Stephen, Commenting out the "idrecording=" line should stop the ID. I have one of my nodes setup that way (with a separate controller) and it works for me. Thanks! On Wed, Apr 6, 2016 at 12:54 PM, Stephen - K1LNX <k1lnx@k1lnx.net> wrote:
Thanks Steve, this is what I have set:
duplex = 0 ; 0 = Half duplex with no telemetry tones or hang time. linktolink = yes ; Special Case: Full duplex if linktolink is set to yes. ; This mode is preferred when interfacing with an external multiport repeater controller.
Should I still be getting ID's in this case?
On Wed, Apr 6, 2016 at 10:12 AM, Steve Zingman <szingman@msgstor.com> wrote:
Stephen, Take a look at the duplex setting at the top of rpt.conf
more if you need it... 73, Steve N4IRS
On 4/6/2016 9:18 AM, Stephen - K1LNX wrote:
This is not glaringly obvious to me... so I'm wondering if it's possible or supported. I have my URI tied into a port of my repeater controller specifically for Allstar access and a few other things, and my ID requirement is being handled by the controller itself.
How do I disable the ID coming from app_rpt? I saw these options in the rpt.conf file, but I wasn't sure if commenting them out or setting the time to "0" would effectively disable it?
idrecording = |iK1LNX ; id recording or morse string see http://ohnosec.org/drupal/node/87 idtalkover = |iK1LNX ; Talkover ID (optional) default is none see http://ohnosec.org/drupal/node/129 idtime = 540000 ; id interval time (in ms) (optional) Default 5 minutes (300000 ms) politeid = 30000 ; time in milliseconds before ID timer expires to try and ID in the tail. (optional, default 30000)
tnx Stephen K1LNX
_______________________________________________ App_rpt-users mailing listApp_rpt-users@ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Andrew Sylthe KC9ONA