Yeah, that thought did occur to me. Thanks for the suggestion. Not a bad idea. Although if I can easily block inbound VoIP calls, that would still be preferred. On Thu Feb 12 2015 at 5:40:45 PM Bob Brown - WØNQX <bbrown@byrg.net> wrote:
Why don't you disable it while your not in range.
I use Putty to log in remotely to disable/re-enable it.
That is what I do with my private home node where I don't have absolute physical control.
-- Thanks in Advance
Bob Brown, WØNQX
Kansas City Metro Area
Quis custodiet ipsos custodes?
--
On Thu, Feb 12, 2015 at 6:37 PM, Elden Fenison <w7ldn@w7ldn.com> wrote:
I have a little node in my garage that runs on a simplex frequency at 5 watts. The range is probably a mile or two. This node was intended strictly for my own use. I use a HT to talk to it while I'm at home.
In thinking of the legal (FCC) ramifications of running a node... it seems I'm at risk. If anyone dials into the node via VoIP on either Echolink or Allstar... they will essentially be transmitting from my node radio. I do believe I need to be in control of the node (my station) at all times per FCC rules. Well, obviously if I'm at work and out of range, I can't be monitoring my node for illegal transmissions.
I can't be the first one with this question. I think denying all inbound VoIP calls might make this somewhat more safe. I know how to deny inbound Echolink calls via the deny statement.
But how do I deny inbound Allstar calls? Do I just make my node private? And how does one do that? Do I just comment out the "register" statement in iax.conf?
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.