Does anyone know the correct settings for the RTCM in a voting configuration? Menus 8 - GPS Data Protocol (0=NMEA, 1=TSIP) (0) 9 - GPS Serial Polarity (0=Non-Inverted, 1=Inverted) (0) 10 - GPS PPS Polarity (0=Non-Inverted, 1=Inverted, 2=NONE) (0) I believe 8 is correct I know the baud rate is 4800 tested it on the garmin software - not sure about the serial polarity/PPS polarity - I believe it is hooked up correctly - the time shows not set on the RTCM, and I lose connection to the allstar/asterisk box - once I set PPS polarity to 2 then it reconnects - this is setup as the master site for now - Right now they are both on the same LAN - If anyone has any other example configs for voter.conf, etc that would be great too, make sure there isn't some other setting for it. 73s Mark