All, I am trying to enable simulcast on my system. I have gone into the voter.conf and added the "transmit" statement. The 2nd repeater is not transmitting. I am using menu 98 and do not see the "PTT : 0" changing to 1 or the red TX indicator lighting up I have done a astres.sh and rebooted both RTCMs *Here is my voter.conf* [general] port = 667 buflen = 120 password = xxx [28304] KD5DFB_main=xxx,transmit,master KD5DFB_site1=xxx,transmit *Here is my menu 98 on the RTCM * GPS Lock: 1 Connected: 1 COR: 1 EXT CTCSS IN: 0 PTT: 0 RSSI: 255 Current Samples / Sec.: 8000 Current Peak Audio Level: 1496 Squelch Noise Gain Value: 21, Diode Cal. Value: 36, SQL pot 134 Current Time: Mon Aug 12, 2013 00:40:50.800 Last Rx Pkt System time: 08/12/2013 00:40:50.800, diff: 0 msec Last Rx Pkt Timestamp time: 08/12/2013 00:40:50.780, diff: 20 msec Last Rx Pkt index: 0, inbounds: 0
1) What version of RTCM firmware are you running? 2) What do you have your TxBufferLength set to (in the RTCM) ? Jim Date: Sun, 11 Aug 2013 19:43:36 -0500 From: mhebert1975@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] RTCM simulcast help All, I am trying to enable simulcast on my system. I have gone into the voter.conf and added the "transmit" statement. The 2nd repeater is not transmitting. I am using menu 98 and do not see the "PTT : 0" changing to 1 or the red TX indicator lighting up I have done a astres.sh and rebooted both RTCMs Here is my voter.conf [general]port = 667buflen = 120password = xxx [28304]KD5DFB_main=xxx,transmit,masterKD5DFB_site1=xxx,transmit Here is my menu 98 on the RTCM GPS Lock: 1 Connected: 1COR: 1EXT CTCSS IN: 0PTT: 0RSSI: 255Current Samples / Sec.: 8000Current Peak Audio Level: 1496Squelch Noise Gain Value: 21, Diode Cal. Value: 36, SQL pot 134 Current Time: Mon Aug 12, 2013 00:40:50.800Last Rx Pkt System time: 08/12/2013 00:40:50.800, diff: 0 msecLast Rx Pkt Timestamp time: 08/12/2013 00:40:50.780, diff: 20 msecLast Rx Pkt index: 0, inbounds: 0 _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
1) S/W Version: 1.26 08/10/2013 on both of them 2) 480 on both of them On Sun, Aug 11, 2013 at 8:34 PM, Jim Duuuude <telesistant@hotmail.com>wrote:
1) What version of RTCM firmware are you running?
2) What do you have your TxBufferLength set to (in the RTCM) ?
Jim
------------------------------ Date: Sun, 11 Aug 2013 19:43:36 -0500 From: mhebert1975@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] RTCM simulcast help
All,
I am trying to enable simulcast on my system. I have gone into the voter.conf and added the "transmit" statement. The 2nd repeater is not transmitting. I am using menu 98 and do not see the "PTT : 0" changing to 1 or the red TX indicator lighting up
I have done a astres.sh and rebooted both RTCMs
*Here is my voter.conf*
[general] port = 667 buflen = 120 password = xxx
[28304] KD5DFB_main=xxx,transmit,master KD5DFB_site1=xxx,transmit
*Here is my menu 98 on the RTCM *
GPS Lock: 1 Connected: 1 COR: 1 EXT CTCSS IN: 0 PTT: 0 RSSI: 255 Current Samples / Sec.: 8000 Current Peak Audio Level: 1496 Squelch Noise Gain Value: 21, Diode Cal. Value: 36, SQL pot 134 Current Time: Mon Aug 12, 2013 00:40:50.800 Last Rx Pkt System time: 08/12/2013 00:40:50.800, diff: 0 msec Last Rx Pkt Timestamp time: 08/12/2013 00:40:50.780, diff: 20 msec Last Rx Pkt index: 0, inbounds: 0
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
well, why dont you try something higher then 480... Date: Sun, 11 Aug 2013 20:37:49 -0500 Subject: Re: [App_rpt-users] RTCM simulcast help From: mhebert1975@gmail.com To: telesistant@hotmail.com CC: app_rpt-users@ohnosec.org 1) S/W Version: 1.26 08/10/2013 on both of them 2) 480 on both of them On Sun, Aug 11, 2013 at 8:34 PM, Jim Duuuude <telesistant@hotmail.com> wrote: 1) What version of RTCM firmware are you running? 2) What do you have your TxBufferLength set to (in the RTCM) ? Jim Date: Sun, 11 Aug 2013 19:43:36 -0500 From: mhebert1975@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] RTCM simulcast help All, I am trying to enable simulcast on my system. I have gone into the voter.conf and added the "transmit" statement. The 2nd repeater is not transmitting. I am using menu 98 and do not see the "PTT : 0" changing to 1 or the red TX indicator lighting up I have done a astres.sh and rebooted both RTCMs Here is my voter.conf [general]port = 667buflen = 120password = xxx [28304]KD5DFB_main=xxx,transmit,masterKD5DFB_site1=xxx,transmit Here is my menu 98 on the RTCM GPS Lock: 1 Connected: 1COR: 1EXT CTCSS IN: 0PTT: 0RSSI: 255Current Samples / Sec.: 8000Current Peak Audio Level: 1496Squelch Noise Gain Value: 21, Diode Cal. Value: 36, SQL pot 134 Current Time: Mon Aug 12, 2013 00:40:50.800Last Rx Pkt System time: 08/12/2013 00:40:50.800, diff: 0 msecLast Rx Pkt Timestamp time: 08/12/2013 00:40:50.780, diff: 20 msecLast Rx Pkt index: 0, inbounds: 0 _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
Just changed both of them to 3000 and rebooted. Also, rebooted the asterisk machine. Still no TX on KD5DFB_site1=xxx,transmit On Sun, Aug 11, 2013 at 8:39 PM, Jim Duuuude <telesistant@hotmail.com>wrote:
well, why dont you try something higher then 480...
------------------------------ Date: Sun, 11 Aug 2013 20:37:49 -0500 Subject: Re: [App_rpt-users] RTCM simulcast help From: mhebert1975@gmail.com To: telesistant@hotmail.com CC: app_rpt-users@ohnosec.org
1) S/W Version: 1.26 08/10/2013 on both of them
2) 480 on both of them
On Sun, Aug 11, 2013 at 8:34 PM, Jim Duuuude <telesistant@hotmail.com>wrote:
1) What version of RTCM firmware are you running?
2) What do you have your TxBufferLength set to (in the RTCM) ?
Jim
------------------------------ Date: Sun, 11 Aug 2013 19:43:36 -0500 From: mhebert1975@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] RTCM simulcast help
All,
I am trying to enable simulcast on my system. I have gone into the voter.conf and added the "transmit" statement. The 2nd repeater is not transmitting. I am using menu 98 and do not see the "PTT : 0" changing to 1 or the red TX indicator lighting up
I have done a astres.sh and rebooted both RTCMs
*Here is my voter.conf*
[general] port = 667 buflen = 120 password = xxx
[28304] KD5DFB_main=xxx,transmit,master KD5DFB_site1=xxx,transmit
*Here is my menu 98 on the RTCM *
GPS Lock: 1 Connected: 1 COR: 1 EXT CTCSS IN: 0 PTT: 0 RSSI: 255 Current Samples / Sec.: 8000 Current Peak Audio Level: 1496 Squelch Noise Gain Value: 21, Diode Cal. Value: 36, SQL pot 134 Current Time: Mon Aug 12, 2013 00:40:50.800 Last Rx Pkt System time: 08/12/2013 00:40:50.800, diff: 0 msec Last Rx Pkt Timestamp time: 08/12/2013 00:40:50.780, diff: 20 msec Last Rx Pkt index: 0, inbounds: 0
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
participants (2)
-
Jim Duuuude -
Michael Hebert