Re: [App_rpt-users] Advise for setupThe best option would be to modify the repeaters PL to only be active during cos/cor, You may be able to add a second tone but that could cause other audio issues, but I have seen it done with success. Good luck Ross www.kc7rjk.net From: Angelo Glorioso Sent: Wednesday, November 13, 2013 6:48 AM To: Keith Goobie ; app_rpt mailing list Subject: Re: [App_rpt-users] Advise for setup Hi Keith, Yes the repeater is using PL but the PL does not drop with the COS/COR. It stays running the whole time including the squelch tail. This maybe on of the issues. 73 de Angelo PS: any configurations files you would like to share? ----- Original Message ----- From: Keith Goobie To: Angelo Glorioso ; app_rpt mailing list Sent: Wednesday, November 13, 2013 8:39 AM Subject: Re: [App_rpt-users] Advise for setup If you are using PL on the repeater, they maybe some options for you. If you are not using PL, then you will have to look at options where a shorter squelch tail is used. We run similar setups here at some of sites taking advantage of PL to give the desired results. We are using USBradio. Keith On 11/13/13 9:01 AM, "Angelo Glorioso" <n5uxt@hotmail.com> wrote: Good All, We have a node coming up in Lake Charles, La and we are having issues. So, I am asking for configurations suggestion. First off, the Allstar node is not going to be at the repeater site. It is at a remote site. It is running on GM300 with URI interface. The repeater has a long squelch tail of about 2 second. I have tried to run with USB radio in half duplex mode but the node ends up ping ponging with the repeater in half duplex mode . Is it better to use simpleusb or USBradio for this type of setup?? Should the repeater squelch be reduced or turned off all together. Please offer a copy of either USBradio or simpleusb configuratio file pretty please. Any help would be appreciated. 7 3 de Angelo ---------------------------------------------------------------------------- _______________________________________________ App_rpt-users mailing list wlmailhtml:App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -- wlmailhtml:keith@goobie.org Keith Goobie Richmond Hill, ON, CANADA -------------------------------------------------------------------------------- _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users