OK I was getting that impression. I have tried the password option, but the problem comes while streaming that remote base audio to the net. Until the password is entered it does not pass the audio through to the stream... We may just go back the private node option again. Thanks for the info guys Regards, Ross kc7rjk From: Tim Sawyer Sent: Sunday, December 15, 2013 1:56 PM To: Ross Johnson Cc: App_rpt Subject: Re: [App_rpt-users] Node filtering Not limit connects per-say but you can have a login. Alison will prompt for a password when you connect. Then you would press *8xxx1 as shown in the example below. See http://ohnosec.org/drupal/node/44 So in you rpt.conf: [1999] authlevel = 2 ; Remote base authentication level [functions-remote] 8xxx1=remote,99,OK,E ; Users 8xxx2=remote,99,W6ABC,E ; User W6ABC 8xxx3=remote,99,K6ABC,E ; User K6ABC -- Tim :wq On Dec 15, 2013, at 1:24 PM, Ross Johnson <kc7rjk@comcast.net> wrote: so I'm guessing there's not a way? Or it's so simple I missed it? Ross Ross Johnson <kc7rjk@comcast.net> wrote: Hello Group, I was wondering if it was possible to only allow specific nodes to connect to a remote base node??? Thanks Guys, Ross www.kc7rjk.net _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users