Receive Adjustment Failed
Any idea guys? I tried rxboost=1 and rxboots=0 and same results. I know there is audio at the receive input because I have good quality repeater audio. But have a long squelch burst on dekay of the subscriber. This is a modified CM108 USB fob. Thanks for all the great help! 73 Jim W7RY Please enter your selection now: 2 tune rxnoise maxtries=12, target=27000, tolerance=2750 tries=0, setting=2, meas=32767 tries=1, setting=2, meas=32767 tries=2, setting=2, meas=32767 tries=3, setting=2, meas=32767 tries=4, setting=1, meas=32767 tries=5, setting=1, meas=32767 tries=6, setting=1, meas=32767 tries=7, setting=1, meas=32767 tries=8, setting=1, meas=32767 tries=9, setting=1, meas=32767 tries=10, setting=1, meas=32767 tries=11, setting=1, meas=32767 DONE tries=12, setting=63, meas=32767, sqnoise=13206 ERROR: RX INPUT ADJUST FAILED.
Also, what is the parameter for? rxnoisefiltype=0 I don’t see it anywhere in the documentation. Thanks again! 73 Jim W7RY From: Jim W7RY Sent: Friday, November 16, 2012 8:29 PM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Receive Adjustment Failed Any idea guys? I tried rxboost=1 and rxboots=0 and same results. I know there is audio at the receive input because I have good quality repeater audio. But have a long squelch burst on dekay of the subscriber. This is a modified CM108 USB fob. Thanks for all the great help! 73 Jim W7RY Please enter your selection now: 2 tune rxnoise maxtries=12, target=27000, tolerance=2750 tries=0, setting=2, meas=32767 tries=1, setting=2, meas=32767 tries=2, setting=2, meas=32767 tries=3, setting=2, meas=32767 tries=4, setting=1, meas=32767 tries=5, setting=1, meas=32767 tries=6, setting=1, meas=32767 tries=7, setting=1, meas=32767 tries=8, setting=1, meas=32767 tries=9, setting=1, meas=32767 tries=10, setting=1, meas=32767 tries=11, setting=1, meas=32767 DONE tries=12, setting=63, meas=32767, sqnoise=13206 ERROR: RX INPUT ADJUST FAILED. -------------------------------------------------------------------------------- _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Well I made some progress.... Found a different place to pick off discriminator audio. I’m using Tate equipment and this is my first time working with it. The info that I have is lacking. Guess I need to get in touch with some of me mates down-under to set me straight! Anyway, I think it got it where I need if for now. Thanks 73 Jim W7RY From: Jim W7RY Sent: Friday, November 16, 2012 8:29 PM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Receive Adjustment Failed Any idea guys? I tried rxboost=1 and rxboots=0 and same results. I know there is audio at the receive input because I have good quality repeater audio. But have a long squelch burst on dekay of the subscriber. This is a modified CM108 USB fob. Thanks for all the great help! 73 Jim W7RY Please enter your selection now: 2 tune rxnoise maxtries=12, target=27000, tolerance=2750 tries=0, setting=2, meas=32767 tries=1, setting=2, meas=32767 tries=2, setting=2, meas=32767 tries=3, setting=2, meas=32767 tries=4, setting=1, meas=32767 tries=5, setting=1, meas=32767 tries=6, setting=1, meas=32767 tries=7, setting=1, meas=32767 tries=8, setting=1, meas=32767 tries=9, setting=1, meas=32767 tries=10, setting=1, meas=32767 tries=11, setting=1, meas=32767 DONE tries=12, setting=63, meas=32767, sqnoise=13206 ERROR: RX INPUT ADJUST FAILED. -------------------------------------------------------------------------------- _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
I use a 10k pot between the discriminator audio and the fob input so I can adjust the level. Works every time. Corey N3FE On Nov 17, 2012, at 12:47 AM, "Jim W7RY" <w7ry@centurytel.net<mailto:w7ry@centurytel.net>> wrote: Well I made some progress.... Found a different place to pick off discriminator audio. I’m using Tate equipment and this is my first time working with it. The info that I have is lacking. Guess I need to get in touch with some of me mates down-under to set me straight! Anyway, I think it got it where I need if for now. Thanks 73 Jim W7RY From: Jim W7RY<mailto:w7ry@centurytel.net> Sent: Friday, November 16, 2012 8:29 PM To: app_rpt-users@ohnosec.org<mailto:app_rpt-users@ohnosec.org> Subject: [App_rpt-users] Receive Adjustment Failed Any idea guys? I tried rxboost=1 and rxboots=0 and same results. I know there is audio at the receive input because I have good quality repeater audio. But have a long squelch burst on dekay of the subscriber. This is a modified CM108 USB fob. Thanks for all the great help! 73 Jim W7RY Please enter your selection now: 2 tune rxnoise maxtries=12, target=27000, tolerance=2750 tries=0, setting=2, meas=32767 tries=1, setting=2, meas=32767 tries=2, setting=2, meas=32767 tries=3, setting=2, meas=32767 tries=4, setting=1, meas=32767 tries=5, setting=1, meas=32767 tries=6, setting=1, meas=32767 tries=7, setting=1, meas=32767 tries=8, setting=1, meas=32767 tries=9, setting=1, meas=32767 tries=10, setting=1, meas=32767 tries=11, setting=1, meas=32767 DONE tries=12, setting=63, meas=32767, sqnoise=13206 ERROR: RX INPUT ADJUST FAILED. ________________________________ _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -- This message was scanned and is believed to be clean. Click here to report this message as spam.<http://simba.repeater.net:8080/cgi-bin/learn-msg.cgi?id=F167D221F.A7B40> _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (2)
-
Corey Dean -
Jim W7RY