1) What version of RTCM firmware are you running? 2) What do you have your TxBufferLength set to (in the RTCM) ? Jim Date: Sun, 11 Aug 2013 19:43:36 -0500 From: mhebert1975@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] RTCM simulcast help All, I am trying to enable simulcast on my system. I have gone into the voter.conf and added the "transmit" statement. The 2nd repeater is not transmitting. I am using menu 98 and do not see the "PTT : 0" changing to 1 or the red TX indicator lighting up I have done a astres.sh and rebooted both RTCMs Here is my voter.conf [general]port = 667buflen = 120password = xxx [28304]KD5DFB_main=xxx,transmit,masterKD5DFB_site1=xxx,transmit Here is my menu 98 on the RTCM GPS Lock: 1 Connected: 1COR: 1EXT CTCSS IN: 0PTT: 0RSSI: 255Current Samples / Sec.: 8000Current Peak Audio Level: 1496Squelch Noise Gain Value: 21, Diode Cal. Value: 36, SQL pot 134 Current Time: Mon Aug 12, 2013 00:40:50.800Last Rx Pkt System time: 08/12/2013 00:40:50.800, diff: 0 msecLast Rx Pkt Timestamp time: 08/12/2013 00:40:50.780, diff: 20 msecLast Rx Pkt index: 0, inbounds: 0 _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users