I'm at a loss. I upgraded my Dial system to the new All Star Link 1.0 and am have a few issues. When I try and run radio-tune-menu I get root@N2YP_Rogers_Knob:~# radio-tune-menu Error parsing device parameters I've read through past messages and checked that chan_usbradio was the active one in modules and that simple USB was set for no load. Also as of right now my nodes load with the URI's and sort of function as they are. Even when no radios are hooked up they lockup in "transmit" mode. I've tried rebooting the system and any other suggestions I could find with no luck. I've tried with both new and old conf files with no success. John Rudolph Amateur Radio Op N2YP Unadilla,NY
In my case, it was a permissions issue. User 'repeater' is supposed to have sudo (sudo -l) rights, but every time I tried to enter a command on ASL 1.01, it had to be proceeded with 'sudo'. Try 'sudo radio-tune-menu' and see what happens. 73 W5OMR On Wed, Mar 28, 2018, 00:29 John Rudolph- N2YP <John@n2yp.com> wrote:
I'm at a loss. I upgraded my Dial system to the new All Star Link 1.0 and am have a few issues. When I try and run radio-tune-menu I get
root@N2YP_Rogers_Knob:~# radio-tune-menu Error parsing device parameters
I've read through past messages and checked that chan_usbradio was the active one in modules and that simple USB was set for no load. Also as of right now my nodes load with the URI's and sort of function as they are. Even when no radios are hooked up they lockup in "transmit" mode. I've tried rebooting the system and any other suggestions I could find with no luck. I've tried with both new and old conf files with no success. John Rudolph Amateur Radio Op N2YP Unadilla,NY _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Geoff, You have it correct. If you try to run radio-tune menu as user repeater, you do get the error. Running it with sudo radio-tune-menu works. The user repeater does have sudo privileges, which allow you to run a command with elevated rights. If you do not want to have to type sudo, you can either run sudo -s or set the root password (which is NOT set by default) and then use su. 73, Steve N4IRS On 3/28/2018 8:00 AM, ARS W5OMR wrote:
In my case, it was a permissions issue. User 'repeater' is supposed to have sudo (sudo -l) rights, but every time I tried to enter a command on ASL 1.01, it had to be proceeded with 'sudo'.
Try 'sudo radio-tune-menu' and see what happens.
73 W5OMR
On Wed, Mar 28, 2018, 00:29 John Rudolph- N2YP <John@n2yp.com <mailto:John@n2yp.com>> wrote:
I'm at a loss. I upgraded my Dial system to the new All Star Link 1.0 and am have a few issues. When I try and run radio-tune-menu I get
root@N2YP_Rogers_Knob:~# radio-tune-menu Error parsing device parameters
I've read through past messages and checked that chan_usbradio was the active one in modules and that simple USB was set for no load. Also as of right now my nodes load with the URI's and sort of function as they are. Even when no radios are hooked up they lockup in "transmit" mode. I've tried rebooting the system and any other suggestions I could find with no luck. I've tried with both new and old conf files with no success. John Rudolph Amateur Radio Op N2YP Unadilla,NY _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
I suppose I was confused by the term 'sudo privleges' thinking that the user didn't have to precede every command because they had sudo rights. That's something about Debian I never understood. Stretch is Debian based, no? On Wed, Mar 28, 2018, 07:24 Steve Zingman <szingman@msgstor.com> wrote:
Geoff, You have it correct. If you try to run radio-tune menu as user repeater, you do get the error. Running it with sudo radio-tune-menu works. The user repeater does have sudo privileges, which allow you to run a command with elevated rights. If you do not want to have to type sudo, you can either run sudo -s or set the root password (which is NOT set by default) and then use su.
73, Steve N4IRS
On 3/28/2018 8:00 AM, ARS W5OMR wrote:
In my case, it was a permissions issue. User 'repeater' is supposed to have sudo (sudo -l) rights, but every time I tried to enter a command on ASL 1.01, it had to be proceeded with 'sudo'.
Try 'sudo radio-tune-menu' and see what happens.
73 W5OMR
On Wed, Mar 28, 2018, 00:29 John Rudolph- N2YP <John@n2yp.com> wrote:
I'm at a loss. I upgraded my Dial system to the new All Star Link 1.0 and am have a few issues. When I try and run radio-tune-menu I get
root@N2YP_Rogers_Knob:~# radio-tune-menu Error parsing device parameters
I've read through past messages and checked that chan_usbradio was the active one in modules and that simple USB was set for no load. Also as of right now my nodes load with the URI's and sort of function as they are. Even when no radios are hooked up they lockup in "transmit" mode. I've tried rebooting the system and any other suggestions I could find with no luck. I've tried with both new and old conf files with no success. John Rudolph Amateur Radio Op N2YP Unadilla,NY _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing listApp_rpt-users@lists.allstarlink.orghttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Stretch is the Debian "codename" for Debian version 9. All of the AllStarLink Asterisk images are built on Debian 9. In the case of the Raspberry Pi, that is Raspbian Stretch. In the case of the x86/AMD that is Debian Stretch (9) 73, Steve N4IRS On 3/28/2018 8:33 AM, ARS W5OMR wrote:
I suppose I was confused by the term 'sudo privleges' thinking that the user didn't have to precede every command because they had sudo rights. That's something about Debian I never understood. Stretch is Debian based, no?
On Wed, Mar 28, 2018, 07:24 Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
Geoff, You have it correct. If you try to run radio-tune menu as user repeater, you do get the error. Running it with sudo radio-tune-menu works. The user repeater does have sudo privileges, which allow you to run a command with elevated rights. If you do not want to have to type sudo, you can either run sudo -s or set the root password (which is NOT set by default) and then use su.
73, Steve N4IRS
On 3/28/2018 8:00 AM, ARS W5OMR wrote:
In my case, it was a permissions issue. User 'repeater' is supposed to have sudo (sudo -l) rights, but every time I tried to enter a command on ASL 1.01, it had to be proceeded with 'sudo'.
Try 'sudo radio-tune-menu' and see what happens.
73 W5OMR
On Wed, Mar 28, 2018, 00:29 John Rudolph- N2YP <John@n2yp.com <mailto:John@n2yp.com>> wrote:
I'm at a loss. I upgraded my Dial system to the new All Star Link 1.0 and am have a few issues. When I try and run radio-tune-menu I get
root@N2YP_Rogers_Knob:~# radio-tune-menu Error parsing device parameters
I've read through past messages and checked that chan_usbradio was the active one in modules and that simple USB was set for no load. Also as of right now my nodes load with the URI's and sort of function as they are. Even when no radios are hooked up they lockup in "transmit" mode. I've tried rebooting the system and any other suggestions I could find with no luck. I've tried with both new and old conf files with no success. John Rudolph Amateur Radio Op N2YP Unadilla,NY _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (3)
-
ARS W5OMR -
John Rudolph- N2YP -
Steve Zingman