Be sure you have unsquelched discriminator audio. Double check the diode and squelch calibration. Is the receiver the same as you're using for the voters. If not maybe there's something weird about that receiver. On Tue, Jan 9, 2018 at 5:33 PM, Lee Woldanski <ve7fet@tparc.org> wrote:
What firmware are you running in the RTCM?
Sounds like you are looking for the "Chuck Squelch" version that has Chuck's bug fixes in it.
See http://wiki.allstarlink.org/wiki/RTCM_Client for more information.
Lee
On Tue, Jan 9, 2018 at 5:22 PM, Kevin Babich <kevin.babich@gmail.com> wrote:
Hello,
I have an RTCM operational as a Mix-station in an environment with other RTCM’s in voting configuration. The Mix-station RSSI does not appear to represent the actual signal level as a very binary 0 or 255 value is displayed, irrespective of signal level.
I understand a fix for this has been made. As such, can someone please direct me to the location which I might locate it?
Best,
KJB
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Lee Woldanski, AScT VE7FET
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Tim WD6AWP