Yes its been some time since I’ve monitored the emails because I’ve had way too many to try to read through them but…. I have a question to probably a common problem and easy fix. I am using the Dial distro of allstar which has been working great up to some point. So today I decided to fire up the old HT and dial up a node for some traffic to listen to. Connection failed is what I’m getting. No matter what node I try to dial up I get, Connection failed. All of my config files look ok and I have not done any changes to either my allstar node or my port forwarding on my router. Where might I start to find and resolve my issue. Thanks gang Harold K7ILO Node 27863
start with the DTMF. listen to the readback of the failed connect. or Watch the console output but before you make any changes to the system, reboot it. If nothing has changed with your config than adjusting something is the wrong solution. The chances of something having gone wrong in memory is a bit higher in a rf environment and a reboot often will flush that out. If it does, you need to look at bad memory and/or rf getting on your wiring. But other possibilities exist. ...mike/kb8jnm On 5/6/2018 3:06 PM, k7ilo1@gmail.com wrote:
Yes its been some time since I’ve monitored the emails because I’ve had way too many to try to read through them but….
I have a question to probably a common problem and easy fix.
I am using the Dial distro of allstar which has been working great up to some point.
So today I decided to fire up the old HT and dial up a node for some traffic to listen to.
Connection failed is what I’m getting.
No matter what node I try to dial up I get, Connection failed.
All of my config files look ok and I have not done any changes to either my allstar node or my port forwarding on my router.
Where might I start to find and resolve my issue.
Thanks gang
Harold
K7ILO
Node 27863
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Giving this some more thought... (what was I thinking... or not) I guess I skipped over the fact you may not have a internet connection at all. Probably the first check anyway. Try something from a command line first to check it. Reboot router/computer and check again / check dns at node. ...mike/kb8jnm On 5/7/2018 11:27 AM, Mike wrote:
start with the DTMF.
listen to the readback of the failed connect. or Watch the console output
but before you make any changes to the system, reboot it.
If nothing has changed with your config than adjusting something is the wrong solution.
The chances of something having gone wrong in memory is a bit higher in a rf environment and a reboot often will flush that out. If it does, you need to look at bad memory and/or rf getting on your wiring.
But other possibilities exist.
...mike/kb8jnm
On 5/6/2018 3:06 PM, k7ilo1@gmail.com wrote:
Yes its been some time since I’ve monitored the emails because I’ve had way too many to try to read through them but….
I have a question to probably a common problem and easy fix.
I am using the Dial distro of allstar which has been working great up to some point.
So today I decided to fire up the old HT and dial up a node for some traffic to listen to.
Connection failed is what I’m getting.
No matter what node I try to dial up I get, Connection failed.
All of my config files look ok and I have not done any changes to either my allstar node or my port forwarding on my router.
Where might I start to find and resolve my issue.
Thanks gang
Harold
K7ILO
Node 27863
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Sorry gang for not getting back sooner but what I did find is that I could not ping anything except for local ip address’s with my router as the dns server So I changed it to Google’s quad 8’s and I was able to ping things on the internet but was still not able to connect to anything. But today, I decided just to check because sometimes it takes time for dns records to populate and low-and-behold, I was able to connect to nodes now. What was funny is, after the online nodes portal was re-instated, I was showing in the online nodes list but couldn’t go anywhere. Oh well, its working now. Thanks all Harold K7ILO Node: 27863 From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Monday, May 7, 2018 10:05 AM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] Failed Connections Giving this some more thought... (what was I thinking... or not) I guess I skipped over the fact you may not have a internet connection at all. Probably the first check anyway. Try something from a command line first to check it. Reboot router/computer and check again / check dns at node. ...mike/kb8jnm On 5/7/2018 11:27 AM, Mike wrote: start with the DTMF. listen to the readback of the failed connect. or Watch the console output but before you make any changes to the system, reboot it. If nothing has changed with your config than adjusting something is the wrong solution. The chances of something having gone wrong in memory is a bit higher in a rf environment and a reboot often will flush that out. If it does, you need to look at bad memory and/or rf getting on your wiring. But other possibilities exist. ...mike/kb8jnm On 5/6/2018 3:06 PM, k7ilo1@gmail.com <mailto:k7ilo1@gmail.com> wrote: Yes its been some time since I’ve monitored the emails because I’ve had way too many to try to read through them but…. I have a question to probably a common problem and easy fix. I am using the Dial distro of allstar which has been working great up to some point. So today I decided to fire up the old HT and dial up a node for some traffic to listen to. Connection failed is what I’m getting. No matter what node I try to dial up I get, Connection failed. All of my config files look ok and I have not done any changes to either my allstar node or my port forwarding on my router. Where might I start to find and resolve my issue. Thanks gang Harold K7ILO Node 27863 _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Well, I know that some of you that have problems with dns get around them by using google dns BUT... I think you need to take a good look at your network config in your server and perhaps router. But I think your server will be your likely target. But it could be both. In short I would say verify your router first and scub-out your server 'net config' very well. If everything is right, it should work right away after a reboot, at least for outbound connects.. But I'm glad to hear it's working for you. ...mike/kb8jnm On 5/12/2018 12:45 PM, k7ilo1@gmail.com wrote:
Sorry gang for not getting back sooner but what I did find is that I could not ping anything except for local ip address’s with my router as the dns server
So I changed it to Google’s quad 8’s and I was able to ping things on the internet but was still not able to connect to anything.
But today, I decided just to check because sometimes it takes time for dns records to populate and low-and-behold, I was able to connect to nodes now.
What was funny is, after the online nodes portal was re-instated, I was showing in the online nodes list but couldn’t go anywhere.
Oh well, its working now.
Thanks all
Harold
K7ILO
Node: 27863
*From:*App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> *On Behalf Of *Mike *Sent:* Monday, May 7, 2018 10:05 AM *To:* app_rpt-users@lists.allstarlink.org *Subject:* Re: [App_rpt-users] Failed Connections
Giving this some more thought... (what was I thinking... or not)
I guess I skipped over the fact you may not have a internet connection at all.
Probably the first check anyway. Try something from a command line first to check it.
Reboot router/computer and check again / check dns at node.
...mike/kb8jnm
On 5/7/2018 11:27 AM, Mike wrote:
start with the DTMF.
listen to the readback of the failed connect. or Watch the console output
but before you make any changes to the system, reboot it.
If nothing has changed with your config than adjusting something is the wrong solution.
The chances of something having gone wrong in memory is a bit higher in a rf environment and a reboot often will flush that out. If it does, you need to look at bad memory and/or rf getting on your wiring.
But other possibilities exist.
...mike/kb8jnm
On 5/6/2018 3:06 PM, k7ilo1@gmail.com <mailto:k7ilo1@gmail.com> wrote:
Yes its been some time since I’ve monitored the emails because I’ve had way too many to try to read through them but….
I have a question to probably a common problem and easy fix.
I am using the Dial distro of allstar which has been working great up to some point.
So today I decided to fire up the old HT and dial up a node for some traffic to listen to.
Connection failed is what I’m getting.
No matter what node I try to dial up I get, Connection failed.
All of my config files look ok and I have not done any changes to either my allstar node or my port forwarding on my router.
Where might I start to find and resolve my issue.
Thanks gang
Harold
K7ILO
Node 27863
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org>
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________
App_rpt-users mailing list
App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org>
http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button"
You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Yeah I thought about that also. It probably has already cleared so I will put my dns info in the server back to my router and see what happens. Harold From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Saturday, May 12, 2018 10:03 AM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] Failed Connections Well, I know that some of you that have problems with dns get around them by using google dns BUT... I think you need to take a good look at your network config in your server and perhaps router. But I think your server will be your likely target. But it could be both. In short I would say verify your router first and scub-out your server 'net config' very well. If everything is right, it should work right away after a reboot, at least for outbound connects.. But I'm glad to hear it's working for you. ...mike/kb8jnm On 5/12/2018 12:45 PM, k7ilo1@gmail.com <mailto:k7ilo1@gmail.com> wrote: Sorry gang for not getting back sooner but what I did find is that I could not ping anything except for local ip address’s with my router as the dns server So I changed it to Google’s quad 8’s and I was able to ping things on the internet but was still not able to connect to anything. But today, I decided just to check because sometimes it takes time for dns records to populate and low-and-behold, I was able to connect to nodes now. What was funny is, after the online nodes portal was re-instated, I was showing in the online nodes list but couldn’t go anywhere. Oh well, its working now. Thanks all Harold K7ILO Node: 27863 From: App_rpt-users <mailto:app_rpt-users-bounces@lists.allstarlink.org> <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Monday, May 7, 2018 10:05 AM To: app_rpt-users@lists.allstarlink.org <mailto:app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] Failed Connections Giving this some more thought... (what was I thinking... or not) I guess I skipped over the fact you may not have a internet connection at all. Probably the first check anyway. Try something from a command line first to check it. Reboot router/computer and check again / check dns at node. ...mike/kb8jnm On 5/7/2018 11:27 AM, Mike wrote: start with the DTMF. listen to the readback of the failed connect. or Watch the console output but before you make any changes to the system, reboot it. If nothing has changed with your config than adjusting something is the wrong solution. The chances of something having gone wrong in memory is a bit higher in a rf environment and a reboot often will flush that out. If it does, you need to look at bad memory and/or rf getting on your wiring. But other possibilities exist. ...mike/kb8jnm On 5/6/2018 3:06 PM, k7ilo1@gmail.com <mailto:k7ilo1@gmail.com> wrote: Yes its been some time since I’ve monitored the emails because I’ve had way too many to try to read through them but…. I have a question to probably a common problem and easy fix. I am using the Dial distro of allstar which has been working great up to some point. So today I decided to fire up the old HT and dial up a node for some traffic to listen to. Connection failed is what I’m getting. No matter what node I try to dial up I get, Connection failed. All of my config files look ok and I have not done any changes to either my allstar node or my port forwarding on my router. Where might I start to find and resolve my issue. Thanks gang Harold K7ILO Node 27863 _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Well you were right Mike, about possibly an issue with the router. It has a dns relay function that was turned off. I forgot that I had reset my router about a month ago and that function is default off. My allstar server has a static ip so that’s why it wouldn’t resolve anything past the router itself. Almost everything in my house uses the dhcp function so that’s why I didn’t see the issue because dhcp tells the computers everything they need to know. Thanks for all of the suggestions. I am now back to my routers ip address in my resolv.conf file. 73 all Harold K7ILO Node 27863 From: App_rpt-users <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Saturday, May 12, 2018 10:03 AM To: app_rpt-users@lists.allstarlink.org Subject: Re: [App_rpt-users] Failed Connections Well, I know that some of you that have problems with dns get around them by using google dns BUT... I think you need to take a good look at your network config in your server and perhaps router. But I think your server will be your likely target. But it could be both. In short I would say verify your router first and scub-out your server 'net config' very well. If everything is right, it should work right away after a reboot, at least for outbound connects.. But I'm glad to hear it's working for you. ...mike/kb8jnm On 5/12/2018 12:45 PM, k7ilo1@gmail.com <mailto:k7ilo1@gmail.com> wrote: Sorry gang for not getting back sooner but what I did find is that I could not ping anything except for local ip address’s with my router as the dns server So I changed it to Google’s quad 8’s and I was able to ping things on the internet but was still not able to connect to anything. But today, I decided just to check because sometimes it takes time for dns records to populate and low-and-behold, I was able to connect to nodes now. What was funny is, after the online nodes portal was re-instated, I was showing in the online nodes list but couldn’t go anywhere. Oh well, its working now. Thanks all Harold K7ILO Node: 27863 From: App_rpt-users <mailto:app_rpt-users-bounces@lists.allstarlink.org> <app_rpt-users-bounces@lists.allstarlink.org> On Behalf Of Mike Sent: Monday, May 7, 2018 10:05 AM To: app_rpt-users@lists.allstarlink.org <mailto:app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] Failed Connections Giving this some more thought... (what was I thinking... or not) I guess I skipped over the fact you may not have a internet connection at all. Probably the first check anyway. Try something from a command line first to check it. Reboot router/computer and check again / check dns at node. ...mike/kb8jnm On 5/7/2018 11:27 AM, Mike wrote: start with the DTMF. listen to the readback of the failed connect. or Watch the console output but before you make any changes to the system, reboot it. If nothing has changed with your config than adjusting something is the wrong solution. The chances of something having gone wrong in memory is a bit higher in a rf environment and a reboot often will flush that out. If it does, you need to look at bad memory and/or rf getting on your wiring. But other possibilities exist. ...mike/kb8jnm On 5/6/2018 3:06 PM, k7ilo1@gmail.com <mailto:k7ilo1@gmail.com> wrote: Yes its been some time since I’ve monitored the emails because I’ve had way too many to try to read through them but…. I have a question to probably a common problem and easy fix. I am using the Dial distro of allstar which has been working great up to some point. So today I decided to fire up the old HT and dial up a node for some traffic to listen to. Connection failed is what I’m getting. No matter what node I try to dial up I get, Connection failed. All of my config files look ok and I have not done any changes to either my allstar node or my port forwarding on my router. Where might I start to find and resolve my issue. Thanks gang Harold K7ILO Node 27863 _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org <mailto:App_rpt-users@lists.allstarlink.org> http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
On 5/6/18 3:06 PM, k7ilo1@gmail.com wrote:
Connection failed is what I’m getting.
What node number? do 'iax2 show registry' from the asterisk cli and see if you're registered. Are you behind a NAT device? If so check your port forwarding (though you'd likely get a fail to connect message if this was the issue). -- Bryan Fields 727-409-1194 - Voice http://bryanfields.net
Port forwarding will not affect your ability to outbound connect, Only inbound traffic. But it never hurts to restart your router also if it was programmed correctly and worked in the beginning for the same reasons I mentioned earlier for the computer. ...mike/kb8jnm On 5/7/2018 11:32 AM, Bryan Fields wrote:
On 5/6/18 3:06 PM, k7ilo1@gmail.com wrote:
Connection failed is what I’m getting. What node number?
do 'iax2 show registry' from the asterisk cli and see if you're registered.
Are you behind a NAT device? If so check your port forwarding (though you'd likely get a fail to connect message if this was the issue).
participants (3)
-
Bryan Fields -
k7ilo1＠gmail.com -
Mike