Hi guys: I got the "demo" DynaDish5 client from W9CR, but his password didn't work, so I reset the device to default. Figure I may as well learn to configure this thing on my own. However, I think I need some help. :-) I have placed it at around 10 feet off the ground for testing. In WinBox, I see lots of neighborhood AP's on 5Gigs, especially my own. My noise floor is -104 to -106 depending on frequency. My own 5G AP is the "loudest" at a SNR of 45. Moths other neighborhood devices read around 25-35 I have yet to log any signals on 5.9G - I see many A, P and AP MAC's on 5.180 through 5.805, but nothing above that. Several MAC's have no SSID - not uncommon. Lots of BHN 5G hits plus the Peace Brazilian Baptist Church network which seems quite busy in the snooper :-) I note that there is a configuration text file on the website. Should I assume that this is a script? I have changed the notation for my station name - W4LT-1 - But, again, I reset the system to factory default. I attempted to run this "script" in terminal and execute it. Is this how I "load" this configuration? It uploaded into the device, but I don't know if I executed it or not. Some help in configuration would be appreciated so I can then move this thing to the roof and see if I can get on either Tampa or St Pete. I may have a tree blocking Tampa, but my shot to St Pete is much clearer. but much farther away. -lu - W4LT -