- Allstar-Digital - lists.keekles.org

Re: [Allstar Digital] DMRlink first questions
by Steve Zingman 11 Dec '15

11 Dec '15

Robert, I'm on my phone so this is short. Read dmrlink.cfg it tells you how to define a peer and or master. Sent via smoke signal (Verizon) On Dec 11, 2015 2:46 PM, Robert Newberry <N1XBM(a)amsat.org> wrote: I have my repeater on a dummy load and the RPI2 and my laptop all on a unmanaged switch for testing. On dmrlink.cfg My thought was to make the RPI2 running dmrlink the master and my repeater as the peer. Is this possible? I am unsure how I would do that. My guess is I would put the IP of the RPI2 in the dmrlink.cfg Steve, had mentioned get my repeater parroting on a tg. So I looked at playback.py I see tg ID for a group call is 12345 on ts2 and private is the same except ts 1 and 2. So if I set my radio up accordingly. I should parrot on those IDs. What other files do I need to edit? N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658 _______________________________________________ Allstar-Digital mailing list Allstar-Digital(a)lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital

1 0

Bruce Perens On Problems With the Open Hardware Model
by Mike Zingman 11 Dec '15

11 Dec '15

I know it is old (ish) but I had not watched it yet. For this list I thought this segment was interesting: Video link: http://arvideonews.com/hrn/HRN_Episode_0226.html Watch the section from 7:54 to 10:34 which deals with the AMBE codec and patent issues. Mike

1 0

Re: [Allstar Digital] DMR to AllStar
by Steve Zingman 09 Dec '15

09 Dec '15

David, If you notice, your radio is programmed for CC1, TS2, TG9 and then you say, out TG4639. With the DV4M software, you can select which reflector you connect to. In other words you use the DV4M software to choose the Master AND reflector number. The way we are connected to DMRPlus is the same, we select the Master we stay connected to. The difference is how we choose which reflector to connect to. If I want Ref 4639, I have in my contact list 4639, I press PTT, release PTT and switch back to TG9, I will hear the voice confirmation "reflector 4639" I'm transmitting TG9 and receiving TG9. I believe that you can do the same thing with a DV4M. I'll try it when I get a chance. 73, Steve N4IRS On 12/09/2015 03:11 PM, David KE6UPI wrote: > Hey Steve, > > Right my DMR radio is set to Color 1 TS 2 and TG9 that passes through > to my DV4Mini and software to the DMR master "Master-USA-NE-VA" then > out TG4639 "Nationwide". > > David > > On Wed, Dec 9, 2015 at 11:37 AM, Steve Zingman <szingman(a)msgstor.com > <mailto:szingman@msgstor.com>> wrote: > > David, > The way a reflector works is you talk on TG9 all the time. You > kerckunk 4639 to select reflector 4639. So audio is only passed on > TG9. > > Steve > > > > Sent via smoke signal (AT&T 4G LTE) > > > -------- Original message -------- > From: David KE6UPI <dshaw(a)ke6upi.com <mailto:dshaw@ke6upi.com>> > Date: 12/09/2015 2:25 PM (GMT-05:00) > To: Digital linking using Asterisk and app_rpt > <allstar-digital(a)lists.keekles.org> > Subject: Re: [Allstar Digital] DMR to AllStar > > Thanks Mike that does help.. Back to the other email.. So when we > use the DV4Mini software we go out talkgroup 4639 and 4639 is not > listed in _tg_filter = 2,3,13,3174,3777215,3100,9,9998,3112. > > Anyways thanks, David > > On Wed, Dec 9, 2015 at 10:02 AM, Steve Zingman > <szingman(a)msgstor.com> wrote: > > David, > See if this helps. > <https://github.com/N4IRS/DMRGateway/blob/master/DMRGateway.pdf> > <https://github.com/N4IRS/DMRGateway/blob/master/DMRGateway.pdf> > > On 12/9/2015 11:44 AM, David KE6UPI wrote: >> Thanks Mike for the reply. >> >> My setup right now is DV4Mini and the Control Panel on my PC. >> But I really want to understand and help with the Allstar to >> DMR if I can.. I'm not a programmer and I'm very new to DMR. >> So the best I can do would be that guy to help test maybe. I >> can open my firewall to one of my RPi 2 on a 2nd network here >> at home so you could connect and play on the RPi 2. >> >> How are you connecting DMR to apt_rpt. Are you using >> chan_usrp? If so can you share your setup? >> >> Thanks again Mike >> >> David >> >> On Wed, Dec 9, 2015 at 8:10 AM, Mike Zingman >> <mike.zingman(a)gmail.com> wrote: >> >> David, >> >> The ambe_audio.py is using a list of Talk Groups (TG). >> When ever any of the TGs in the list are encountered, the >> AMBE will be decoded and passed to Allstar. The current >> list of TGs is defined in ambe_audio.cfg: >> >> _tg_filter = 2,3,13,3174,3777215,3100,9,9998,3112 >> >> >> So, node 2100 is looking for all of the above and will >> re-transmit them on Allstar. Looking deeper, we see TG9, >> but what reflector? We are currently pointing our TG9 >> routes to reflector 4639 as you can see here: >> >> http://174.36.222.36/ >> >> Now, with that said, I did notice last night that when I >> was playing on TG9/4639 and I was not seeing myself on >> the log output of DMRLink. Steve may have turned that >> off for a moment or there was a connectivity problem, but >> you should be able to use your DV4Mini with standard >> control panel and transmit on 4639 and hear yourself on 2100. >> >> Mike >> >> >> >> On Wed, Dec 9, 2015 at 7:40 AM, David KE6UPI >> <dshaw(a)ke6upi.com> wrote: >> >> Hello Mike, I have some questions about the DV4Mini I >> hope you could answer for me. When I have it setup I >> going seem to get the Talkgroup 9. I'm using a MD380 >> radio and would like to get on North America so I can >> hear myself on the Allstar node 2100. I have North >> America programmed on my radio. >> >> Any help would be great. >> >> David >> KE6UPI >> >> On Sun, Dec 6, 2015 at 11:12 AM, Mike Zingman >> <mike.zingman(a)gmail.com> wrote: >> >> So we have a different thread for this device.. >> >> From my perspective the dv4m is an interesting >> widget. The hardware is not special (it has been >> done before) but it is solid and inexpensive. It >> offers a fully digital interface to DMR from the >> RF side. With the published interface (see >> http://dv4m.ham-dmr.ch/Dokumentation/TechnicalDocs/dv4mini_interface.pdf) >> you can fully control the radio. >> >> The challenge is to use the raw I/O commands and >> build up an OPEN system that will let us >> experiment. Towards that end I have started a >> framework that lets me communicate with the >> dongle. This was fairly easy and is currently >> sending and receiving DMR frames from my host >> software. >> >> I have also added code to the host to send and >> receive point to point packets of DMR frames and >> will be testing this soon. I have more work to >> do here to finish the frame decoder, which will >> be used to better synchronize the two peers. >> >> As you might expect, I have several different >> projects all in the works, so multitasking this >> at the moment. My eventual goal is to have a >> generic framework that I can then use to connect >> any source with any sinc (read local DMR >> subscriber radio with the world). >> >> So, why reinvent the wheel? The dv4m already >> connects with the DMRPlus and other networks. >> What more could a ham want? The easy answer: to >> experiment. The current code is not *open* and >> can not be used as the basis for other projects. >> In order to make this happen, open source is >> required. All of the code I am working on for >> the dv4m will be published so others can build >> upon it. >> >> >> Mike >> >> >> _______________________________________________ >> Allstar-Digital mailing list >> Allstar-Digital(a)lists.keekles.org >> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital >> >> >> >> _______________________________________________ >> Allstar-Digital mailing list >> Allstar-Digital(a)lists.keekles.org >> <mailto:Allstar-Digital@lists.keekles.org> >> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital >> >> >> >> _______________________________________________ >> Allstar-Digital mailing list >> Allstar-Digital(a)lists.keekles.org >> <mailto:Allstar-Digital@lists.keekles.org> >> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital >> >> >> >> >> _______________________________________________ >> Allstar-Digital mailing list >> Allstar-Digital(a)lists.keekles.org >> <mailto:Allstar-Digital@lists.keekles.org> >> http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital > > > _______________________________________________ > Allstar-Digital mailing list > Allstar-Digital(a)lists.keekles.org > <mailto:Allstar-Digital@lists.keekles.org> > http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital > > > > _______________________________________________ > Allstar-Digital mailing list > Allstar-Digital(a)lists.keekles.org > <mailto:Allstar-Digital@lists.keekles.org> > http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital > > -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic

3 4

DV4Mini
by Mike Zingman 09 Dec '15

09 Dec '15

So we have a different thread for this device.. >From my perspective the dv4m is an interesting widget. The hardware is not special (it has been done before) but it is solid and inexpensive. It offers a fully digital interface to DMR from the RF side. With the published interface (see http://dv4m.ham-dmr.ch/Dokumentation/TechnicalDocs/dv4mini_interface.pdf) you can fully control the radio. The challenge is to use the raw I/O commands and build up an OPEN system that will let us experiment. Towards that end I have started a framework that lets me communicate with the dongle. This was fairly easy and is currently sending and receiving DMR frames from my host software. I have also added code to the host to send and receive point to point packets of DMR frames and will be testing this soon. I have more work to do here to finish the frame decoder, which will be used to better synchronize the two peers. As you might expect, I have several different projects all in the works, so multitasking this at the moment. My eventual goal is to have a generic framework that I can then use to connect any source with any sinc (read local DMR subscriber radio with the world). So, why reinvent the wheel? The dv4m already connects with the DMRPlus and other networks. What more could a ham want? The easy answer: to experiment. The current code is not *open* and can not be used as the basis for other projects. In order to make this happen, open source is required. All of the code I am working on for the dv4m will be published so others can build upon it. Mike

3 5

Netwatch
by David KE6UPI 08 Dec '15

08 Dec '15

I see an Allstar on the DMR Netwatch website.. Very cool 09:36:29.438 Dec 86.1 AllStar-CC CHI-DMR0.0%

2 2

Config Files
by David Shaw 08 Dec '15

08 Dec '15

Sorry Guys, I'm Sorry. Can you point me to what config files need to be changed. -- In 1988, America was strong. We had Ronald Reagan, Steve Jobs, Johnny Cash, and Bob Hope. Today, we have Obama, no Jobs, no Cash, and no Hope. Thanks, David

3 6

NorCal website
by David KE6UPI 08 Dec '15

08 Dec '15

So playing around I found a website that lets you see who just keyed up when you are linked to ASL node 2100 over the DMR network. http://norcaldmr.org/Network%20Usage%20Datat/NorCal%20DMR%20Last%20Heard/ Thanks, David

1 0

Allstar RCTM for SALE
by Michael Hebert 08 Dec '15

08 Dec '15

I have 2 RTCM for sale. $200 each plus $5.95 each flat rate shipping Please contact me off list Michael KD5DFB mhebert1975(a)gmail.com

1 0

Micro SDHC Cards
by Steve N4IRS 07 Dec '15

07 Dec '15

Pretty good price, especially if you have prime shipping. Back-ordered. Due in stock December 8 <http://tinyurl.com/ol9xxsj> 73, Steve N4IRS -- ,,, (o o) -----ooO-(_)-Ooo------ --- N4IRS was Here ---

3 2

DMRGateway install script
by Steve Zingman 06 Dec '15

06 Dec '15

I have updated the repo and added a script to install DMRlink, DV3000 and DMRGateway on a RPi2 DIAL. to run: login as root cd /srv wget https://github.com/N4IRS/DMRlink/raw/master/dmr_install chmod +x dmr_install ./dmr_install Once complete, reboot. You now have all the parts. 73, Steve N4IRS -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic

2 4