On 3/7/17 6:09 PM, Luis V. Romero wrote:
I got the “demo”DynaDish5client from W9CR, but his passworddidn’twork, so I reset the device to default. Figure I may as well learn to configure this thing on my own. However, I think I need some help…J
I have placed it at around 10 feet off the ground for testing. In WinBox, I see lots of neighborhood AP’s on 5Gigs, especially my own. My noise floor is -104 to -106 depending on frequency. My own 5G AP is the “loudest” at a SNR of 45. Moths other neighborhood devices read around 25-35
I have yet to log any signals on 5.9G–Isee many A, P and AP MAC’son5.180 through 5.805, but nothing above that. Several MAC’s have no SSID – not uncommon. Lots of BHN 5G hitsplus the Peace Brazilian Baptist Church network which seems quite busyin the snooperJ
You need the config loaded and "superchannel" enabled to add the 5.9 GHz channels into the system. After it's loaded you'll not see the unlicensed stuff.
I note that there is a configuration text file on the website. Should I assume that this isa script? I have changed the notation for my station name – W4LT-1–But, again, I reset the system to factory default.
You'll need to edit the config file and dump it into the device via telnet/ssh/terminal. You'll see it it dump in there, typically I do line by line in case you have errors. I've made up a config you can dump into the radio and has your callsign in it. You'll need to change the admin password to whatever you want. 73's -- Bryan Fields, W9CR Florida Simulcast Group, Inc.