Well Ray, "IF" you are only testing with a node behind your NAT (router) you will need a definition to route it from each node behind the NAT. example in rpt.conf 29261 = radio@127.0.0.1/29261,NONE ; ,y =remote base 29283 = radio@127.0.0.1/29283,NONE 29284 = radio@127.0.0.1/29284,NONE 29285 = radio@127.0.0.1/29285,NONE <<<end of all on this server 1 29999 = radio@192.168.1.223/29999,NONE <<<<<<<<<<<< on server 2<<<<<<<<<<<< Each node behind your nat will need a address defined to be able to connect to it. ...mike/kb8jnm ----- Original Message ----- From: "Users of Asterisk app_rpt" <app_rpt-users@lists.allstarlink.org> To: <app_rpt-users@lists.allstarlink.org> Cc: Sent: Sun, 26 Mar 2017 17:18:46 -0400 Subject: [App_rpt-users] 2 nodes from the same ip address. Hello, I know I've asked this question before, I have one node for my repeater and its a full time connection to a hub and the other node is a portable node to connect to other nodes. They are both on the same Internet connection. I can connect outbound to some nodes and some not but I don't get in bound connections. My nodes are on two separate servers and have two separate ports. Is there something I'm missing? Any help is appreciated! Thank you. 73 Ray, W2RJR