Bob, It looks like DKMS did not rebuild DAHDI properly. Please do as root: dpkg-reconfigure asl-dahdi-linux-dkms reboot Should now be fixed. Check DAHDI is running by: lsmod | grep dahdi 73, Steve N4IRS On 07/25/2018 04:38 AM, Bob Good wrote:
Hi Guys
I have tried loading ASL_1.01-20180228-armhf-nanopi image onto a NanoPi
Seems to load fine I run the updates etc then the Menu all seems OK but AllStar does not seem to run ?
return email: bob@Fot.com.au <mailto:bob@Fot.com.au>
NODE=47324
REGPASS=47324:xxxxx@register.allstarlink.org ; This must be changed to your node number, password
Call sign: VK6Z
Interface type: SimpleUSB/usb_47324 ; SimpleUSB
Echolink Callsign: INVALID
Echolink node: 000000 ASL node used:
Ping test to 8.8.8.8
PING 8.8.8.8 (8.8.8.8) 56(84) bytes of data.
64 bytes from 8.8.8.8: icmp_seq=1 ttl=117 time=60.5 ms
64 bytes from 8.8.8.8: icmp_seq=2 ttl=117 time=60.1 ms
64 bytes from 8.8.8.8: icmp_seq=3 ttl=117 time=59.8 ms
64 bytes from 8.8.8.8: icmp_seq=4 ttl=117 time=60.1 ms
--- 8.8.8.8 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3004ms
rtt min/avg/max/mdev = 59.856/60.180/60.579/0.357 ms
Ping test to register.allstarlink.org
PING register.allstarlink.org (67.215.233.178) 56(84) bytes of data.
64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=1 ttl=50 time=209 ms
64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=2 ttl=50 time=208 ms
64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=3 ttl=50 time=208 ms
64 bytes from seal.lambdatel.com (67.215.233.178): icmp_seq=4 ttl=50 time=287 ms
--- register.allstarlink.org ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3004ms
rtt min/avg/max/mdev = 208.420/228.404/287.132/33.912 ms
Ouput of ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.168.55 netmask 255.255.255.0 broadcast 192.168.168.255
inet6 fe80::6888:f0ff:fe2f:e5b prefixlen 64 scopeid 0x20<link>
ether 6a:88:f0:2f:0e:5b txqueuelen 1000 (Ethernet)
RX packets 2688 bytes 223583 (218.3 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 1227 bytes 325560 (317.9 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
device interrupt 33
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 32 bytes 2608 (2.5 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 32 bytes 2608 (2.5 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
Output of lsmod grep dahdi
IAX2 registry
Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?)
Asterisk version:
Unable to connect to remote asterisk (does /var/run/asterisk.ctl exist?)
Current date and time: 2018-07-23.11:36
updatenodelist service running?
root 657 0.0 0.4 4428 2392 ? Ss 11:14 0:00 /bin/bash /usr/local/bin/rc.updatenodelist &
root 1637 0.0 0.1 3764 548 pts/0 S+ 11:40 0:00 grep updatenodelist
/tmp/rpt_extnodes-temp file
-rw-r--r-- 1 root root 0 Jul 23 11:15 /tmp/rpt_extnodes-temp
/var/lib/asterisk/rpt_extnodes file
-rwx------ 1 root root 141311 Jul 23 11:09 /var/lib/asterisk/rpt_extnodes
####### Begin warnings from messages file
####### Begin warnings from messages.1 file
journalctl –xe
Using username "repeater".
repeater@repeater's password:
_ _ ____ _ _ _
| \ | | __ _ _ __ ___ | _ \(_) | \ | | ___ ___
| \| |/ _` | '_ \ / _ \| |_) | | | \| |/ _ \/ _ \
| |\ | (_| | | | | (_) | __/| | | |\ | __/ (_) |
|_| \_|\__,_|_| |_|\___/|_| |_| |_| \_|\___|\___/
Welcome to ARMBIAN 5.41 user-built Debian GNU/Linux 9 (stretch) 4.14.18-sunxi
System load: 0.00 0.02 0.00 Up time: 9 min Local users: 2
Memory usage: 10 % of 493MB IP: 192.168.168.54
CPU temp: 29°C
Usage of /: 10% of 15G
Last login: Mon Jul 23 10:04:18 2018 from 192.168.168.26
repeater@repeater:~$
repeater@repeater:~$ sudo -s
[sudo] password for repeater:
root@repeater:/home/repeater# journalctl -xe
-- The start-up result is done.
Jul 23 10:05:21 repeater systemd[1]: dev-dahdi-pseudo.device: Job dev-dahdi-pseu
Jul 23 10:05:21 repeater systemd[1]: Timed out waiting for device dev-dahdi-pseu
-- Subject: Unit dev-dahdi-pseudo.device has failed
-- Defined-By: systemd
-- Support: https://www.debian.org/support
--
-- Unit dev-dahdi-pseudo.device has failed.
--
-- The result is timeout.
Jul 23 10:05:21 repeater systemd[1]: Dependency failed for Asterisk PBX and tele
-- Subject: Unit asterisk.service has failed
-- Defined-By: systemd
-- Support: https://www.debian.org/support
--
-- Unit asterisk.service has failed.
--
-- The result is dependency.
Jul 23 10:05:21 repeater systemd[1]: asterisk.service: Job asterisk.service/star
Jul 23 10:05:21 repeater systemd[1]: dev-dahdi-pseudo.device: Job dev-dahdi-pseu
Jul 23 10:05:21 repeater sudo[1169]: pam_unix(sudo:session): session closed for
Jul 23 10:06:23 repeater sudo[1370]: repeater : TTY=pts/2 ; PWD=/home/repeater ;
Jul 23 10:06:23 repeater sudo[1370]: pam_unix(sudo:session): session opened for
lines 1316-1338/1338 (END)
Current default time zone: 'Australia/Perth'
Local time is now: Mon Jul 23 09:35:43 AWST 2018.
Universal Time is now: Mon Jul 23 01:35:43 UTC 2018.
grep: /etc/systemd/network/eth0.network: No such file or directory
/usr/local/sbin/net-setup: line 171: [: missing `]'
mv: cannot stat '/tmp/extensions.conf.tmp': No such file or directory
mv: cannot stat '/tmp/echolink.conf.tmp': No such file or directory
mv: cannot stat '/tmp/iax.conf.tmp': No such file or directory
mv: cannot stat '/tmp/modules.conf.tmp': No such file or directory
mv: cannot stat '/tmp/rpt.conf.tmp': No such file or directory
mv: cannot stat '/tmp/savenode.conf.tmp': No such file or directory
mv: cannot stat '/tmp/manager.conf.tmp': No such file or directory
mv: cannot stat '/tmp/usbradio.conf.tmp': No such file or directory
mv: cannot stat '/tmp/simpleusb.conf.tmp': No such file or directory
mv: cannot stat '/tmp/voter.conf.tmp': No such file or directory
Using username "repeater".
repeater@repeater's password:
Anyone got any ideas ??
73
VK6ZGN */Bob/***Bob@Fot.com.au <mailto:Bob@Fot.com.au> Western Australia Mob. 61 (0) 418 902 194 <tel:61%C2%A0%20%280%29%20418%20902%20194>
The contents of this e-mail (including any attachments) may be confidential and privileged. Any unauthorised use of this document or it's contents is prohibited. If you have received this e-mail in error, please notify us immediately and erase this document E&OE
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.