[App_rpt-users] ACID not starting Asterisk

[Jim Duuuude]

hmmm that looks like its working...

From: sbliggett2 at gmail.com
Date: Tue, 25 Sep 2012 06:21:53 -0400
To: app_rpt-users at ohnosec.org
Subject: Re: [App_rpt-users] ACID not starting Asterisk

Yes, service asterisk start works fine
As per Jim, asterisk -vvvvcn lots of messages come forward but these are interesting:
ERROR: numrxcodes != numtxcodes     -- rpt (Rx) initiating call to Radio/usb28325 on Radio/usb28325  == Set device 3-1 to usb28325ERROR: numrxcodes != numtxcodes [Sep 25 06:03:22] WARNING[2255]: chan_usbradio.c:1697 hidthread: Loaded parameters from usbradio_tune_usb28325.conf for device usb28325 .[Sep 25 06:03:22] WARNING[2254]: chan_usbradio.c:2669 usbradio_read: Possibly stuck USB read channel. [usb28325]    -- Registered IAX2 to '67.215.233.178', who sees us as 97.106.63.164:4569 with no messages waiting
[Sep 25 06:03:22] WARNING[2254]: chan_usbradio.c:2672 usbradio_read: Nope, USB read channel [usb28325] wasn't stuck after all.

So it stutters, but finally makes it.
If I just do asterisk -r after reboot, I get a similar message:
Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?)
and no, I don't see this file.
If I type safe_asterisk, I am good to go, with assterisk -r then working fine.
As per my previous note, is it usual for run levels 0 and 1 to be off?


steveW3RX


and when I look. there is no 


_______________________________________________
App_rpt-users mailing list
App_rpt-users at ohnosec.org
http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.keekles.org/pipermail/app_rpt-users/attachments/20120925/24294471/attachment.html>