Hello Rodger.  I had the same problem with the WX and had to poke around all files in supermon until I resolved the problem. All you have to do is edit the global.inc file.  The last lines say: // Show weather conditions and temperature for Zip code area $LOCALZIP = "SKMD"; Mine is SKMD, which corresponds to my nearest airpot.  Find the airport abreviation for your nearest one, save the file and restart from the browser.  You should now have the correct WX info. 73 de Guillermo - HK4KM Message: 1 Date: Wed, 06 Mar 2019 11:42:15 +1300 From: Rodger Hanson <rodger_hanson@slingshot.co.nz> To: app_rpt-users@lists.allstarlink.org Subject: [App_rpt-users] Supermon Weather Settings Message-ID: <375054ef34d555249e9bb36e7822d2cd@slingshot.co.nz> Content-Type: text/plain; charset=US-ASCII; format=flowed Hello All I have my AllStar up and running, setup supermon, and found that the weather settings seem to be limited to USA, which perhaps is a bit short sighted since there are people all over using Allstar & supermon. Is there a way to put in my weather "zip code" for Auckland, New Zealand? I just could find any document about setting up outside the USA. Any help with this would be appreciated. Otherwise, the Allstar from Hamvoip works well, after sorting out my power problem. Thanks guys for the great work. -- Kind Regards, Rodger Hanson Tel: +64 9 278-8683 Mob: +64 27 5687659   Email: rodger_hanson@slingshot.co.nz   Web: https://zl1rah.blogspot.co.nz/ _Please consider the environment before printing this email_ ------------------------------ Message: 2 Date: Wed, 6 Mar 2019 00:58:02 +0000 From: Jim Nessen <nessenj@jimsoffice.org> To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] Supermon Weather Settings Message-ID:     <MWHPR1301MB2126EA56DB227670EA97BCE8D9730@MWHPR1301MB2126.namprd13.prod.outlook.com>     Content-Type: text/plain; charset="us-ascii" Your question is probably better suited for the official hamvoip mailing list You can subscribe by visiting  http://lists.hamvoip.org/cgi-bin/mailman/listinfo/arm-allstar Jim, K6JWN -----Original Message----- From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Rodger Hanson Sent: Tuesday, March 5, 2019 2:42 PM To: app_rpt-users@lists.allstarlink.org Subject: [App_rpt-users] Supermon Weather Settings Hello All I have my AllStar up and running, setup supermon, and found that the weather settings seem to be limited to USA, which perhaps is a bit short sighted since there are people all over using Allstar & supermon. Is there a way to put in my weather "zip code" for Auckland, New Zealand? I just could find any document about setting up outside the USA. Any help with this would be appreciated. Otherwise, the Allstar from Hamvoip works well, after sorting out my power problem. Thanks guys for the great work. -- Kind Regards, Rodger Hanson Tel: +64 9 278-8683 Mob: +64 27 5687659   Email: rodger_hanson@slingshot.co.nz   Web: https://zl1rah.blogspot.co.nz/ _Please consider the environment before printing this email_ _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. ------------------------------ Message: 3 Date: Wed, 6 Mar 2019 00:32:57 -0600 From: "David Wilcox" <wilcoxdl@charter.net> To: <App_rpt-users@lists.allstarlink.org> Subject: [App_rpt-users] Link Question Message-ID: <000001d4d3e6$707d5db0$51781910$@charter.net> Content-Type: text/plain; charset="us-ascii" Help Please I'm using a handset radio to control a remote repeater the problem I'm having is when the handset releases it hears the output from the repeater and goes in to Transmit release and transmit cycle that won't stop, is there a setting in the rpt.conf that would cure this Thanks for any help Dave Kd9bvf