I also use ‘setup’ to set a static IP address. But setup hammers /etc/resolv.conf so I just go edit i.e. manually. Should look like so for google dns, use others if you prefer: nameserver 8.8.8.8 nameserver 8.8.4.4 -- Tim :wq On May 4, 2014, at 7:49 PM, Willem Schreuder <willem@prinmath.com> wrote:
On Sun, 4 May 2014, Bob wrote:
After the ACID load is complete, using a DHCP router, I run "setup" from the command prompt, and configure it manually, IP, netmask, gateway, and DSN. When I do this on a WinXp machine in the TC/IP window, connects directly to the public (static) IP just fine. When I do it on the Linux box with ACID, eth0 can't find the connection.
Bob, what you are doing seems correct. I tend to manually edit files, but there is nothing wrong doing it from 'setup'. Bottom line, there is nothing in ACID that prevents this from working. I think you probably just have some field wrong somewhere.
I would approach it bottom up - try pinging the from the AllStar computer to the gateway using IP addresses, then using a symbolic name to test NDS, and work your way up. I bet you will find some subtle misconfiguraton somewhere is causing the problem.
73 Willem
================================================================ Dr. Willem A. Schreuder, President, Principia Mathematica Address: 445 Union Blvd, Suite 230, Lakewood, CO 80228, USA Tel: (303) 716-3573 Fax: (303) 716-3575 WWW: www.prinmath.com Email: Willem.Schreuder@prinmath.com _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.