Why dont you try that from the Asterisk CLI??? (do "asterisk -r" from the Linux command line) Jim Date: Mon, 19 Aug 2013 16:24:22 -0700 From: harvard5362@yahoo.com To: tim.sawyer@me.com CC: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Audio level test tone with Beagleboard xm and LOX board. Hi I made the edit to the file, however it still did not work. Here is the response I got. Perhaps I am not executing it from the correct place? root@N6LXX-1:~# rpt fun 29876 *989 -bash: rpt: command not found thank you Chris From: Tim Sawyer <tim.sawyer@me.com> To: C B <harvard5362@yahoo.com> Cc: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org> Sent: Monday, August 19, 2013 3:45 PM Subject: Re: [App_rpt-users] Audio level test tone with Beagleboard xm and LOX board. Take the semicolon off the *989 line, restart asterisk and you'll be able to make tone. --Tim:wq On Aug 19, 2013, at 1:55 PM, C B <harvard5362@yahoo.com> wrote: Hi Tried to get the test tone as per some of the instructions I have read thus far. I have looked at the rpt.conf file and it looks like it is set up to use *99 as it has the line in it *99=cop,6. The line with *989=cop,4 had a ; (semicolon) in for of it so I assume it is disabled. When I type on the CLI rpt fun 29876 *99 it does not send tone. Please tell me what I have done wrong. Thank you in advance for your help. Chris _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users