I can't remember if its using Rasbian. Try "raspi-config" http://elinux.org/RPi_raspi-config David KE6UPI -- Thanks, David "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson On Mon, Sep 4, 2017 at 6:16 AM, Jeremy Utley <jerutley@gmail.com> wrote:
Sure it's possible. Can't remember if it inclues the raspi-config tool, but if not, you can run fdisk, change the partition size to use the entire sd card, reboot, then run resize2fs. However, this isn't always advised, as leaving some unpartitioned space will help the longevity of a SD card.
Jeremy, NQ0M
-----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Bob Sent: Sunday, September 3, 2017 9:17 PM To: 'Users of Asterisk app_rpt' <app_rpt-users@lists.allstarlink.org> Subject: [App_rpt-users] RPi Memory Usage
Is it possible to use the entire MicroSD memory space in the RPi load? It appears I'm only using about 6 GB of 32GB, and I'm not finding fs_resize.
Thanks, Bob
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.