Disabling ID functions
This is not glaringly obvious to me... so I'm wondering if it's possible or supported. I have my URI tied into a port of my repeater controller specifically for Allstar access and a few other things, and my ID requirement is being handled by the controller itself. How do I disable the ID coming from app_rpt? I saw these options in the rpt.conf file, but I wasn't sure if commenting them out or setting the time to "0" would effectively disable it? idrecording = |iK1LNX ; id recording or morse string see http://ohnosec.org/drupal/node/87 idtalkover = |iK1LNX ; Talkover ID (optional) default is none see http://ohnosec.org/drupal/node/129 idtime = 540000 ; id interval time (in ms) (optional) Default 5 minutes (300000 ms) politeid = 30000 ; time in milliseconds before ID timer expires to try and ID in the tail. (optional, default 30000) tnx Stephen K1LNX
Stephen, Take a look at the duplex setting at the top of rpt.conf more if you need it... 73, Steve N4IRS On 4/6/2016 9:18 AM, Stephen - K1LNX wrote:
This is not glaringly obvious to me... so I'm wondering if it's possible or supported. I have my URI tied into a port of my repeater controller specifically for Allstar access and a few other things, and my ID requirement is being handled by the controller itself.
How do I disable the ID coming from app_rpt? I saw these options in the rpt.conf file, but I wasn't sure if commenting them out or setting the time to "0" would effectively disable it?
idrecording = |iK1LNX ; id recording or morse string see http://ohnosec.org/drupal/node/87 idtalkover = |iK1LNX ; Talkover ID (optional) default is none see http://ohnosec.org/drupal/node/129 idtime = 540000 ; id interval time (in ms) (optional) Default 5 minutes (300000 ms) politeid = 30000 ; time in milliseconds before ID timer expires to try and ID in the tail. (optional, default 30000)
tnx Stephen K1LNX
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
Thanks Steve, this is what I have set: duplex = 0 ; 0 = Half duplex with no telemetry tones or hang time. linktolink = yes ; Special Case: Full duplex if linktolink is set to yes. ; This mode is preferred when interfacing with an external multiport repeater controller. Should I still be getting ID's in this case? On Wed, Apr 6, 2016 at 10:12 AM, Steve Zingman <szingman@msgstor.com> wrote:
Stephen, Take a look at the duplex setting at the top of rpt.conf
more if you need it... 73, Steve N4IRS
On 4/6/2016 9:18 AM, Stephen - K1LNX wrote:
This is not glaringly obvious to me... so I'm wondering if it's possible or supported. I have my URI tied into a port of my repeater controller specifically for Allstar access and a few other things, and my ID requirement is being handled by the controller itself.
How do I disable the ID coming from app_rpt? I saw these options in the rpt.conf file, but I wasn't sure if commenting them out or setting the time to "0" would effectively disable it?
idrecording = |iK1LNX ; id recording or morse string see http://ohnosec.org/drupal/node/87 idtalkover = |iK1LNX ; Talkover ID (optional) default is none see http://ohnosec.org/drupal/node/129 idtime = 540000 ; id interval time (in ms) (optional) Default 5 minutes (300000 ms) politeid = 30000 ; time in milliseconds before ID timer expires to try and ID in the tail. (optional, default 30000)
tnx Stephen K1LNX
_______________________________________________ App_rpt-users mailing listApp_rpt-users@ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
Stephen, Commenting out the "idrecording=" line should stop the ID. I have one of my nodes setup that way (with a separate controller) and it works for me. Thanks! On Wed, Apr 6, 2016 at 12:54 PM, Stephen - K1LNX <k1lnx@k1lnx.net> wrote:
Thanks Steve, this is what I have set:
duplex = 0 ; 0 = Half duplex with no telemetry tones or hang time. linktolink = yes ; Special Case: Full duplex if linktolink is set to yes. ; This mode is preferred when interfacing with an external multiport repeater controller.
Should I still be getting ID's in this case?
On Wed, Apr 6, 2016 at 10:12 AM, Steve Zingman <szingman@msgstor.com> wrote:
Stephen, Take a look at the duplex setting at the top of rpt.conf
more if you need it... 73, Steve N4IRS
On 4/6/2016 9:18 AM, Stephen - K1LNX wrote:
This is not glaringly obvious to me... so I'm wondering if it's possible or supported. I have my URI tied into a port of my repeater controller specifically for Allstar access and a few other things, and my ID requirement is being handled by the controller itself.
How do I disable the ID coming from app_rpt? I saw these options in the rpt.conf file, but I wasn't sure if commenting them out or setting the time to "0" would effectively disable it?
idrecording = |iK1LNX ; id recording or morse string see http://ohnosec.org/drupal/node/87 idtalkover = |iK1LNX ; Talkover ID (optional) default is none see http://ohnosec.org/drupal/node/129 idtime = 540000 ; id interval time (in ms) (optional) Default 5 minutes (300000 ms) politeid = 30000 ; time in milliseconds before ID timer expires to try and ID in the tail. (optional, default 30000)
tnx Stephen K1LNX
_______________________________________________ App_rpt-users mailing listApp_rpt-users@ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Andrew Sylthe KC9ONA
Andrew is correct. I THOUGHT duplex = 0 suppressed telemetry and IDs. It does not suppress IDs. commenting out idrecording and idtalkover (for good measure) seems to work. Back to editing comments in sample configs! Steve On 4/6/2016 2:57 PM, Andrew Sylthe wrote:
Stephen,
Commenting out the "idrecording=" line should stop the ID. I have one of my nodes setup that way (with a separate controller) and it works for me.
Thanks!
On Wed, Apr 6, 2016 at 12:54 PM, Stephen - K1LNX <k1lnx@k1lnx.net <mailto:k1lnx@k1lnx.net>> wrote:
Thanks Steve, this is what I have set:
duplex = 0 ; 0 = Half duplex with no telemetry tones or hang time. linktolink = yes ; Special Case: Full duplex if linktolink is set to yes. ; This mode is preferred when interfacing with an external multiport repeater controller.
Should I still be getting ID's in this case?
On Wed, Apr 6, 2016 at 10:12 AM, Steve Zingman <szingman@msgstor.com <mailto:szingman@msgstor.com>> wrote:
Stephen, Take a look at the duplex setting at the top of rpt.conf
more if you need it... 73, Steve N4IRS
On 4/6/2016 9:18 AM, Stephen - K1LNX wrote:
This is not glaringly obvious to me... so I'm wondering if it's possible or supported. I have my URI tied into a port of my repeater controller specifically for Allstar access and a few other things, and my ID requirement is being handled by the controller itself.
How do I disable the ID coming from app_rpt? I saw these options in the rpt.conf file, but I wasn't sure if commenting them out or setting the time to "0" would effectively disable it?
idrecording = |iK1LNX ; id recording or morse string see http://ohnosec.org/drupal/node/87 idtalkover = |iK1LNX ; Talkover ID (optional) default is none see http://ohnosec.org/drupal/node/129 idtime = 540000 ; id interval time (in ms) (optional) Default 5 minutes (300000 ms) politeid = 30000 ; time in milliseconds before ID timer expires to try and ID in the tail. (optional, default 30000)
tnx Stephen K1LNX
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Andrew Sylthe KC9ONA
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
You guys rock... that seems to have did it :) I was treading in that direction, but wasn't sure if that was the way to do it or not, so thanks for clarifying! 73 Stephen K1LNX On Wed, Apr 6, 2016 at 3:07 PM, Steve Zingman <szingman@msgstor.com> wrote:
Andrew is correct. I THOUGHT duplex = 0 suppressed telemetry and IDs. It does not suppress IDs. commenting out idrecording and idtalkover (for good measure) seems to work. Back to editing comments in sample configs!
Steve
On 4/6/2016 2:57 PM, Andrew Sylthe wrote:
Stephen,
Commenting out the "idrecording=" line should stop the ID. I have one of my nodes setup that way (with a separate controller) and it works for me.
Thanks!
On Wed, Apr 6, 2016 at 12:54 PM, Stephen - K1LNX <k1lnx@k1lnx.net> wrote:
Thanks Steve, this is what I have set:
duplex = 0 ; 0 = Half duplex with no telemetry tones or hang time. linktolink = yes ; Special Case: Full duplex if linktolink is set to yes. ; This mode is preferred when interfacing with an external multiport repeater controller.
Should I still be getting ID's in this case?
On Wed, Apr 6, 2016 at 10:12 AM, Steve Zingman < <szingman@msgstor.com> szingman@msgstor.com> wrote:
Stephen, Take a look at the duplex setting at the top of rpt.conf
more if you need it... 73, Steve N4IRS
On 4/6/2016 9:18 AM, Stephen - K1LNX wrote:
This is not glaringly obvious to me... so I'm wondering if it's possible or supported. I have my URI tied into a port of my repeater controller specifically for Allstar access and a few other things, and my ID requirement is being handled by the controller itself.
How do I disable the ID coming from app_rpt? I saw these options in the rpt.conf file, but I wasn't sure if commenting them out or setting the time to "0" would effectively disable it?
idrecording = |iK1LNX ; id recording or morse string see http://ohnosec.org/drupal/node/87 idtalkover = |iK1LNX ; Talkover ID (optional) default is none see <http://ohnosec.org/drupal/node/129> http://ohnosec.org/drupal/node/129 idtime = 540000 ; id interval time (in ms) (optional) Default 5 minutes (300000 ms) politeid = 30000 ; time in milliseconds before ID timer expires to try and ID in the tail. (optional, default 30000)
tnx Stephen K1LNX
_______________________________________________ App_rpt-users mailing listApp_rpt-users@ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Andrew Sylthe KC9ONA
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
participants (3)
-
Andrew Sylthe -
Stephen - K1LNX -
Steve Zingman