You would also need to take out the ID and in the [telemetry] stanza, do the same for "remotetx=" as well. Some of these fields don't like true zero values, so you may cause Asterisk to die. If so, try some non-zero value that is small. N5ZUA On 1/28/2015 1:27 PM, Andrew Sylthe wrote:
Hello All,
I'm struggling to configure my simplex node in a particular way. As of right now I have duplex=0 specified for my node in rpt.conf. My goal is to maintain the functionality of duplex=0, but do want a courtesy tone to transmit ONLY when a remotely connected AllStar node unkeys. I do not want the simplex node to ID or transmit a courtesy tone for local transmissions. Has anyone else configured their node in such a way? If so, would you be willing to share your configuration.
I've tried setting duplex=1 in rpt.conf along with the following settings with no luck:
; Telemetry & Courtesy Tone Options telemetry=telemetry ;unlinkedct=ct2 ; Sent when not connected to another node remotect=ct3 ; Sent when remote base connected linkunkeyct=ct8 ; sent when a network user unkeys nolocallinkct=1 eannmode=2 echolinkdefault=0 echolinkdynamic=0 nounkeyct=0 holdofftelem=1 telemdefault=0 telemdynamic=0 guilinkdefault=0 guilinkdynamic=0 phonelinkdefault=0 phonelinkdynamic=0
Thank you in advance for anyone that is able to help!
-- Andrew Sylthe KC9ONA
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.