[App_rpt-users] Slow green led flashing on uri?

[Ken]

My understanding is that the USB protocol requires 3 (re)tries on error.
If you get the "slow blink" your USB comms are not working. Or they are
working and returning all garbage.

Ken

PS: On my 3 systems the basic blink rate is faster than 1/second - more like
3-4/second

> -----Original Message-----
> From: app_rpt-users-bounces at ohnosec.org [mailto:app_rpt-users-
> bounces at ohnosec.org] On Behalf Of Anthony Percy
> Sent: Saturday, September 08, 2012 7:37 AM
> To: app_rpt-users at ohnosec.org
> Subject: Re: [App_rpt-users] Slow green led flashing on uri?
> 
> Hi all,
> The plot thickens.... I need to explain what I mean by the flashing green
LED
> on the C-Media based URI... Normally when it is connected to our main
> repeater allstar PC and working, it flashes at about once a second...
However
> on the new ASUS mobo Allstar ACID build it only flashes about once every
2-3
> seconds once asterisk has started... As you have guessed it does not pass
> repeater audio in this state. But it did once when it was unplugged and
then
> plugged in, it flashed at once a second and the repeater audio worked on
the
> new ASUS mobo.
> 
> Has anyone had a similar experience???
> Its looking more like to me that it is a problem with the latest ACID
install and
> the new ASUS i3 motherboard we are using....
> Whats strange is there are no errors in the message logs ( system and
> asterisk) or when you debug rpt in the asterisk console...
> The other symptom is sometimes when you plug or unplug the URI in, it
> hangs the PC!!!
> 
> Could some explain why the URI flashes at once a second when it is
> operational and under what condition it would flash slower???
> 
> Regards
> 
> Anthony VK2ACP
> 
> 
> 
> 
> On Mon, Sep 3, 2012 at 1:04 PM, Anthony Percy <anthcp at gmail.com> wrote:
> > Hi all,
> > Tried to make a backup of an allstar server onto a new i3 Asus mobo.
> > Loaded acid install and works apart from onboard netcard which was fixed
> by a new driver.
> > However with the backup config files loaded all we get is hum when we
> plugged on the repeater uri. We thought it was a ground loop problem
untill
> after a reboot it all worked, audio on the repeater was fine!!! On reboot
we
> were back to hum... Someone then noticed the uri green led was flashing
> slower than when it was working ok...any ideas????
> >
> > Regards
> >
> > VK2ACP
> _______________________________________________
> App_rpt-users mailing list
> App_rpt-users at ohnosec.org
> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users