Do they have discriminator/detector audio?? No they dont! and they also lack PRE/DE on audio..you get "Speaker Audio" complete with hiss. They sound and perform like shit... On Wed, Jun 11, 2014 at 5:22 PM, Jim W7RY <w7ry@centurytel.net> wrote:
Baufongs most certainly do have a cor output. They have a busy light don’t they? YES they do!
There are schematics on the internet for the Baofeng portable. You just have to dig for it.
73 Jim W7RY
*From:* Scott Weis <kb2ear@kb2ear.net> *Sent:* Wednesday, June 11, 2014 12:40 PM *To:* 'Steven Donegan' <steve@donegan.org> ; ''App RPT Users'' <app_rpt-users@ohnosec.org> *Subject:* Re: [App_rpt-users] Does anyone have a working circuit diagramfor Baofeng/Kenwood to URIx?
I doubt you will find much help anywhere. Baofeng radios lack COR and discriminator output so they would not be suitable for use with allstar. The only portable I know of that works is the Kenwood F6 with it mic/speaker port set for packet mode. But the duty cycle required for allstar or any repeater/remote base is fairly high and portables are not suitable for long term use.
*From:* app_rpt-users-bounces@ohnosec.org [mailto: app_rpt-users-bounces@ohnosec.org] *On Behalf Of *Steven Donegan *Sent:* Wednesday, June 11, 2014 3:21 PM *To:* 'App RPT Users' *Subject:* [App_rpt-users] Does anyone have a working circuit diagram for Baofeng/Kenwood to URIx?
I am looking for a circuit diagram so I can fabricate a cable to connect a URIx to a Baofeng (or pair of Baofeng's) suitable for use with ACID/Allstar. Any assistance would be useful. I have not found anything on the web thus far...
____________ Steven Donegan KK6IVC SSCC/NORC Life Member, Car #86 www.sscc.us
------------------------------ _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.