There have been several instances where I have been actively using the node and I get an activity timeout message. First it will announce timeout in 180 seconds. If I do anything like change power level, frequency, etc, it then announces activity timeout in 3597 seconds, then about 15 seconds later announces activity timeout in 3604 seconds and continues to announce activity timeout every 30 seconds or so. Disconnecting and reconnecting is the only way to stop the countdown. Thanks Jamey WR4JW _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (3)
-
Jamey Wright -
Steve Passmore -
Steve Zingman