So, I've got some defines ... ;****************** ;* Stanza Defines * ;vvvvvvvvvvvvvvvvvv ; ;controlstates=controlstates29655 scheduler=schedule29655 morse=morse29657 macro=macro29655 functions=functions29655 phone_functions=functions29655 link_functions=functions29655 telemetry=telemetry29655 wait_times=wait-times29655 ; idtalkover=|iW5OMR R unlinkedct=ct2 ;Courtesy tone sound the node makes when not linked remotect=ct3 ;Courtesy tone sound the node makes when linked linkunkeyct=ct8 ;Courtesy tone sound the node makes when a remote linked system unkeys nolocallinkct=0 eannmode=2 echolinkdefault=0 echolinkdynamic=0 nounkeyct=0 telemdefault=2 ;temetry mode ; 0 = telemetry output off, ; 1 = telemetry output on, ; 2 = timed telemetry output on command execution and for a short time thereafter specifically, at this time, I'm concerned about Courtesy tones. So, let's go down to the telemetry stanza for 29655... [telemetry29655] ; ;when NOT linked ct2=|t(0,0,10,0)(350,440,10,2048)(0,0,10,0)(350,440,10,2048)(0,0,10,0)(350,440,10,2048)(0,0,10,0)(350,440,100,2048) ; ;when Linked ct3=|t(0,0,10,0)(880,440,150,2048)(0,0,10,0)(440,660,150,2048)(0,0,10,0)(880,440,150,2048)(0,0,10,0)(440,660,150,2048) ; ct4=|t(550,0,150,1048)(550,0,150,1048) ct5=|t(660,0,150,2048) ct6=|t(880,0,150,2048) ct7=|t(660,440,150,2048) ; When remote link unkeys ct8=|t(0,0,10,0)(350,440,50,2048)(0,0,50,0)(880,440,50,2048)(0,0,50,0)(350,440,50,2048) ; ct9=|t(660,680,100,4000)(0,0,100,0)(660,680,100,1000)(0,0,100,0)(660,680,100,250) remotetx=|t(500,0,10,1048)(0,0,10,0)(1000,0,10,1048) remotemon=|t(1009,0,50,2048) cmdmode=|icm ;(220,247,262,294,330,350,392,2048) functcomplete=|iEN patchup=rpt/callproceeding patchdown=rpt/callterminated ; ; ; This section allows wait times for telemetry events to be adjusted ; A section for wait times can be defined for every repeater ; [wait-times29655] telemwait=150 idwait=10 unkeywait=650 calltermwait=150 but, regardless of how I change the CT's, it remains the same, when asterisk is stopped and restarted, even when the machine is rebooted, the courtesy tone remains the same.
Courtesy tones are global. So, no way to have different stanzas for different nodes. At least, that's what I found a while back when I tried to have different stanzas. Maybe a newer SVN is out that I have not tested that allows it, I'm not sure. N5ZUA On 2/3/2015 9:46 AM, Geoff wrote:
So, I've got some defines ...
;****************** ;* Stanza Defines * ;vvvvvvvvvvvvvvvvvv ; ;controlstates=controlstates29655 scheduler=schedule29655 morse=morse29657 macro=macro29655 functions=functions29655 phone_functions=functions29655 link_functions=functions29655 telemetry=telemetry29655 wait_times=wait-times29655 ; idtalkover=|iW5OMR R unlinkedct=ct2 ;Courtesy tone sound the node makes when not linked remotect=ct3 ;Courtesy tone sound the node makes when linked linkunkeyct=ct8 ;Courtesy tone sound the node makes when a remote linked system unkeys nolocallinkct=0 eannmode=2 echolinkdefault=0 echolinkdynamic=0 nounkeyct=0 telemdefault=2 ;temetry mode ; 0 = telemetry output off, ; 1 = telemetry output on, ; 2 = timed telemetry output on command execution and for a short time thereafter
specifically, at this time, I'm concerned about Courtesy tones. So, let's go down to the telemetry stanza for 29655...
[telemetry29655] ; ;when NOT linked ct2=|t(0,0,10,0)(350,440,10,2048)(0,0,10,0)(350,440,10,2048)(0,0,10,0)(350,440,10,2048)(0,0,10,0)(350,440,100,2048) ; ;when Linked ct3=|t(0,0,10,0)(880,440,150,2048)(0,0,10,0)(440,660,150,2048)(0,0,10,0)(880,440,150,2048)(0,0,10,0)(440,660,150,2048) ; ct4=|t(550,0,150,1048)(550,0,150,1048) ct5=|t(660,0,150,2048) ct6=|t(880,0,150,2048) ct7=|t(660,440,150,2048) ; When remote link unkeys ct8=|t(0,0,10,0)(350,440,50,2048)(0,0,50,0)(880,440,50,2048)(0,0,50,0)(350,440,50,2048) ; ct9=|t(660,680,100,4000)(0,0,100,0)(660,680,100,1000)(0,0,100,0)(660,680,100,250) remotetx=|t(500,0,10,1048)(0,0,10,0)(1000,0,10,1048) remotemon=|t(1009,0,50,2048) cmdmode=|icm ;(220,247,262,294,330,350,392,2048) functcomplete=|iEN patchup=rpt/callproceeding patchdown=rpt/callterminated ; ; ; This section allows wait times for telemetry events to be adjusted ; A section for wait times can be defined for every repeater ; [wait-times29655] telemwait=150 idwait=10 unkeywait=650 calltermwait=150
but, regardless of how I change the CT's, it remains the same, when asterisk is stopped and restarted, even when the machine is rebooted, the courtesy tone remains the same.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
The only one that is global is the link tx tone. No reason you couldn't define the other ones. For example I have my unlinked courtesy tone on my public node ct=26 and the private one in the same box ct=31. The only one that is global is the link transmit tone. Corey
On Feb 3, 2015, at 2:36 PM, Steve Agee <n5zua@earthlink.net> wrote:
Courtesy tones are global. So, no way to have different stanzas for different nodes. At least, that's what I found a while back when I tried to have different stanzas. Maybe a newer SVN is out that I have not tested that allows it, I'm not sure.
N5ZUA
On 2/3/2015 9:46 AM, Geoff wrote: So, I've got some defines ...
;****************** ;* Stanza Defines * ;vvvvvvvvvvvvvvvvvv ; ;controlstates=controlstates29655 scheduler=schedule29655 morse=morse29657 macro=macro29655 functions=functions29655 phone_functions=functions29655 link_functions=functions29655 telemetry=telemetry29655 wait_times=wait-times29655 ; idtalkover=|iW5OMR R unlinkedct=ct2 ;Courtesy tone sound the node makes when not linked remotect=ct3 ;Courtesy tone sound the node makes when linked linkunkeyct=ct8 ;Courtesy tone sound the node makes when a remote linked system unkeys nolocallinkct=0 eannmode=2 echolinkdefault=0 echolinkdynamic=0 nounkeyct=0 telemdefault=2 ;temetry mode ; 0 = telemetry output off, ; 1 = telemetry output on, ; 2 = timed telemetry output on command execution and for a short time thereafter
specifically, at this time, I'm concerned about Courtesy tones. So, let's go down to the telemetry stanza for 29655...
[telemetry29655] ; ;when NOT linked ct2=|t(0,0,10,0)(350,440,10,2048)(0,0,10,0)(350,440,10,2048)(0,0,10,0)(350,440,10,2048)(0,0,10,0)(350,440,100,2048) ; ;when Linked ct3=|t(0,0,10,0)(880,440,150,2048)(0,0,10,0)(440,660,150,2048)(0,0,10,0)(880,440,150,2048)(0,0,10,0)(440,660,150,2048) ; ct4=|t(550,0,150,1048)(550,0,150,1048) ct5=|t(660,0,150,2048) ct6=|t(880,0,150,2048) ct7=|t(660,440,150,2048) ; When remote link unkeys ct8=|t(0,0,10,0)(350,440,50,2048)(0,0,50,0)(880,440,50,2048)(0,0,50,0)(350,440,50,2048) ; ct9=|t(660,680,100,4000)(0,0,100,0)(660,680,100,1000)(0,0,100,0)(660,680,100,250) remotetx=|t(500,0,10,1048)(0,0,10,0)(1000,0,10,1048) remotemon=|t(1009,0,50,2048) cmdmode=|icm ;(220,247,262,294,330,350,392,2048) functcomplete=|iEN patchup=rpt/callproceeding patchdown=rpt/callterminated ; ; ; This section allows wait times for telemetry events to be adjusted ; A section for wait times can be defined for every repeater ; [wait-times29655] telemwait=150 idwait=10 unkeywait=650 calltermwait=150
but, regardless of how I change the CT's, it remains the same, when asterisk is stopped and restarted, even when the machine is rebooted, the courtesy tone remains the same.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Try this: unlinkedct=ct9 remotect=ct3 linkunkeyct=ct8 nounkeyct=0 In your Node Stanza.. Or whatever your tones are defined at.. On Tue, Feb 3, 2015 at 2:53 PM, Corey Dean <n3fe@repeater.net> wrote:
The only one that is global is the link tx tone. No reason you couldn't define the other ones. For example I have my unlinked courtesy tone on my public node ct=26 and the private one in the same box ct=31. The only one that is global is the link transmit tone.
Corey
On Feb 3, 2015, at 2:36 PM, Steve Agee <n5zua@earthlink.net> wrote:
Courtesy tones are global. So, no way to have different stanzas for different nodes. At least, that's what I found a while back when I tried to have different stanzas. Maybe a newer SVN is out that I have not tested that allows it, I'm not sure.
N5ZUA
On 2/3/2015 9:46 AM, Geoff wrote: So, I've got some defines ...
;****************** ;* Stanza Defines * ;vvvvvvvvvvvvvvvvvv ; ;controlstates=controlstates29655 scheduler=schedule29655 morse=morse29657 macro=macro29655 functions=functions29655 phone_functions=functions29655 link_functions=functions29655 telemetry=telemetry29655 wait_times=wait-times29655 ; idtalkover=|iW5OMR R unlinkedct=ct2 ;Courtesy tone sound the node makes when not linked remotect=ct3 ;Courtesy tone sound the node makes when linked linkunkeyct=ct8 ;Courtesy tone sound the node makes when a remote linked system unkeys nolocallinkct=0 eannmode=2 echolinkdefault=0 echolinkdynamic=0 nounkeyct=0 telemdefault=2 ;temetry mode ; 0 = telemetry output off, ; 1 = telemetry output on, ; 2 = timed telemetry output on command execution and for a short time thereafter
specifically, at this time, I'm concerned about Courtesy tones. So, let's go down to the telemetry stanza for 29655...
[telemetry29655] ; ;when NOT linked
ct2=|t(0,0,10,0)(350,440,10,2048)(0,0,10,0)(350,440,10,2048)(0,0,10,0)(350,440,10,2048)(0,0,10,0)(350,440,100,2048)
; ;when Linked
ct3=|t(0,0,10,0)(880,440,150,2048)(0,0,10,0)(440,660,150,2048)(0,0,10,0)(880,440,150,2048)(0,0,10,0)(440,660,150,2048)
; ct4=|t(550,0,150,1048)(550,0,150,1048) ct5=|t(660,0,150,2048) ct6=|t(880,0,150,2048) ct7=|t(660,440,150,2048) ; When remote link unkeys
ct8=|t(0,0,10,0)(350,440,50,2048)(0,0,50,0)(880,440,50,2048)(0,0,50,0)(350,440,50,2048)
;
ct9=|t(660,680,100,4000)(0,0,100,0)(660,680,100,1000)(0,0,100,0)(660,680,100,250)
remotetx=|t(500,0,10,1048)(0,0,10,0)(1000,0,10,1048) remotemon=|t(1009,0,50,2048) cmdmode=|icm ;(220,247,262,294,330,350,392,2048) functcomplete=|iEN patchup=rpt/callproceeding patchdown=rpt/callterminated ; ; ; This section allows wait times for telemetry events to be adjusted ; A section for wait times can be defined for every repeater ; [wait-times29655] telemwait=150 idwait=10 unkeywait=650 calltermwait=150
but, regardless of how I change the CT's, it remains the same, when asterisk is stopped and restarted, even when the machine is rebooted, the courtesy tone remains the same.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
On 02/03/2015 03:49 PM, Sam Nabkey wrote:
Try this:
unlinkedct=ct9 remotect=ct3 linkunkeyct=ct8 nounkeyct=0
In your Node Stanza.. Or whatever your tones are defined at..
It just got stranger... I commented ( ; ) all of the defined tones in rpt.conf, in both node stanza's and the thing -still- has the same courtesy tone. uhm ... dat ain' 'posed ta happen... izzit? it's got ME scratching my noggin!
There are hard coded defaults so commenting CTs will really confuse you. Create a unique tone and replace it one by one to see what changes. Regards, Mike Montalvo, KF7MBK ARA Membership Chair www.w7ara.org On Tue, Feb 3, 2015 at 3:36 PM, Geoff <ars.w5omr@gmail.com> wrote:
On 02/03/2015 03:49 PM, Sam Nabkey wrote:
Try this:
unlinkedct=ct9 remotect=ct3 linkunkeyct=ct8 nounkeyct=0
In your Node Stanza.. Or whatever your tones are defined at..
It just got stranger...
I commented ( ; ) all of the defined tones in rpt.conf, in both node stanza's and the thing -still- has the same courtesy tone.
uhm ... dat ain' 'posed ta happen... izzit?
it's got ME scratching my noggin!
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
On 02/03/2015 05:05 PM, Mike M wrote:
There are hard coded defaults so commenting CTs will really confuse you.
Create a unique tone and replace it one by one to see what changes.
ah, but there's the issue, Mike... The CT that's playing now ... *IS* a custom CT that is now no longer defined.
Did you do a rpt reload at the asterisk cli and you commented it out? Corey
On Feb 3, 2015, at 7:17 PM, Geoff <ars.w5omr@gmail.com> wrote:
On 02/03/2015 05:05 PM, Mike M wrote: There are hard coded defaults so commenting CTs will really confuse you.
Create a unique tone and replace it one by one to see what changes.
ah, but there's the issue, Mike...
The CT that's playing now ... *IS* a custom CT that is now no longer defined.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (5)
-
Corey Dean -
Geoff -
Mike M -
Sam Nabkey -
Steve Agee