[App_rpt-users] ACID not starting Asterisk

[Stephen Liggett]

Yes, service asterisk start works fine

As per Jim, asterisk -vvvvcn 
lots of messages come forward but these are interesting:

ERROR: numrxcodes != numtxcodes 
    -- rpt (Rx) initiating call to Radio/usb28325 on Radio/usb28325
  == Set device 3-1 to usb28325
ERROR: numrxcodes != numtxcodes 
[Sep 25 06:03:22] WARNING[2255]: chan_usbradio.c:1697 hidthread: Loaded parameters from usbradio_tune_usb28325.conf for device usb28325 .
[Sep 25 06:03:22] WARNING[2254]: chan_usbradio.c:2669 usbradio_read: Possibly stuck USB read channel. [usb28325]
    -- Registered IAX2 to '67.215.233.178', who sees us as 97.106.63.164:4569 with no messages waiting

[Sep 25 06:03:22] WARNING[2254]: chan_usbradio.c:2672 usbradio_read: Nope, USB read channel [usb28325] wasn't stuck after all.


So it stutters, but finally makes it.

If I just do asterisk -r after reboot, I get a similar message:

Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?)

and no, I don't see this file.

If I type safe_asterisk, I am good to go, with assterisk -r then working fine.

As per my previous note, is it usual for run levels 0 and 1 to be off?



steve
W3RX



and when I look. there is no 


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20120925/7bf568e1/attachment.html>