I have an irlp node that I have not used for some time, I could add it to my allstar node and how? ea8ee movil
There use to be some how-2's on the web. I suggest you read all the IRLP rules before you do anything. ...mike/kb8jnm On 12/30/2018 5:06 PM, ea8ee wrote:
I have an irlp node that I have not used for some time, I could add it to my allstar node and how?
ea8ee movil
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
last i checked, dave cameron (who has not open-sourced IRLP, since it is the basis for a commercial product he sells...) does NOT want allstar interconnected to his network, and deletes the registrations of any non-irlp gateways he becomes aware of. He asked (demanded?) that Jim delete the code that enabled it back in ‘10 or ‘11, IIRC, so, unless things have changed on his side, it is not officially supported, and you are on your own (regardless of what other forked versions of allstar are doing). If you want the official answer, I’d suggest you contact the owner of the IRLP code for his take on interconnecting IRLP to other linking networks. -- Bryan Sent from my iPhone 6S...No electrons were harmed in the sending of this message.
On Dec 30, 2018, at 18:43, Mike <mm@midnighteng.com> wrote:
There use to be some how-2's on the web.
I suggest you read all the IRLP rules before you do anything.
...mike/kb8jnm
On 12/30/2018 5:06 PM, ea8ee wrote: I have an irlp node that I have not used for some time, I could add it to my allstar node and how?
ea8ee movil
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Just read the rules and see if it applies to your use. http://www.irlp.net/guideline-FAQ.html ...mike/kb8jnm On 12/30/2018 7:04 PM, Bryan D. Boyle wrote:
last i checked, dave cameron (who has not open-sourced IRLP, since it is the basis for a commercial product he sells...) does NOT want allstar interconnected to his network, and deletes the registrations of any non-irlp gateways he becomes aware of.
He asked (demanded?) that Jim delete the code that enabled it back in ‘10 or ‘11, IIRC, so, unless things have changed on his side, it is not officially supported, and you are on your own (regardless of what other forked versions of allstar are doing).
If you want the official answer, I’d suggest you contact the owner of the IRLP code for his take on interconnecting IRLP to other linking networks.
-- Bryan Sent from my iPhone 6S...No electrons were harmed in the sending of this message.
On Dec 30, 2018, at 18:43, Mike <mm@midnighteng.com <mailto:mm@midnighteng.com>> wrote:
There use to be some how-2's on the web.
I suggest you read all the IRLP rules before you do anything.
...mike/kb8jnm
On 12/30/2018 5:06 PM, ea8ee wrote:
I have an irlp node that I have not used for some time, I could add it to my allstar node and how?
ea8ee movil
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
It would not be an interconnection of systems but using irlp from the same node allstar I think it is necessary to buy the rights of use that my case already paid when I acquired my irlp node ea8ee movil El lun., 31 dic. 2018 0:04, Bryan D. Boyle <bdboyle@bdboyle.com> escribió:
last i checked, dave cameron (who has not open-sourced IRLP, since it is the basis for a commercial product he sells...) does NOT want allstar interconnected to his network, and deletes the registrations of any non-irlp gateways he becomes aware of.
He asked (demanded?) that Jim delete the code that enabled it back in ‘10 or ‘11, IIRC, so, unless things have changed on his side, it is not officially supported, and you are on your own (regardless of what other forked versions of allstar are doing).
If you want the official answer, I’d suggest you contact the owner of the IRLP code for his take on interconnecting IRLP to other linking networks.
-- Bryan Sent from my iPhone 6S...No electrons were harmed in the sending of this message.
On Dec 30, 2018, at 18:43, Mike <mm@midnighteng.com> wrote:
There use to be some how-2's on the web.
I suggest you read all the IRLP rules before you do anything.
...mike/kb8jnm
On 12/30/2018 5:06 PM, ea8ee wrote:
I have an irlp node that I have not used for some time, I could add it to my allstar node and how?
ea8ee movil
_______________________________________________ App_rpt-users mailing listApp_rpt-users@lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
The last time I helped an IRLP user setup his node, there came a point in the setup procedure where I had to provide the help desk access to the node (RPi with their software load), so they could install security codes required for it to work with the IRLP network. Thanks, Bob K6ECM Sent from iPad
On Dec 30, 2018, at 11:35 PM, ea8ee <ea8ee1@gmail.com> wrote:
It would not be an interconnection of systems but using irlp from the same node allstar I think it is necessary to buy the rights of use that my case already paid when I acquired my irlp node
ea8ee movil
El lun., 31 dic. 2018 0:04, Bryan D. Boyle <bdboyle@bdboyle.com> escribió:
last i checked, dave cameron (who has not open-sourced IRLP, since it is the basis for a commercial product he sells...) does NOT want allstar interconnected to his network, and deletes the registrations of any non-irlp gateways he becomes aware of.
He asked (demanded?) that Jim delete the code that enabled it back in ‘10 or ‘11, IIRC, so, unless things have changed on his side, it is not officially supported, and you are on your own (regardless of what other forked versions of allstar are doing).
If you want the official answer, I’d suggest you contact the owner of the IRLP code for his take on interconnecting IRLP to other linking networks.
-- Bryan Sent from my iPhone 6S...No electrons were harmed in the sending of this message.
On Dec 30, 2018, at 18:43, Mike <mm@midnighteng.com> wrote:
There use to be some how-2's on the web.
I suggest you read all the IRLP rules before you do anything.
...mike/kb8jnm
On 12/30/2018 5:06 PM, ea8ee wrote: I have an irlp node that I have not used for some time, I could add it to my allstar node and how?
ea8ee movil
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
I am fairly sure you can run both nodes types on the same server. I had looked at it 5 years ago. But remember much less now to give you any guidance. Perhaps talk with those that have built a irlp bridge for the best help. ...mike/kb8jnm On 12/31/2018 2:35 AM, ea8ee wrote:
It would not be an interconnection of systems but using irlp from the same node allstar I think it is necessary to buy the rights of use that my case already paid when I acquired my irlp node
ea8ee movil
El lun., 31 dic. 2018 0:04, Bryan D. Boyle <bdboyle@bdboyle.com <mailto:bdboyle@bdboyle.com>> escribió:
last i checked, dave cameron (who has not open-sourced IRLP, since it is the basis for a commercial product he sells...) does NOT want allstar interconnected to his network, and deletes the registrations of any non-irlp gateways he becomes aware of.
He asked (demanded?) that Jim delete the code that enabled it back in ‘10 or ‘11, IIRC, so, unless things have changed on his side, it is not officially supported, and you are on your own (regardless of what other forked versions of allstar are doing).
If you want the official answer, I’d suggest you contact the owner of the IRLP code for his take on interconnecting IRLP to other linking networks.
-- Bryan Sent from my iPhone 6S...No electrons were harmed in the sending of this message.
On Dec 30, 2018, at 18:43, Mike <mm@midnighteng.com <mailto:mm@midnighteng.com>> wrote:
There use to be some how-2's on the web.
I suggest you read all the IRLP rules before you do anything.
...mike/kb8jnm
On 12/30/2018 5:06 PM, ea8ee wrote:
I have an irlp node that I have not used for some time, I could add it to my allstar node and how?
ea8ee movil
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (4)
-
Bob Pyke -
Bryan D. Boyle -
ea8ee -
Mike