I was trying to reconfigure a node remotely that had been using usbradio. I probably just didn't have something set right. I'll do a better test when I get some time. I was mainly curious if there was any documentation on simpleusb. Thanks, Steve On Feb 4, 2011 1:30 PM, "Tim Sawyer" <tim.sawyer@me.com> wrote:
Yes, simpleusb is what I'm using on my nodes. What isn't working for you? -- Tim :wq
On Feb 4, 2011, at 11:25 AM, Steve Passmore wrote:
Would it make sense to use simpleusb when doing this? I've tried to use simpleusb but haven't had much luck. Is there any documentation on it?
Thanks, Steve
On 2/4/2011 6:17, Tim Sawyer wrote:
This board is for when your controller has only one port or no free
ports. If you have a free port, app_rpt works perfectly fine with your existing controller. Just set duplex=0 and linktolink=yes.
--- TIS
On Feb 3, 2011, at 8:15 AM, Jim Duuuude wrote:
Not necessarily. We have a simple board (user-buildable project) that does that very nicely. I you have a standalone repater already hooked up to a controller this board can be put in-between them and it makes it into a very nice adjunct.
JIM WB6NIL
Date: Thu, 3 Feb 2011 11:09:34 -0500 From: kc2wdz@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] app-rpt with external repeater controller possible?
Is it possible to use a repeaters external controller and just use app-rpt for it's linking capabilities? I'm guessing there would be no way of avoiding the repeater id's and messages being sent out to any linked repeater nodes.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.orghttp:// ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users