Is it possible to use the entire MicroSD memory space in the RPi load? It appears I'm only using about 6 GB of 32GB, and I'm not finding fs_resize. Thanks, Bob
Sure it's possible. Can't remember if it inclues the raspi-config tool, but if not, you can run fdisk, change the partition size to use the entire sd card, reboot, then run resize2fs. However, this isn't always advised, as leaving some unpartitioned space will help the longevity of a SD card. Jeremy, NQ0M -----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Bob Sent: Sunday, September 3, 2017 9:17 PM To: 'Users of Asterisk app_rpt' <app_rpt-users@lists.allstarlink.org> Subject: [App_rpt-users] RPi Memory Usage Is it possible to use the entire MicroSD memory space in the RPi load? It appears I'm only using about 6 GB of 32GB, and I'm not finding fs_resize. Thanks, Bob _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
I can't remember if its using Rasbian. Try "raspi-config" http://elinux.org/RPi_raspi-config David KE6UPI -- Thanks, David "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson On Mon, Sep 4, 2017 at 6:16 AM, Jeremy Utley <jerutley@gmail.com> wrote:
Sure it's possible. Can't remember if it inclues the raspi-config tool, but if not, you can run fdisk, change the partition size to use the entire sd card, reboot, then run resize2fs. However, this isn't always advised, as leaving some unpartitioned space will help the longevity of a SD card.
Jeremy, NQ0M
-----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Bob Sent: Sunday, September 3, 2017 9:17 PM To: 'Users of Asterisk app_rpt' <app_rpt-users@lists.allstarlink.org> Subject: [App_rpt-users] RPi Memory Usage
Is it possible to use the entire MicroSD memory space in the RPi load? It appears I'm only using about 6 GB of 32GB, and I'm not finding fs_resize.
Thanks, Bob
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Thanks David, great link! Bob _____ From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of David Shaw Sent: Monday, September 04, 2017 6:46 AM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] RPi Memory Usage I can't remember if its using Rasbian. Try "raspi-config" http://elinux.org/RPi_raspi-config David KE6UPI -- Thanks, David "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson On Mon, Sep 4, 2017 at 6:16 AM, Jeremy Utley <jerutley@gmail.com> wrote: Sure it's possible. Can't remember if it inclues the raspi-config tool, but if not, you can run fdisk, change the partition size to use the entire sd card, reboot, then run resize2fs. However, this isn't always advised, as leaving some unpartitioned space will help the longevity of a SD card. Jeremy, NQ0M -----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@ <mailto:app_rpt-users-bounces@lists.allstarlink.org> lists.allstarlink.org] On Behalf Of Bob Sent: Sunday, September 3, 2017 9:17 PM To: 'Users of Asterisk app_rpt' <app_rpt-users@lists. <mailto:app_rpt-users@lists.allstarlink.org> allstarlink.org> Subject: [App_rpt-users] RPi Memory Usage Is it possible to use the entire MicroSD memory space in the RPi load? It appears I'm only using about 6 GB of 32GB, and I'm not finding fs_resize. Thanks, Bob _______________________________________________ App_rpt-users mailing list App_rpt-users@lists. <mailto:App_rpt-users@lists.allstarlink.org> allstarlink.org http://lists.allstarlink.org/ <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/ <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists. <mailto:App_rpt-users@lists.allstarlink.org> allstarlink.org http://lists.allstarlink.org/ <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/ <http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users> cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
As for the re-writes. The only thing I can think of would be the ASL logs. You can use a USB stick and mount it. Then point ASL log's to the USB stick. But, I would check with the card manufacturer on the re-write limit. I can say I have had no problems if card failing do to re-writes. If you have a good card go for it. If you have a cheap card. Go out and get a good one. I have a RASPBX running for 3 years and no problems. David -- Thanks, David "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson On Mon, Sep 4, 2017 at 9:03 AM, Bob <k6ecm1@gmail.com> wrote:
Thanks David, great link!
Bob
------------------------------
*From:* App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] *On Behalf Of *David Shaw *Sent:* Monday, September 04, 2017 6:46 AM *To:* Users of Asterisk app_rpt *Subject:* Re: [App_rpt-users] RPi Memory Usage
I can't remember if its using Rasbian. Try "raspi-config"
http://elinux.org/RPi_raspi-config
David
KE6UPI
--
Thanks, David
"Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one."
Thomas Jefferson
On Mon, Sep 4, 2017 at 6:16 AM, Jeremy Utley <jerutley@gmail.com> wrote:
Sure it's possible. Can't remember if it inclues the raspi-config tool, but if not, you can run fdisk, change the partition size to use the entire sd card, reboot, then run resize2fs. However, this isn't always advised, as leaving some unpartitioned space will help the longevity of a SD card.
Jeremy, NQ0M
-----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Bob Sent: Sunday, September 3, 2017 9:17 PM To: 'Users of Asterisk app_rpt' <app_rpt-users@lists.allstarlink.org> Subject: [App_rpt-users] RPi Memory Usage
Is it possible to use the entire MicroSD memory space in the RPi load? It appears I'm only using about 6 GB of 32GB, and I'm not finding fs_resize.
Thanks, Bob
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/c gi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Understand. My time is worth far more than a cheep card. The mountain location is a way off :-) Thanks, Bob Sent from my iPhone
On Sep 4, 2017, at 10:30 AM, David Shaw <shawpbx@gmail.com> wrote:
As for the re-writes. The only thing I can think of would be the ASL logs. You can use a USB stick and mount it. Then point ASL log's to the USB stick. But, I would check with the card manufacturer on the re-write limit. I can say I have had no problems if card failing do to re-writes. If you have a good card go for it. If you have a cheap card. Go out and get a good one. I have a RASPBX running for 3 years and no problems.
David
-- Thanks, David
"Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson
On Mon, Sep 4, 2017 at 9:03 AM, Bob <k6ecm1@gmail.com> wrote: Thanks David, great link!
Bob
From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of David Shaw Sent: Monday, September 04, 2017 6:46 AM To: Users of Asterisk app_rpt Subject: Re: [App_rpt-users] RPi Memory Usage
I can't remember if its using Rasbian. Try "raspi-config"
http://elinux.org/RPi_raspi-config
David
KE6UPI
--
Thanks, David
"Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one."
Thomas Jefferson
On Mon, Sep 4, 2017 at 6:16 AM, Jeremy Utley <jerutley@gmail.com> wrote:
Sure it's possible. Can't remember if it inclues the raspi-config tool, but if not, you can run fdisk, change the partition size to use the entire sd card, reboot, then run resize2fs. However, this isn't always advised, as leaving some unpartitioned space will help the longevity of a SD card.
Jeremy, NQ0M
-----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Bob Sent: Sunday, September 3, 2017 9:17 PM To: 'Users of Asterisk app_rpt' <app_rpt-users@lists.allstarlink.org> Subject: [App_rpt-users] RPi Memory Usage
Is it possible to use the entire MicroSD memory space in the RPi load? It appears I'm only using about 6 GB of 32GB, and I'm not finding fs_resize.
Thanks, Bob
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
Thanks Jeremy for the pointer. I'd also like to understand what it is about leaving some unpartitioned space that will help the longevity of an SD card. It is my understanding the write cycles are a function of write cycles, not space... been wrong before, and willing to learn something new. Thanks, Bob -----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Jeremy Utley Sent: Monday, September 04, 2017 6:17 AM To: 'Users of Asterisk app_rpt' Subject: Re: [App_rpt-users] RPi Memory Usage Sure it's possible. Can't remember if it inclues the raspi-config tool, but if not, you can run fdisk, change the partition size to use the entire sd card, reboot, then run resize2fs. However, this isn't always advised, as leaving some unpartitioned space will help the longevity of a SD card. Jeremy, NQ0M -----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Bob Sent: Sunday, September 3, 2017 9:17 PM To: 'Users of Asterisk app_rpt' <app_rpt-users@lists.allstarlink.org> Subject: [App_rpt-users] RPi Memory Usage Is it possible to use the entire MicroSD memory space in the RPi load? It appears I'm only using about 6 GB of 32GB, and I'm not finding fs_resize. Thanks, Bob _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
By allowing unpartitioned space on an SD card, you allow the system to use that as "replacement" space when a segment of an SD card can no longer be used. A similar process is used for SSD drives, and is termed "overprovisioning". In my company's datacenter, we actually use some special hdparm commands to mark about 20% of an SSD's storage space as not being able to be partitioned - allowing for this space to be used in this manner. Jeremy, NQ0M -----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Bob Sent: Monday, September 4, 2017 11:03 AM To: 'Users of Asterisk app_rpt' <app_rpt-users@lists.allstarlink.org> Subject: Re: [App_rpt-users] RPi Memory Usage Thanks Jeremy for the pointer. I'd also like to understand what it is about leaving some unpartitioned space that will help the longevity of an SD card. It is my understanding the write cycles are a function of write cycles, not space... been wrong before, and willing to learn something new. Thanks, Bob -----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Jeremy Utley Sent: Monday, September 04, 2017 6:17 AM To: 'Users of Asterisk app_rpt' Subject: Re: [App_rpt-users] RPi Memory Usage Sure it's possible. Can't remember if it inclues the raspi-config tool, but if not, you can run fdisk, change the partition size to use the entire sd card, reboot, then run resize2fs. However, this isn't always advised, as leaving some unpartitioned space will help the longevity of a SD card. Jeremy, NQ0M -----Original Message----- From: App_rpt-users [mailto:app_rpt-users-bounces@lists.allstarlink.org] On Behalf Of Bob Sent: Sunday, September 3, 2017 9:17 PM To: 'Users of Asterisk app_rpt' <app_rpt-users@lists.allstarlink.org> Subject: [App_rpt-users] RPi Memory Usage Is it possible to use the entire MicroSD memory space in the RPi load? It appears I'm only using about 6 GB of 32GB, and I'm not finding fs_resize. Thanks, Bob _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
participants (4)
-
Bob -
Bob Pyke
-
David Shaw -
Jeremy Utley