[App_rpt-users] Using a Master II

[Jon Rorke]

  I have set up a Master II repeater station in full duplex mode using a 
URI for dsp squelch and dsp pl decode and it works just fine. The main 
thing is to connect it to the volume/squelch hi (raw discriminator) or 
you will have problems. The master II should be able to give you 1V p-p 
output with 1k tone @ 3k dev on the volumw/squelch hi which is not 
available on the back plane. You have to pull it off one of the 
connectors on the drawer. Have to check my notes on what pin.

Any way I have a couple of units working in this manner with no problems.

Jon VA3RQ

On 10/6/2010 7:46 AM, Corey Dean N3FE wrote:
>
> So I have been using a GE Master II repeater (actual repeater, not a 
> converted mobile) for the allstar node in full duplex repeater mode.  
> I noticed it just doesn't dig too well when using the fob to decode 
> the PL.  I have a maxtrac on another fob and that will dig into the 
> noise great.  As a test I hooked up a ts32 and ran the output of that 
> in the CAS/COR on the fob and it worked great!  I want to try to get 
> the built in decoder working correctly though.  Another friend of mine 
> is also running a GE Master II and he is having the same problem.  
> When we run the rxnoise level from either the radio-tune-menu or using 
> the radio tune command from asterisk it always fails.  Anyone have any 
> suggestions on a way to resolve this?   I have another use for my 
> hardware pl decoder so I would like to get the USB Frob working 
> correctly!!!!
>
> Corey  N3FE
>
>
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at qrvc.com
> http://qrvc.com/mailman/listinfo/app_rpt-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20101006/582ec0e7/attachment.html>