Thanks Steve, I am having a couple issues with RPI1, should have probably used RPI2. The allstar install scripts I’m using are yours also. /srv/scripts/build_dahdi.sh This command returns: You do not appear to have the sources for the 4.1.16+ kernel installed. This appears to finish fine, but no Asterisk binary that I can locate. /srv/scripts/build_asterisk.sh So, struggling a bit on the Pi1. Thanks for any pointers, Mike From: Allstar-Digital <allstar-digital-bounces@lists.keekles.org> on behalf of Steve Zingman <szingman@msgstor.com> Organization: MSGStor Reply-To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org> Date: Saturday, January 30, 2016 at 10:28 PM To: Digital linking using Asterisk and app_rpt <allstar-digital@lists.keekles.org> Subject: Re: [Allstar Digital] First attempt ah, I need to check, but I may have to build a executable for you for the RPi1 I'll get back to you. Steve On 01/30/2016 10:26 PM, Michael J. Wolthuis wrote: My first attempt to start up /usr/local/bin/DMRGateway & I get Segmentation Fault immediately. Anyone else had that issue? I have DMRLink working as a peer, connected to our C-Bridge. I have AMBEserverGPIO working and listening on UDP. Do not yet have Asterisk started, is that the issue? Mike kb8zgl _______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.orghttp://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic _______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital